User Guide OMLOX SATELLITE
© 2020 TRUMPF The copyrights in this user guide and the system described therein are owned by the company TRUMPF Werkzeugmaschinen GmbH + Co. KG (hereafter also referred as " TRUMPF "). TRUMPF, the TRUMPF logo, omlox and the omlox logo are registered trademarks. All other brand names, product names, or trademarks belong to their respective holders. TRUMPF Werkzeugmaschinen GmbH + Co. KG, Johann-Maus-Str.2; 71254 Ditzingen, Germany Contact information: see back cover.
Table of contents 1. Introduction 1 2. Safety and compliance information 2 3. Specification 4 3.1. 3.2. 3.3. 3.4. 4. 4.1. 4.2. Datasheet Hardware overview Antenna radiation patterns Equipment needs System configurations IP assignment for omlox Satellites omlox Satellite used as Wi-Fi access point 4 5 7 8 9 9 9 5. Deployment instructions 10 5.1. 5.2. 5.3. omlox Satellite start omlox Satellite placement omlox Satellite control 10 10 10 6.
1. Introduction omlox Satellite is part of TRUMPF RTLS, a real-time locating system which uses Ultra-Wideband (UWB) pulses for real-time 3D location of objects in buildings in various industries. omlox Satellites are used as fixed bases in TRUMPF RTLS. They are synchronized with each other and interface with mobile devices such as WTags and SmartAntennas. The mobile devices are tracked in two modes which can coexist: Multi- Tag Tracking (server-centric) and GPS-like Positioning (device-centric).
2. Safety and compliance information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
EU Conformity Declaration 3 omlox Satellite User Guide
3. Specification 3.1. • • 4 Datasheet Data connections Technology information Wireless: Wi-Fi, Bluetooth, ZigBee, UWB Wired: Ethernet RJ45 cable – Wi-Fi Frequency band: [2400 – 2483.5] MHz Max power (EIRP): 17.5dBm – BLE Frequency band: [2402 – 2480] MHz Max power (EIRP): 4dBm – Zigbee Frequency band: [2405 – 2480] MHz Max power (EIRP): 4dBm – UWB Frequency band: [3250 – 4750] MHz Max Mean power (EIRP): -41.
Light indicators Status Color Position Lighting details Starting Green Mini led on Ethernet connector 1Hz pulsing Supplied Orange Supplied Green Mini led inside of device casing 1Hz pulsing Waiting for server Blue Central 360° RGB LED strip Continuous Identify Green ~1Hz heart beat Connected and muted White Continuous Lighting level 30% Connected, unmuted and scanning White ~1Hz heart beat Connected, unmuted and ranging White Continuous Lighting level 100% On error Red Contin
base view USB C connector individual label Ethernet connector pulsing green mini LED (starting status) continuous orange mini LED (power supply) individual label 6 omlox Satellite User Guide
3.3. Antenna radiation patterns The 3D radiation pattern of omlox Satellite's omni-directional antenna is similar to a thick torus shape. Radiation pattern and diagrams following different planes complete device PCB 330 310 340 350 8.0 0 10 20 2.0 320 30 330 40 -4.0 340 320 50 300 70 -28.0 260 250 12 230 130 220 140 210 150 170 180 Azimuth 7 40 340 80 280 90 270 100 260 160 50 10 20 30 40 -4.0 50 -10.0 60 30 70 80 280 90 270 100 260 60 -16.0 -22.
3.4.
4. System configurations 4.1. IP assignment for omlox Satellites Within TRUMPF RTLS, every omlox Satellite is given an own IP address by a DHCP server.
5. 5.1. Deployment instructions omlox Satellite start To start omlox Satellite, just connect the corresponding cable: PoE or USB C. If you plug a PoE cable, the green and orange LED on the Ethernet port light on. If you plug a USB cable, a green LED inside the casing lights on. 5.2. omlox Satellite placement ▶see table in section 3.
6. Ask for support We offer standardized as well as customized solutions. Please note that all documents may be updated without notice to individual customers beforehand. We provide remote assistance by e-mail at sven.futschik@trumpf.com.[WJ1][WE2] In case of support request, please indicate your system references.
Johann-Maus-Str. 2 71254 Ditzingen Germany Telephone +49 7156 3030 Fax +49 7156 30330309 mailto:info@de.trumpf.