Safety Tips

深圳市创世达实业股份有限公司
RC1.PD20
2021-09-18
移动电源
说明书
A
说明书
成品尺寸：70x105mm
材料：100g书写纸
颜色：双面单黑印刷
备注：裁切线和折叠线不要印刷出来
RC1-SMS3894A
封面
封底
4 LEDs o:
immediate
charging
required
1 LED on:
5-25%
power
remaining
2 LEDs on:
25-50%
power
remaining
3 LEDs on:
50-75%
power
remaining
4 LEDs on:
75-100%
power
remaining
1. To charge your device, connect using an appropriate cable to the
power bank via Type-C port.
2. The power bank will automatically recognise it is connected and will
begin charging your device.
3. Ensure your device is on when charging to verify the connection is
correct and charging commences.
4. When charging your device the white indicator lights on the power
bank will illuminate. If the light are not illuminated, it means the power
bank has shut o or needs charging.
5. Charge/discharge your power bank every 3 months when not is use for
long periods of time to ensure the longevity of the power bank battery.
Note: fast charge output to a mobile device requires the use of a USB
Type-C to Type-C cable. Fast charge input also requires a Type-C cable as
well a power source with sucient power.
1. Place your wirelessly enabled device over the charging area on the
back of the power bank, indicated by the circle. Ensure this area on the
power bank is free of debris and metal objects.
2. If your device has MagSafe, it will magnetcally align and attach to the
power bank itself.
3. Press the power indicator button on the power bank to commence
charging.
4. Ensure your device is turned on to verify charging has commenced.
5. Once charging is complete or the device is removed, the power bank
will automatically turn o.
CHARGING YOUR DEVICE VIA TYPE-C PORT
SPECIFICATIONS
1. Connect the USB charging cable to your Trusda FLUX 10W Wireless
Power Bank via Type-C port.
2. Connect the USB charging cable to a power source,such as a wall
charging or computer, via USB-A port.
3. Charging is conrmed when the LED indicators on the power bank start
to ash.
4. Charge until all 4 LED indicators are illuminated and no longer ashing.
CHARGING YOUR POWER BANK
CHECKING THE POWER LEVEL
1. Press the power indicator button located next to the Type-C port on
your power bank.
2.The illuminated lights dene the power remaining in the power bank:
4 lights: 75%-100% 1 lights: 5%-25%
3 lights: 50%-75% 1 lights ashing: 0%-5%
2 lights: 25%-50%
3.When only one light is ashing or if none of the light are on, it is time to
charge the power bank.
Wireless charging is designed to work on cases up to 3mm in depth.
Trusda cannot guarantee that your device will charge if you have
attached a case thicker than 3mm on to your mobile device. Please
ensure that you remove any cases or covers before wireless charging as
they may reduce the charging eciency. If using a case, Trusda
recommends using a MagSafe or compatible with MagSafe case to
achieve optimal charging eciency and to ensure secure and accurate
magnetic alignment.
WIRELESSLY CHARGING MOBILE DEVICES WITH CASES:
Your Trusda FLUX 10W Wireless Power Bank is pass-through charging
enabled, meaning it can simultaneously wirelessly charge a device while
itself is being charged via the Type-C port. As pass-through charging is
automatic, please follow the same directions for charging the power
bank and wireless charging your device.
PASS-THROUGH CHARGING
Your Trusda FLUX 10W Wireless Power Bank can simultaneously charge
two devices via the Type-C port and through wireless power output. To
achieve this, follow the same directions for wired and wireless charging.
CHARGE TWO DEVICES
1. Keep the power bank away from excessive heat, direct sunlight,
humidety, water or other liquids.
2. To prevent electrical shock, explosion and/or injury;
-Do not use in temperatures of 60°C+ or in direct sun.
-Do not open the battery casing under any circumstances.
-Do not use this unit for anything other than its intended purpose.
-Do not operate the power bank if it has been wet or damanged.
-Do not operate the power bank with wet hands.
-Do not cover the power bank or place on top of other electrical devices.
SAFETY TIPS
3. Keep ports free from dust, lint etc. that may intefere with connections.
4. The power bank is not a toy-keep out of reach of children.
FCC Statement
WIRELESSLY CHARGING YOUR DEVICE
INPUT
OUTPUT
1. USB-C 5V/2.4A, 9V/2A
1. USB-C
2. Wireless 5W/7.5W/10W
Trusda FLUX 10W Wireless
POWER BANK (5,000mAh)
PACK CONTENTS
Trusda FLUX 10W
WIRELESS POWER BANK
30cm USB-A TO TYPE-C
CHARGING CABLE
INSTRUCTIONS
AND WARRANTY
105mm
70mm
5V/3A(QC protocol), 5V/2.4A
(PD protocol), 9V/2.22A,12V 1.67A
This device complies with part 15 and part 18 of the FCC Rules.
Operation is Subject
To the following two conditions:
(1) This device may not cause harmful interference, and (2) this
devicemust accept any interference received, including interference that
may cause undesired operation. Changes or modifications not explicitly
approved
by the partyresponsible for compliance could void the
user's authority tooperate this equipment.
Note: this equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 and part 18 of
the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and canradiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference toradio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged totry to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. The
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of
15cm surrounding the device and 20 cm above the top surface of the
device must be respected.
This device complies with Part 18 of the FCC Rules. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. If this equipment does
cause harmful interference to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Increase the separation between the equipment and any other radio
device.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.