Data Sheet

CABLE TEST PACK
WALL JACK
SPEAKER
PORT BLINK
TONE LOCATOR
ALERT LEDS
SPEAKER 7.1
ID
ID
10/100/1000
PoE VOLTS
PHONE VOLTS
CCTV SIGNAL
BATTERY LOAD
PRINT RESULTS
LENGTH-RLQ PACK
3
2
1
CABLE TEST
+ 6 APPS
CABLE TEST
+ LENGTH-RLQ PAC K
+ 6 APPS
CABLE TEST
+ LENGTH-RLQ PAC K
+ 12 APPS
CABLE TEST PACK
WALL JACK
SPEAKER
PORT BLINK
TONE LOCATOR
ALERT LEDS
SPEAKER 7.1
ID
ID
LENGTH-RLQ PAC K
CABLE TEST PACK
WALL JACK
SPEAKER
PORT BLINK
TONE LOCATOR
ALERT LEDS
SPEAKER 7.1
ORDER
LVPRO 1
ORDER
LVPRO 2
ORDER
LVPRO 3
MODEL 3
SHOWN
SL
SBL
CTR
SUB
FRFL
SBR
SR
ALERT
1
2
CABLE TEST PACK (ALL TYPES)
WALL JACK MAPPERS AND SMART REMOTES*
SPEAKER POPPER
PORT BLINK CABLE DETECTION
TONE CABLE DETECTION *
ALERT LEDS (LINKS, VOLTS)
LENGTH-RLQ PACK
10/100/1000 DETECTION/DISPLAY
PoE / PAIRS
PHONE
CCTV / Vpp (peak to peak voltage)
LOADED BATTERY TEST
PRINT UP TO 250 REPORTS
SPKR 7.1 ID# MAPPER *
MODEL 1 TEST APPS
Cable diagram, Pass/Fail, Delay, Skew, Ohms
1% HQ Length included with LVPro 2 and 3.
Choose ID’ing only or test/ID in one pass.
RJ45 and coax. Requires Remote kit(s).
Locate speakers by audibly “popping” them.
Alligator clips included with all LVPRO Models.
Especially designed to properly map and
label A/V speaker wires. Requires remote kit.
Locate a cable connection to a switch port by
blinking the switch’s Link LED.
Place a tone on one end and detect it on the
far end. Requires remote tone probe.
Two LEDs quickly alert you to an active switch
connection or voltage on the line.
* See web for accessories
Get perfect length, all wire types. Use built-in VOP
values or calibrate with your cable. Adds length
readout to Cable Test App (cable length, distance
to open or short). Also includes RLQ (below).
Plug into any active port (computer, switch, VoIP,
access point) and display its capabilities.
Detect PoE voltage and display its amplitude and
location on the cable (midspan, endspan or both).
Detect central office telephone connections.
Display voltage and cable location (up to 4 phones).
CCTV systems require a minimum of 1Vpp to
DVR. Measure and display Vpp of video signal.
Test alarm system and other backup
batteries by doing a loaded battery test.
Store for later printing up to 250 tests (all
cable types). USB and software included.
c
2013 Byte Brothers, Inc.
R
Included with the Length-RLQ APP, Return
Loss Quality tests for load mismatches that
affect the wire’s power and data transfer capability.
ID
PATENTS PENDING
DESIGNED AND
ASSEMBLED IN THE USA
3 MODELS... WEB UPGRADEABLE
TESTS BOTH CABLES AND DEVICES
“Nails it
every time!”
PRINT
MODEL 3 ADDS THESE TEST APPs
CABLE
TEST
MODEL 2 ADDS THIS TEST APP
ACCESSORIES
COAX IDs
LVP-COAX
RJ45/COAX IDs
LVP-RJ45COAX
RJ45 IDs
LVP-RJ45
SPEAKER IDs
LVP-SPEAKER
TONE PROBE
LVP-P
SMART RJ45 IDs
TEST/ID ONE PASS
Cable and Device Testers
Cable and Device Testers
7003 132nd Place SE, Newcastle, WA 98059 USA
+1.425.917.8380
●
FAX [phone]
● [e-mail]