Data Sheet

ManualsBrandsTRU COMPONENTS ManualsActive ComponentsSMD-LED multi-colored0605 Red, White 130 mcd, 500 mcd 120°, 120°20 mA, 20 mA 1.8 V, 2.8 V AL-S0605 SRNWY/50-06 R

■ Typical Applications









 Features :















Package Dimensions:

  



 



Notes:





V1_07092021_01_en

20 21

Distributed by Conrad Electronic SE

1567737

Summary of content (5 pages)

PAGE 1
567737 V1_07092021_01_en ■ Typical Applications ● Automotive: Dashboards, stop lamps, turn signals. ● Backlighting: LCDs, Key pads advertising. ● Status indicators: Consumer & industrial electronics. ● General use. Features : ● Chip Material: AlInGaP/ InGaN ● Lens Color: Water Clear ● Emitted Color: Red /White ● 1.6×1.5×0.6mm (0605) standard package. ● Suitable for all SMT assembly methods. ● Compatible with infrared and vapor phase reflow solder process.
PAGE 2
■ Absolute Maximum Ratings at Ta=25℃: (R) Parameter Symbol Maximum Unit Pd 75 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [2.0mm from body] Topr -25℃ to + 80℃ Tstg -30℃ to + 85℃ Tsol Preheating: 140℃~160℃±5℃, within 2 minutes. Operation heating:260℃(Max) within seconds.(Max) Gradual Cooling (Avoid quenching).
PAGE 3
■ Absolute Maximum Ratings at Ta=25℃: (W) Parameter Symbol Maximum Unit Pd 100 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 120 mA Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [2.0mm from body] Topr -25℃ to + 80℃ Tstg -30℃ to + 85℃ Tsol Preheating: 140℃~160℃±5℃, within 2 minutes. Operation heating:260℃(Max) within seconds.(Max) Gradual Cooling (Avoid quenching).
PAGE 4
■Reliability Test Items The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No 1 Item Reflow Soldering Test Hours/Cycle Sample Size Ac/Re 6 Min. 22PCS 0/1 300 Cycles 22PCS 0/1 300 Cycles 22PCS 0/1 Temp. : 100℃ 1000 Hrs. 22PCS 0/1 Temp. : -40℃ 1000 Hrs. 22PCS 0/1 IF = 20 mA / 25℃ 1000 Hrs. 22PCS 0/1 85℃/85%RH 1000 Hrs. 22PCS 0/1 Test Conditions Temp. : 260℃±5℃ Min. 5 sec.
PAGE 5
■Precautions in Use: Storage Recommend storage environment Temperature：5℃～30℃ (413F～863F) Humidity：60% RH Max. Use within 7 days after opening of sealed vapor/ESD barrier bags. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. Fold the opened bag firmly and keep in dry environment.