MODEL 3 SHOWN MODEL 1 MODEL 2 MODEL 3 Includes web upgrading information
The next generation of technology and testing The LVPro employs the latest technology to get you the highest quality testing for your low voltage projects at the best price. The TIA 586 tests, PASS/FAIL, wiremap, timing tests (delay, skew) and impedance measurement (ohms) are standard on all Low Voltage Pros. And if you need more, you can upgrade your tester via the web.
Table of Contents Introduction to the LVPro ............................................... 2 List of functions by Model 1, 2, 3 .................................. 3 Understanding the Buttons and Display ....................... 4 Test APPS sorted by Function ......................................... 5 Display Screen (LCD) by Model 1, 2, 3 ............................ 6 Preloaded APPS by Model 1, 2, 3 .................................... 7 How to Operate Tests .........................
INTRODUCTION Have you ever wanted a tester that did the whole low voltage job? A tester that has super accurate cable testing plus testing APPS for many of the low voltage devices that you work everyday? Devices such as switches, PoE, CCTV and Dolby speaker installations? If you are one of those people, then The Low Voltage Pro (LVPro) is the tester family for you. More and more cable installers are now doing "device" installations... installing IP phones, IP cameras, CCTV equipment.
Low Voltage Pro List of Functions by Model MODEL 1 APPS CABLE TESTING PACK CABLE Includes TIA586 cable diagram, Pass/Fail, timing (delay, skew) TEST and impedance (ohms). Models with the Length-RLQ Pack APP (2 and 3) have length in the wiremap. ID Locate multiple wall jacks for CAT5/6 and coax. Requires Remote kit(s) TONE CABLE DETECTION Place a tone on one end and detect it on the far end. Requires optional Remote Tone Probe. SPEAKER POPPER Locate speakers by audibly “popping” them.
PUSH BUTTONS ARROW / OK BUTTONS 1 USE ARROWS TO DIRECTIONAL PAD "D-PAD" FIND TEST 2 PRESS OK START TEST CABLE TYPE SELECTION TEST APP SELECTION LVPro SUPER SCREEN CABLE WIREMAP TEST RESULTS SELECT TEST SELECT CABLE TYPE HAMMERING LVPro IS WORKING PUSTH TO QUIT APP WALL JACK LOCATOR TONE LOCATOR MORE INFO (WHEN LIT) OTHER BUTTONS ON / OFF 3 PRESS EXIT STOPS TEST 60 DEGREE ANGLE (BEST VIEWING): The LVPro LCD is designed to be brightest at a 60 degree angle.
CABLE TESTING APPS CABLE TESTING PACK (ALL MODELS) Includes TIA586 cable diagram, Pass/Fail, timing (delay, skew) and impedance (ohms). Models with the Length-RLQ Pack APP (2 and 3) have length (see below). CABLE TEST 1 2 R LENGTH-RLQ PACK (MODEL 2 AND 3 ONLY) Get perfect length. Use built-in values or calibrate with your cable. Adds length readout to Cable Test APP (cable length, distance to open or short). Also includes RLQ (below).
DISPLAY SCREEN BY MODEL WEB UPGRADEABLE The Low Voltage Pro gives you a choice: Buy the model you wish now or upgrade it later (using the web). Below are the LCD display screens for Models 1, 2 and 3. Trick: While the LVPro is powering up, press the TONE and DETAILS (magnifying glass) buttons to see your display.
7 1 ID CABLETEST PACK WALL JACK SPEAKER 7.1 ID SPEAKER PORT BLINK TONE LOCATOR ALERT LEDS 2 2 PRELOA D ED A PPS ID CABLETEST PACK WALL JACK SPEAKER 7.1 ID SPEAKER PORT BLINK TONE LOCATOR ALERT LEDS LENGTH-RLQ PACK TEST 3 3 ID CABLETEST PACK WALL JACK SPEAKER 7.
OPERATION RJ11 TESTS COAX TESTS 2 WIRE TESTS CAT5/6 TESTS VOICE VIDEO SPKR DATA COAX RJ11 HQ 1 2 HQ CABLE TEST 1 CABLE TEST 2 ALARM HQ R 1 RJ45 2 HQ 1 2 CABLE TEST CABLE TEST R ID HD FD FEET METERS OHMSDELAYSKEWVDCVPP SUB CTR FL FR SL SR SBL SBR LOAD (ma) 12345678 S c PoE TONE PAIR PASS FAIL SAVE OPEN SHORT CROSS REV SPLIT CABLE SELECTION (LEFT / RIGHT ARROWS) DIRECTIONAL PAD "D-PAD" TEST APP SELECTION (UP / DOWN ARROWS) INTRODUCTION Soon you will appreciate the ease-of-
OPERATION TEST APPS for both Cable and Devices. There are APPS for both the testing cable and APPS for testing devices associated with those cable types.Your LVPro Model number (1,2,3) and possible prior upgrades determines which of the following APPS you have loaded on your tester. If there is an APP you do not have and think you would find useful, you can use the web to add it (see USING LVPRO MANAGER SOFTWARE (in this manual).
OPERATION Included with the Length-RLQ APP, Return Loss Quality tests for load mismatches that affect the wire’s power and data transfer capability. It is a powerful quality test that should be used if quality problems are suspected with the cable. The RLQ test works with DATA cables and VIDEO cables. ACCEPTABLE: Ratings of 1 and 2. 1. Connect cable to Main unit and green RLQ Remote. 2. Select and start Test APP (D-PAD button). Green RLQ 3. Hammering says it's active. EXIT returns to menu.
OPERATION RJ45/Clip Adapter disconnected). 2) Using the RJ45/Clips adapter, connect speaker wires to the LVPro's RJ45 port. RESULT: The icon that matches the speaker will light. Requires remote kit. Order: P/N LVProSpkrID Kit (8 pcs). Test Active RJ45/Clip Adapter Test Active ALARM BATTERY TEST Use: Test alarm system and other backup batteries by doing a loaded battery test. Better than a voltmeter test because this test places a 100ma load on the battery.
LVPro Manager Software WHAT DOES IT DO? LVPro Manager link together your PC and LVPro (use the included USB cable to connect the two). It performs 3 tasks: 1. Adds Test APPS to your LVPro: As an example, let's say you want to move from Model 1 to Model 2 or buy a single Test APP. For this task, LVPro Manager acts like a shopping cart. It lists the cost of the APPS and handles the downloading of the APPS to the LVPro. 2. Upgrades LVPro firmware.
LVPro Manager Software USING THE LVPro Manager Software: As an example, let's say you want to move from Model 1 to Model 2 (add the Length-RLQ Pack) or simply find out what is installed on your tester. After launching the software, the following screen appears: First, press button to connect to the tester.
LVPro Manager Software TOOLBAR MENUS Open a saved test file (.lvp file) Save a test file (.
LVPro Manager Software Add new Test APPS and see the Test APPS installed on your tester. THE TEST APP STORE: Many users enter the APP store to see what APPS are installed on their tester. If adding APPS, press the BUY button. An email is sent to Byte Brothers letting us know. We will then contact you and give you an encrypted code that upgrades your tester. LVPro Manager Software See video of LVPro Manager Software at www.bytebrothers.
MOBILE VIDEO TRAINING QR CODES Video Training Intro LVPro introduction TRAINING FOR TEST APPS ON MODEL 1 LVPro Cable Test LVPro Wall Jack ID LVPro Speaker ID LVPro Speaker Pop TRAINING FOR TEST APPS ADDED FOR MODEL 2 LVPro Length LVPro RLQ TRAINING FOR TEST APPS ADDED FOR MODEL 3 LVPro CCTV Vpp LVPro Network 16 Alarm battery test LVPro PoE
MOBILE VIDEO TRAINING QR CODES LVPro Basic Navigation LVPro Manager Software Tone Generator LVPro Port Blink TRAINING VIDEOS are the quickest and most complete way to learn the LVPro. The 3 minute movies make you an expert with each Test APP. Learning the Low Voltage Pro From the web: Go to www.bytebrothers.
CABLE TEST EXAMPLES CABLE TEST CABLE TESTING PACK (ALL MODELS) The Cable Testing Pack is standard on all LVPro Models. These following are examples of the TIA 568 test that the LVPro performs on Category cable. In addition to PASS/FAIL and wiremap that is shown here, there are also timing tests (delay, skew) and impedance measurement (ohms). Models with the Length-RLQ Pack APP (Models 2 and 3) add Length and the RLQ quality.
CABLE TEST EXAMPLES CABLE TEST TECHNOLOGY FOR PERFECT CABLE TESTING The LVPro employs the latest technology to get you the highest quality testing for your low voltage projects at the best price. The TIA 568 tests, PASS/FAIL, wiremap, timing tests (delay, skew) and impedance measurement (ohms) are standard on all Low Voltage Pros. And it you need more, you can upgrade your tester via the web.
GLOSSARY "OHMS" Cable impedance The high-frequency nature of 21st century CATV and data signaling requires cabling that preserves the integrity of the signal between transmitter and receiver. This requires a good impedance match along the transmission route. Standard Cat5, Cat5e and Cat6 data cables employ twisted pair transmission lines, with a specified 100-ohm characteristic impedance on each pair.
GLOSSARY "VOP" Velocity of Propagation (Models 2 and 3) All cables, no matter what type, have a VOP. It is usually listed on the cable's datasheet. Or, the LVPro's Length-RLQ APP can measure it in what we call VOP "CAL" mode. The best way to describe VOP is to relate it to "Propagation delay" ... the travel time for a signal applied at the transmit end of a transmission line or system to arrive at the receive end.
SPECIFICATIONS Cable Types Tested (All LVPro models) Shielded and unshielded twisted pair. All cable categories. Coax. All types. Telephone. Speaker and alarm wire. Cable Tests (all LVPro models) Opens, shorts, reversals, split pairs, wiremap, propagation delay, skew, ohms. Feet and meters selectable. Advanced Cable Tests (Models 2 and 3) Length and distance to fault. Adjustable and standard VOP settings for accurate length of all cables. RLQ. Return Loss Quality.
PART NUMBERS/CONTENTS Common parts standard with all LVP Pro Models (1, 2 or 3): Cable Tester with built-in Remote, RJ45/Alligator Clip adapters (2), CAT 6 patch cables (2), zippered, embroidered pouch and 9V battery. Includes LVPro Manager software and USB cable (6'). LVPro 1 Low Votage Pro Model 1 Includes 6 APPS. Upgradeable to Models 2 and 3 (factory or web). LVPro 2 Low Voltage Pro Model 2 Adds Length-RLQ Pack to bring total APPs to 7. Upgradeable to Model 3 (factory or web).
PINGING Appendix A. Ping and TCP/IP debugging tools Who should read this: If you spend time working with Ethernet and network devices, this section could be of help to you. Ethernet Software Level (TCP/IP): Once the LVPro has established that your cables and network devices are working at the hardware level, your next step is to checkout the software level of your network.
Appendix B. Color code for Category cable destination. This can help determine why a network is slow (or not functioning). Enter tracert /? at the prompt to display the options possible with this command. EXAMPLES OF USE: Determine how many routers between my system and the ISO that services Byte Brothers. Enter tracert followed by the name or IP address of the destination (enter www .bytebrothers.com). Netstat USE: Displays the current status of all listening TCP/IP ports.
© 2012 Byte Brothers, Inc. Patents pending WWW.BYTEBROTHERS.COM 7003 132nd Place SE, Newcastle, Wa 98059 USA +1 425.917.8380 FAX +1 425.917.8379 cs@bytebrothers.
