Manual

DVI over Cat5/Cat6 Active Extender Kit, Box-
Style Video Transmitter & Receiver, 1920x1080 at
60Hz, Up to 200-ft., TAA
MODEL NUMBER: B140-101X
Transmit a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable
Description
The B140-101X is a DVI Over Cat5 Active Extender Kit that comes with both transmitter and receiver
units. It transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To
achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-
Series). The B140-101X is compatible with all operating systems, and is plug and play, with no software or
drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant
with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple. Connect a the built-in DVI connector on the transmitter unit to a DVI source. Connect
the receiver unit to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the RJ45
ports on the transmitter and receiver units are connected using a single Cat5e/6 cable. A 1920 x 1080 @
60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft.
Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four
remote units (three repeaters and one active receiver) in a single chain, for a total of 4 displays. (An active
receiver should be the last unit in a chain) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft.
from each repeater to the next unit in the chain, or a 1024 x 768 @ 60Hz signal can be extended up to
175 ft.
Features
Extender kit comes with transmitter and receiver units
●
Transmit a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable
●
Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz
●
Extends a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft.
●
Highlights
Extender kit comes with
transmitter and receiver units
●
Supports DVI-D Single-Link
video resolutions up to 1920 x
1080 @ 60Hz
●
Extends a 1920 x 1080 @ 60Hz
signal up to 150 ft., or a 1024 x
768 @ 60Hz signal up to 200 ft.
●
Use 24AWG, Solid Wire Cat5e/6
cable, such as Tripp Lite's
N202-Series, to achieve
maximum distance and
resolution
●
Can further expand the range
and number of monitors by
adding B140-110 repeaters
●
Compatible with all operating
systems
●
Plug and play, no software or
drivers required
●
Features a built-in Equalization
control for adjustment of the
video image
●
Compliant with the Federal
Trade Agreements Act (TAA) for
GSA Schedule purchases
●
System Requirements
For international use, a power
supply with the appropriate plug
type must be purchased
separately.
●
Package Includes
B140-101X local transmitter unit
●
B140-101X remote receiver unit
●
Screwdriver (used for
Equalization control)
●
1 / 3