Instructions / Assembly

Triplett Line-Bug 4 Features
▲ Tests standard telephone jacks and LAN jacks for
connection to telephone system
▲ Protect your Expensive LAN Tester!!! -
checks LAN Lines (RJ-45) wired to 568 A/B
standard for damaging telephone line current
▲ Has both RJ-11 and RJ-45 style plugs
▲ 4 Tri-color (Red / Green / Amber) LEDs indicate
Current, Polarity, & Ringing / AC Voltage on
each line
▲ Tests Single Line, 2 Line, 3 Line, or 4 Line jacks
to USOC (telephone) standard
▲ RJ-45 test plug is selectable via front panel switch
for USOC (telephone) or 568 (LAN) connection
▲ Compact design - fits in shirt pocket
▲ Self powered - no batteries required
▲ Economical and Convenient
▲ One Year Limited Warranty
Instructions
RJ-11 Phone Lines:
Plug RJ-11 connector into jack
and observe LEDs. Switch
position does not effect test.
RJ-45 Phone Lines:
Set switch appropriately. (USOC for standard phone or 568 A/B
for LAN). Plug RJ-45 connector into jack and observe LEDs.
NOTES:
Do not plug RJ-11 into RJ-45 jacks. Damage may result.
Newer phone lines are often wired to 568 A/B instead of USOC.
LAN Lines
Some LAN lines have telephone current on previously unused
pairs. Pre-testing LAN lines with the Line-Bug 4 before testing
with a LAN tester may prevent damage to your LAN tester.
Plug RJ-45 connector into jack. Set switch to 568 A/B and
observe LEDs. Next, set switch to USOC and observe LEDs.
If any LED lights in either switch position, voltage is present.
DO NOT USE LAN TESTER AS DAMAGE MAY OCCUR!
Cat. No. 9615
Made in China
6<?>D@:EEENNW
PHONE LINE RESULTS
Green - Line OK
Red - Reversed Line
Amber - Ringing / AC Voltage
Not Lit - Dead Line
Triplett Corporation One Triplett Drive Bluffton, OH 45817
PHONE: 800-TRIPLETT FAX: [phone]
www.triplett.com
www.triplett.com
PATENT PENDING