Data Sheet

ManualsBrandsTRU COMPONENTS ManualsCarsTRU COMPONENTS Solar panel

Datasheet

Solar Cell Module

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by

any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part,

is prohibited. This publication represents the technical status at the time of printing.

o. 2201978 // YH-36X56 // 56 x 36 mm

The solar cell can generate a wide range of voltages (V)

and currents (I). As the resistance of the connected

electrical load increases c

ontinuously, from zero (a short

circuit) to an extremely high value (an open circuit), the

maximum power output can be determined.

The power output can be calculated by the measured output

voltage and current. At maximum power output, the voltage is

and the current is Im.

The maximum power output of a solar panel varies with the

variation in lighting.

Technical data

Vm ................................................................................................. 0.5 V

Im ................................................................................................... 200 mA

Dimension ...................................................................................... 56 x 36 mm

Weight ............................................................................................ 3.78 g

Operation environment................................................................... Outdoors: -20 to +80 °C

Legend

Output characteristic curve

Isc - Short circuit current

Im - Current at maximum power output

Voc - Open circuit voltage

Vm - Voltage at maximum power output

Summary of content (1 pages)

PAGE 1
Datasheet Solar Cell Module No. 2201978 // YH-36X56 // 56 x 36 mm Legend Output characteristic curve Isc - Short circuit current Im - Current at maximum power output Voc - Open circuit voltage Vm - Voltage at maximum power output The solar cell can generate a wide range of voltages (V) and currents (I). As the resistance of the connected electrical load increases continuously, from zero (a short circuit) to an extremely high value (an open circuit), the maximum power output can be determined.