Instructions / Assembly

Installation & Assembly Instructions

Please contact Customer Service with any questions at:

30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ support@tritonproducts.com

For a full line of products visit www.tritonproducts.com 1

Read all instructions completely before installing. Should you have any questions about your

installation, please call Customer Service at 440-248-5480

Tools needed for this installation (Not Supplied with Kit)

Level - Pencil or marker - Phillips head screw driver – Electric drill – ½” Standard drill bit for hollow

wall installation – Safety glasses – 5/16” Masonry bit for concrete block installation – 1/16” Standard

drill bit for stud wall installation – Tape measure

Hang Rail Model #1701 must be used with Top Track 1700

(Shown below purchased separately)

1701 Top Track Wall Frame & Hardware

PAGE 1
Installation & Assembly Instructions 1701 Top Track Wall Frame & Hardware Read all instructions completely before installing.
PAGE 2
Installation & Assembly Instructions Top track already installed: (above) Assemble with hang rail slotted ends to outside. Make sure notches are at the far end of assembled hang rail and space the hang rails on the Top Track 30-3/8” apart measured inside (between) the hang rails. Please contact Customer Service with any questions at: 30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ support@tritonproducts.com For a full line of products visit www.tritonproducts.
PAGE 3
Installation & Assembly Instructions Please contact Customer Service with any questions at: 30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙ support@tritonproducts.com For a full line of products visit www.tritonproducts.
PAGE 4
Installation & Assembly Instructions LIMITED LIFETIME WARRANTY: Triton Global Products are backed by a Limited Lifetime Warranty to the original owner that our products are free from defects in material and workmanship.