Read, keep and use all safety instructions Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel.
REGULATORY INFORMATION Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Trulli Audio might cause harmful interference and void the FCC authorization to operate this product. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
REGULATORY INFORMATION DO NOT attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Eagle Acoustics retailer or other qualified professional for removal. Please dispose of used batteries properly, following local regulations. Do not incinerate. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling.
CONTENTS What’s in the box? .......................................................................................................................... 6 Placement guidelines ...................................................................................................................... 9 Connecting to power .................................................................................................................... 10 Operating your JAM5 speaker .................................................
GETTING STARTED What’s in the box? TRULLI JAM5 USB Type-C Cable USB Type-C wall charger www.TRULLIAUDIO.
Getting Started JAM5 carrying strap JAM5 strap connectors Quick Start Guide Control + Buttons card www.TRULLIAUDIO.
Getting Started Quick Start: www.TRULLIAUDIO.
Getting Started Placement guidelines • • • For best Bluetooth® performance, place your mobile device within 30 ft. (10 m) of your speaker, and make sure there is a clear line of sight between you and your speaker. Moving your device farther away, or not having a clear line of sight may impact sound quality, and your device may disconnect from your speaker. Keep other wireless equipment at least 3 ft. (1 m) away from your speaker.
Getting Started Connecting to power Note: Your JAM5 ships with a partial charge. 1. Plug either end of the USB-C cable into the USB-C connector on your speaker. 2. Plug the other end into the USB-C power supply. 3. Plug the USB power supply into an AC (mains) outlet. www.TRULLIAUDIO.
Getting Started Operating your JAM5 speaker www.TRULLIAUDIO.
BLUETOOTH® TECHNOLOGY Pairing your mobile device When you power on your speaker for the first time, the speaker automatically searches for your mobile device. 1. On your device, turn on the Bluetooth® feature. Tip: The Bluetooth® feature is usually found in the Settings menu. 2. Select your Trulli JAM5 from the Bluetooth® device list. Once paired, you will hear “Pairing successful” www.TRULLIAUDIO.
BLUETOOTH® TECHNOLOGY Pairing an additional mobile device You can store up to eight paired mobile devices in the speaker pairing list. Press and hold the + and - until you hear, “Pairing.” Pair your device to the speaker Reconnecting a device When powered on, the JAM5 tries to reconnect with the two most recently connected devices. Note: The devices must have Bluetooth on and powered on. www.TRULLIAUDIO.
STATUS INDICATORS You can store up to eight paired mobile devices in the speaker pairing list, and your speaker can be actively connected to two mobile devices at a time. Note: You can only play audio from one device at a time. Switching between two connected devices 1. Pause audio on your first device. 2. Play audio on your second device. Clearing JAM5 Device History 1. Press + and - until you hear “Factory reset.” All devices are cleared and your speaker is ready to pair a new device. 2.
STATUS INDICATORS Battery indicator To check the battery charge level, tap the + and - quickly The JAM5 will display the level of battery on the LED bars. Note: Battery performance varies with the content played and the volume level at which it is played. In typical use, the speaker battery lasts up to 16 hours. www.TRULLIAUDIO.
Pairing two JAM5s together Pairing the speakers manually True Wireless Stereo mode 1. Make sure both speakers are powered on. 2. Make sure one and only one speaker is connected to your mobile device. 3. On the speaker connected to your device, press and hold and + simultaneously. 4. Release the buttons when you see the LED bar scanning 5. On the other speaker, press and hold and – simultaneously. 6. Release the buttons when see the LED bar scanning.
CARE AND MAINTENANCE Cleaning • Clean the surface of the speaker and handle with a soft, damp cloth (water only). • Do not use any sprays near the speaker. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia or abrasives. • Do not allow liquids to spill into any openings. Limited warranty Your speaker is covered by a limited warranty. Details of the limited warranty are provided on the warranty card in the carton.
TROUBLESHOOTING Contact Us No question is too big or too small. Website TRULLIAUDIO.com/Support Email Alexa@TRULLIAUDIO.com Telephone US and Canada (English) (877) 932-3245 www.TRULLIAUDIO.
TROUBLESHOOTING Common solutions The following table lists symptoms and possible solutions to common problems. No power (battery) • Battery may be discharged. Connect it to AC (mains) power. Battery does not charge • • Make sure you are using the Trulli Audio provided USB cable and USB wall charger. Connect to a different AC (mains) power source. Speaker does not pair with mobile device • • • • On your mobile device, turn the Bluetooth® feature off and then on.
TROUBLESHOOTING • • • Use a different cable. Connect a different device. Check device audio settings. Resetting your speaker Factory reset clears paired mobile devices and language settings from your speaker and returns it to the original factory settings. 1. Power on your speaker. 2. Press + and – for 7 seconds until you hear a tone. 3. The JAM5 will turn off automatically If you could not resolve your issue, see the table below to identify symptoms and solutions to common problems.
THANK YOU, And enjoy your new JAM5. You can follow us on Social media and show yourself using your JAM5.