Product Data Sheet / Brochure

HDMI Audio/Video with RS-232 Serial and IR Control
over IP Receiver, 1920 x 1080 (1080p) @ 60 Hz, 328
ft. (100 m)
MODEL NUMBER: B160-100-HDSI
Description
The B160-100-HDSI HDMI Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and
distributes HDMI/DVI video (adapter cable included for connecting DVI display), RS-232 serial and IR (infrared)
remote signals through a dedicated Ethernet network switch* located up to 328 feet (100 m) away. With an
additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).
The B160-100-HDSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect
up to 64 transmitters and 255 receivers in a single managed switch installation.**
The B160-100-HDSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. It works with any analog or digital source, including DisplayPort and VGA.
It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to
57600 Bps.
Compatible with Tripp Lite’s B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.
*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or
non-functional performance.
**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.
Features
Extends and Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling
Converts source video to IP-based signal transmitted to and distributed through network switch
Adapter cable included for connecting a DVI display
Extends signal up to 328 ft. (100 m) from switch
Highlights
Designed for managed network
switches with IGMP
Compatible with all analog or
digital sources
Supports video resolutions up to
1920 x 1080 (1080p)
Plug and play—no software or
drivers required
Mounts on wall, rack or pole with
included hardware
Package Includes
Receiver unit
External power supply w/NEMA
1-15P plug (Input: 100–240V,
50/60 Hz, 0.5A; Output: 5V, 2A)
Plug adapters for U.S., U.K.,
Europe and Australia
IR-In cable
HDMI to DVI adapter cable
Mounting hardware
Owner’s manual
1 / 3