Functional description Tron TR30 AIR components An overview of the radio components.
1 Antenna TR30 AIR 2 Volume, squelch and monitor control 3 Loudspeaker 4 Up button 5 Down button 6 Backlight button 7 Emergency mode indicator 8 Frequency indicator 9 Microphone 10 Squelch and signal strength indicator 11 Transmitter power indicator 12 Battery status indicator 13 Volume control indicator 14 Key unlock button 15 Enter button 16 121.
1 Operation instructions 1.1 Emergency mode The TR30 AIR shall only be used with emergency battery, or test battery. The emergency battery is for use in a distress situation. In case of a test or training, use a test battery. If the jack cover is removed, for example when using an accessory, the radio is no longer waterproof. Function: The antenna and jack cover must be correctly assembled on the radio in order for it to be completely waterproof.
1.4 Volume adjustment Function: Display screen: Volume adjustment 1.Turn the volume control to adjust the volume. The volume symbol in the display indicates the volume level. Ensure that you do not press down the volume control while adjusting the volume. 1.5 Squelch adjustment Function: Display screen: Squelch adjustment The squelch bar appears on the screen display indicating the current active sensitivity level. When adjusted fully to the left, the squelch is completely open.
A key symbol appears when the radio is locked. PTT, Instant access 121.5MHz, volume and squelch are still available when the radio is locked. 1.7 Menus Press the up/down arrow buttons at the same time to enter or exit the menu system. Use the up/down arrow buttons to navigate and select using Scan/Enter. Exit: Display screen: Use this menu option to exit the menu system.
Key sound: Display screen: Menu number: Use this menu option to choose an audio tone. 1.1 You can choose between four different tones. Using the up/down arrow keys, select from 1-4. Key volume: Display screen: Use this menu option to set the volume of the key sound. Menu number: 1.2 (Off=0, low to high=1-6) Backlight time: Use this menu option to set the time while the Backlight is on (1-10 seconds). The backlight will go off automatically. Display screen: Menu number: 1.
Backlight level: Display screen: Use this menu option to set the displaybacklight level. (Off=0, low=1 or high=2 Contrast: 1.4 Display screen: Use this menu option to set the display contrast level (Low=1, medium= 2 or high=3) Key lock time Display screen: Use this menu option to access the following information: Serial Number SW version HW version Serial Number: Menu number: 1.6 Display screen: Menu number: 1.
Use this menu option to find the serialnumber of the radio SW Version: 2.1 Display screen: Use this menu option to find the softwareversion of this radio. HW Version: Use this menu option to find the hardwareversion of this radio. Menu number: 2.2 Display screen: Menu number: 2.