pr ch re R W od an gis EG AR uc ce te I t— to r o ST RA ww w nlin RA NT w. in a e TI Y tri F tod O pp R a N lit EE y f : e.
Table of Contents Package Contents 3 Product Features All B130-101 B130-101A B130-101-WP-1 B130-101A-WP-1 B130-101S B130-111 B130-111A B130-101-U B132-002-1 B132-002A B132-004-1 B132-004A B132-100-1 B132-100A B132-100-WP-1 B132-100A-WP-1 B132-110 B132-110A 4 4 4 4 4 5 5 5 6 6 6 6 7 7 8 8 8 8 9 9 Optional Accessories 10 Mounting Hardware Instructions 11 Installation Extender Kit Installation Non-Kit Standard Installation Non-Kit Daisychain Installation Extender/Repeater Kit Installation Non-Kit Rem
B130-101 B130-101A B130-101-WP-1 B130-101A-WP-1 B130-101S B130-111 B130-111A B130-101-U B132-002-1 B132-002A B132-004-1 B132-004A B132-100-1 B132-100A B132-100-WP-1 B132-100A-WP-1 B132-110 B132-110A Package Contents Local Unit (L), Remote Unit (R) or Both (B) 1 or 2 External Power Supplies (Input: 100240V, 50/60Hz, 0.5A Output: 5V, 2A) Mounting Hardware Wallplate Screws Screwdriver 3.5mm Male to DB9 Male Adapter Cable 3.5mm Male to DB9 Female Adapter Cable 1 ft. VGA Splitter Cable 1 ft.
Product Features All • • • • Support a maximum resolution of 1920 x 1440 @ 60Hz. All operating systems supported. Plug and play; no software or drivers required. HDCP compliant. B130-101 • Extends a VGA Video signal (1024 x 768 @ 60Hz) up to 1,000 ft. from the source. • Features an additional VGA port, allowing for the connection of a local monitor. • Includes mounting hardware that allows units to be wall-mounted, rackmounted or pole mounted.
Product Features continued B130-101A-WP-1 • Extends both a VGA Video (1024 x 768 @ 60Hz) and a Stereo audio signal up to 1,000 ft. from the source. • Includes a VGA + Audio splitter cable, which allows for the connection of a local monitor and speakers. • All wallplate units come with RJ45 jacks, allowing for easy connection via standard patch cables; no 110 punchdown connections required. • Features built-in equalization and gain controls to adjust the video image.
Product Features continued B130-111A • Kit comes with both local transmitter and remote/repeater units. • Locate multiple monitors/speakers at different points in a chain of up to 2,000 ft. by connecting an additional remote receiver unit (B132-100A or B132-100A-WP-1), or a remote/repeater unit (B132-110A). • Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing audio/video to up to 4 remote displays/speakers in a full chain.
Product Features continued B132-002-1 • Works with the B132-100-1 and B132-100-WP-1 remote units to extend a VGA Video signal (1024 x 768 @ 60Hz) up to 1,000 ft. from the source. • Able to transmit a single VGA Video signal to 2 monitors. • Includes mounting hardware that allows unit to be wall-mounted, rackmounted or pole mounted. B132-002A • Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA Video (1024 x 768 @ 60Hz) and a Stereo audio signal up to 1,000 ft. from the source.
Product Features continued B132-004A • Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA Video (1024 x 768 @ 60Hz) and a Stereo audio signal up to 1,000 ft. from the source. • Features additional VGA and 3.5mm ports, allowing for the connection of a local monitor and speakers. • Transmits a single VGA Video and Stereo audio signal to up to 5 sets (4 remote, 1 local) of monitors and speakers.
Product Features continued B132-110 • Both extends and expands your Tripp Lite VGA over Cat5 installation, allowing you to locate multiple monitors at different points in a chain of up to 2,000 ft.. • Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays in a full chain. • Extend a 1024 x 768 (60Hz) signal up to 1,000 ft. between the local transmitter and the first remote/repeater unit in the installation.
Optional Accessories • • • • • • • • • • • • • • • B132-004-RB 1U Rackmount Bracket N001-Series Cat5e Snagless Patch Cables N002-Series Cat5e Patch Cables N020-01K-GY Gray Cat5e Bulk Stranded Cable – 1,000 ft. N022-01K-GY Gray Cat5e Bulk 24Awg Solid Cable – 1,000 ft.
Mounting Hardware Instructions All of the non-wallplate VGA extender products come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The B132-004-1 and B132-004A can also be mounted to a Tripp Lite B132-004-RB 1U rackmount bracket. Up to 3 B132-004-1 or B132-004A local units can be connected to a B132-004-RB.
Installation Extender Kit Installation (B130-101, B130-101A, B130-101-WP-1, B130-101A-WP-1, B130-101S, B130-101-U) Remote Unit Local Unit Note: 1. The diagram above shows a B130-101A VGA + Audio Extender Kit installation. Installation will be the same for other extender kit models, with the exception of units featuring VGA + Audio, VGA + RS232 serial or VGA only. The B130-101-U gets power from the USB cable built-in to the local unit, and doesn’t require external supplies. 2.
Installation continued 1 Make sure that the VGA, Stereo Audio* and RS232 Serial* source is powered off. 2 (B130-101, B130-101A and B130-101S only) – Connect the VGA and 3 4 5 6 Stereo Audio* source to the INPUT port(s) on the local unit using a VGA and Stereo Audio* cable. (B130-101S only) – Connect the included 3.5mm Male to DB9 Female adapter cable to the 3.5mm INPUT port on the local unit, and then connect the computer to the adapter using a DB9 cable.
Installation continued 10 Connect a monitor and speakers* to the OUTPUT ports on the remote unit using a VGA and Stereo Audio* cable. 11 (B130-101S only) – Connect the included 3.5mm Male to DB9 Male 12 13 14 15 adapter cable to the 3.5mm OUTPUT port on the remote unit, and then connect the serial device to the adapter using a DB9 cable.
Installation continued Non-Kit Standard Installation B132-100A Source PC B132-004A B132-100A-WP-1 Note: 1. The diagram above shows a B132-004A VGA + Audio Extender/Splitter Kit installation. Installation will be the same for non-Audio models, except that an Audio source and speakers will not be connected. 2. Test to make sure the entire installation works properly before pulling cables through ceilings/walls. 3. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable must be used.
Installation continued 1 Make sure that the VGA and Stereo Audio* source is powered off. 2 Connect the VGA and Stereo Audio* source to the INPUT port(s) on the 3 4 5 6 7 8 9 10 11 12 13 local unit (B132-002-1, B132-002A, B132-004-1 or B132-004A) using a VGA and Stereo Audio* cable. (Optional – B132-004-1 and B132-004A only) – Connect a local monitor and speakers* to the LOCAL port(s) on the B132-004-1 or B132-004A local unit.
Installation continued Non-Kit Daisychain Installation (B132-004-1 and B132-004A only) Source PC Local PC and Speakers (Optional) B132-100A B132-100A-WP-1 B132-004A Note: 1. The diagram above shows a B132-004A VGA + Audio Extender/Splitter Kit daisychain installation. Installation will be the same for non-Audio models, except that an Audio source and speakers will not be connected. 2. Test to make sure the entire installation works properly before pulling cables through ceilings/walls. 3.
Installation continued 1 Make sure that the VGA and Stereo Audio* source is powered off. 2 Connect the VGA and Stereo Audio* source to the INPUT port(s) on the local unit (B132-004-1 or B132-004A) using a VGA and Stereo Audio* cable. 3 Using the included daisychain cable, connect the LOCAL port(s) on the B132-004-1 or B132-004A to the INPUT ports on a second level B132004-1 or B132-004A. Note: A standard VGA cable can be used to increase the distance between units with no more than 6 ft. between.
Installation continued Extender/Repeater Kit Installation (B130-101. B130-101A, B130-111 and B130-111A) Note: 1. An extender/repeater kit installation can start with a B130-101, B130-101A, B130111 or B130-111A. The only difference between these kits is the type of remote unit that comes with them. The B130-101 and B130-101A come with remote receiver units, and the B130-111 and B130-111A come with remote/repeater units. 2.
Installation continued 4. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables. For optimal image quality between 500 and 1,000 ft.
Installation continued If you are not connecting any additional remote/repeater units, proceed to step 12. 8 Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the first remote/ repeater unit to the RJ45 INPUT port on a second remote/repeater unit. Note: If starting with a B130-101 or B130-101A, a remote/repeater unit (B132-110 or B132-110A) must be added in between the local and remote units that come with the kit.
Installation continued Non-Kit Remote/Repeater Installation Note: 1. The diagram above shows a B132-004-1 installation with the maximum number of remote units connected. A B132-004A installation will be the same, except there will be audio connections. B132-002-1 and B132-002A local units come with 2 ports instead of 4, and do not feature additional ports for a local monitor and speakers.* 2. A 1024 x 768 (60Hz) signal can be extended up to 1,000 ft.
Installation continued 4. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables. For optimal image quality between 500 and 1,000 ft.
Installation continued 8 Using Cat5e/6 cable, connect the RJ45 OUTPUT port on the first remote/ repeater unit to the RJ45 INPUT port on a second remote/repeater unit. 9 On the remote/repeater unit you just added, connect a monitor and speakers* to the OUTPUT port(s) using a VGA Video and Stereo Audio* cable. 10 Connect the external power supply to the remote/repeater unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
Installation continued Non-Kit Daisychain Remote/Repeater Installation (B132-004A and B132-004-1 only) Note: 1. The diagram above shows a B132-004A installation with the maximum number of remote units connected. A B132-004 installation will be the same, except there will be no audio connections. B132-002-1 and B132-002A local units cannot be daisychained. 201105276 933064-EN.
Installation continued 2. A 1024 x 768 (60Hz) signal can be extended up to 1,000 ft. between the local transmitter and the first remote/repeater unit in the installation. Up to an additional 1,000 ft. can be placed in between the first remote/repeater unit and the last display in the installation, for a maximum extension distance of 2,000 ft. Up to 4 remote units (3 remote/repeaters and 1 receiver) can be connected together to transmit a signal to up to 4 points in a 2,000 ft. chain. 3.
Installation continued 7 Repeat step 6 for each additional local unit in the installation. 8 Using Cat5e/6 cable, connect an available RJ45 OUTPUT port on the local unit to the RJ45 INPUT port on the remote/repeater unit. (B132-110 or B132-110A) 9 Connect a monitor and speakers* to the OUTPUT port(s) on the remote/ repeater unit using a VGA Video and Stereo Audio* cable.
Warranty 1-Year Limited Warranty TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
