Owners manual

ManualsBrandsTripp Lite ManualsCables4 Port VGA SVGA Video Splitter per EA

User's Manual

Introduction

The Video Splitter is a signal booster and splitter that takes video input from a single source and directs it to

multiple video outputs for monitors using analog signals. It extends the distance a signal is sent to about 210 ft.

Features:

• One video input to multiple video outputs

• Transmission distance of up to 210 feet

• Suitable for SVGA, VGA, and Multisync monitors

• Daisy-chain multiple units to increase the number of outputs

• Supports 350MHz bandwidth

IMPORTANT NOTE: This unit is not designed for CGA, EGA or MONOCHROME type monitors or

any monitor using a digital video signal.

Specifications

Power Supply DC 9V, 1A (max)

Maximum Cable Length 210 feet

Signal Type VGA, SVGA, Multisync Monitor

Installation

Stand-Alone Installation:

1. Connect the PC's video output port to the Video Splitter's “Video In” port using an HDDB15 Male/Female

Monitor Extension Cable (Tripp Lite # P500-006, P510-006, P510-010 or P510-015).

2. Connect the Video Splitter's “Video Out” ports to the input of your monitors either by using the existing

cable on the monitor or by using an HDDB15 Male/Male Monitor Cable (Tripp Lite # P502-006, P512-006

or P512-010).

3. Connect the provided power supply to the Video Splitter and turn on the unit. Your Video Splitter is ready

to go.

WARNING!

Use ONLY the 9V DC adapter that is supplied with this unit.

Technical specifications are subject to change without notice.

Tripp Lite World Headquarters

1111 W. 35th Street,

Chicago, IL 60609 USA

(773) 869-1234, www.tripplite.com

WARRANTY

REGISTRATION

to win a FREE Tripp Lite product!

www.tripplite.com/warranty

Video Splitter

(4- & 2-Port)

Model #: B114-004-R, B114-002-R

NOTE: Follow these installation and operating procedures to

ensure correct performance and to prevent damage to this unit

or to its connected devices.

200504001 93-2446 Video Splitter Owners Manual.qxd 4/28/2005 10:32 AM Page 1

Summary of content (8 pages)

PAGE 1
200504001 93-2446 Video Splitter Owners Manual.qxd e Y nc NT ION a chaduct! A R AT for pro nty AR TR todayp Lite arra W IS ne rip m/w G -li T co RE on EE ite. er FR ppl st a gi in .tri e w w R o t ww 4/28/2005 10:32 AM Page 1 User's Manual Video Splitter (4- & 2-Port) Model #: B114-004-R, B114-002-R NOTE: Follow these installation and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices. Tripp Lite World Headquarters 1111 W.
PAGE 2
00504001 93-2446 Video Splitter Owners Manual.qxd Installation 4/28/2005 10:32 AM Page 2 (continued) Multiple Unit Installation: 1. Connect the “Video Out” port from the first Video Splitter to the “Video In” port of the next unit in the chain. Use a standard VGA HDDB15 Male/Female Cable (Tripp Lite # P500-006, P510-006, P510-010 or P510-015). 2. Connect the power supplies to the Video Splitters and turn the power switch on. 3. Repeat steps 1-2 to connect more Video Splitters to the chain.
PAGE 3
200504001 93-2446 Video Splitter Owners Manual.qxd 4/28/2005 10:32 AM Page 3 Manual de usuario Divisor de vídeo (4 y 2 puertos) Modelo #: B114-004-R, B114-002-R NOTA: Siga estos procedimientos de instalación y operación para garantizar el rendimiento correcto y evitar daños a esta unidad o a los dispositivos conectados. Tripp Lite Oficinas principales 1111 W. 35th Street, Chicago, IL 60609 USA (773) 869-1234, www.tripplite.
PAGE 4
200504001 93-2446 Video Splitter Owners Manual.qxd Instalación 4/28/2005 10:32 AM Page 4 (cont.) Instalación de varias unidades: 1. Conecte el puerto de “salida de vídeo” (Video out) desde el primer divisor de vídeo al puerto de “entrada de vídeo” (Video in) de la siguiente unidad en la cadena. Use un cable estándar VGA HDDB15 macho/hembra (Tripp Lite # P500-006, P510-006, P510-010 o P510-015). 2. Conecte el suministro de energía a los divisores de vídeo y prenda las unidades. 3.
PAGE 5
200504001 93-2446 Video Splitter Owners Manual.qxd 4/28/2005 10:32 AM Page 5 FCC Radio/TV interferencia Nota: Este equipo fue probado y se encontró que cumple con los límites para un dispositivo digital de clase B, conforme a la sección 15 de las reglas FCC. Estos límites son diseñados para proporcionar una protección razonable contra interferencia perjudicial cuando el equipo es usado en un ambiente comercial.
PAGE 6
200504001 93-2446 Video Splitter Owners Manual.qxd 4/28/2005 10:32 AM Page 6 Manuel de l'utilisateur Doubleur vidéo (4- et 2-Port) Modèles no. : B114-004-R, B114-002-R REMARQUE : suivez ces procédures d'installation et d'utilisation pour assurer un rendement adéquat et pour prévenir tout dommage à ce dispositif ou aux appareils qui y sont branchés. Siège social Tripp Lite international 1111 W. 35th Street, Chicago, IL 60609 USA (773) 869-1234, www.tripplite.
PAGE 7
200504001 93-2446 Video Splitter Owners Manual.qxd Installation 4/28/2005 10:32 AM Page 7 (suite) Installation avec plusieurs appareils : 1. Branchez le port “Video Out” du premier doubleur vidéo au port “Video In” du prochain appareil de la chaîne. Utilisez un câble VGA HDDB15 mâle/femelle (Tripp Lite no. P500-006, P510-006, P510-010 ou P510-015). 2. Branchez le bloc d'alimentation au doubleur vidéo et placez l'interrupteur à la position ON pour allumer l'appareil. 3.
PAGE 8
200504001 93-2446 Video Splitter Owners Manual.qxd 4/28/2005 Tripp Lite World Headquarters 1111 W. 35th Street, Chicago, IL 60609 USA (773) 869-1234, www.tripplite.