Instructions

LM01GND
LM01RDD
Green
Red
532 nm
650 nm
2
2
Red
Black
USER GUIDE
LM01 Series
Description
The LM01 series is a complete laser diode module with integrated drive electronics and optics in a simple compact package.
This low cost device is designed for experimental and evaluation systems and for OEM use as a component in a variety of
pointer laser system.
Models
Mounting
The plain brass body should be gripped without crushing over its entire length. A split holder is ideal and provides
effective cooling of the laser diode to maximise the operating life. The metal body should be in good thermal
contact with the mount, and should not be allowed to exceed the maximum case temperature.
Power Supplies
The laser module is designed to operate from fixed regulated supply voltages of 3.0V. Althought the case is
isolated from the supply, it is advisable to ensure that neither the case nor supply is floating from ground. If this
is not done, in electrically noisy environments, interference on the supply leads could affect the output of the
module. In extreme cases, the module may be damaged, so proper attention to supplies and grounding is
necessary. Connections are made via a red and black flying leads. The connections are:
Laser Catergory
Wavelength
Colour
Operation
The output from the laser is a continuous wave. Rapid switching of the power supply voltage is not
recommended. Internal slow start protection is included, but may be defeated if the power supply is interrupted
rapidly.
Precautions
Do not connect the power supply leads with power applied. Do not use external laser diode controllers or power
supplies with current limit or slow start circuitry. These may prevent correct operation of the unit and increase
the laser safety hazard.
+Ve supply
-Ve supply