Product Description

Tripleplus Ltd. | 5 Hamada St., High Tech Park, Yoqneam, 2069200, Israel | [phone] | [e-mail] | www.tripleplus.io
Triple+ CLM
™
Water Flood Sensor Installer Guide v3.0 P/N: CLM-
FDAMAP-1-00, CLM-FDEMEA-1-00, CLM-FDAMAP-2-00
♦ Welcome
Thank you for choosing Triple+ CLM™.
Triple+ CLM™ is the ultimate IoT cloud-based system for home safety. The system is managed via an App,
and is designed to prevent damage due to water leakage. Triple+ offers you a total peace of mind at home
or away.
♦ Please note
Please read these instructions carefully and follow the system's installation and commissioning steps.
Maintain this document in a safe place for future reference. Contact your authorized installer with any
questions.
Warning! This product was designed to prevent water leakage damages and should be used for this
purpose only.
♦ Triple+ CLM™ system
Triple+ CLM™ line of products includes innovative battery-operated devices which enables the automated
control of water valves. This is unified under the “Smart Home” umbrella. The Triple+ CLM™ HUB serves as
a Gateway that ensures a secured communication between the system devices, Triple+ cloud and App.
Triple+ CLM™ integrates easily into the Smart Home IoT ecosystem, providing a unique cloud-based secured
platform for Water Leak Management.
♦ Water Flood Sensor specification
Part No.
CLM-FDAMAP-1-00, CLM-FDEMEA-1-00, CLM-FDAMAP-2-00
Product description
The wireless and battery-operated Water Flood Sensor is installed
in places where high chance of water flooding may occur.
Whenever water is detected, an automatic command is sent to the
CLM™ HUB.
Dimensions
Body: 3.1 x 9.8 x 2.8 cm (1.2 x 3.8 x 1.1”)
Electrodes: 34X16X11mm (1.34X0.63X0.43”)
Cable length 30cm (1 ft.)
Weight
75 gr (2.64 Oz)
Power supply
2x AAA non-rechargeable batteries
Operation voltage
3V
Battery life span
Up to two years
Operating RF
868/915 MHz
Transmission range
Open space - up to 230 m (750 ft.)
In enclosed space - up to 120 m (390 ft.) Avoid installing in a
metal cabinet.
Working temperature
-20
0
C to +50
0
C (-4 to +122
0
F)
Certifications
FCC ID: 2AFOIFLD
IC: 20798-FLD
♦ Avoid installing the Water Flood Sensor in:
• Metal cabinets
• Dusty places
• Where the temperature exceeds -20°C and 50°C (-4 to +122
0
F).
• Where it can be hit or damaged.
• Outdoor, Exposed to rain and direct sunlight.
• High level of humidity.
♦ Water Flood Sensor description
1. LED indicator
2. Electrodes
3. Body
4. Wall mounting fitting
Flood
Sensor
installation
1. Open the battery housing cover by
sliding it down.
2. Remove the cover and expose the
battery housing to insert batteries.
3. Insert the batteries.
4. Close the battery housing cover.
5. Place the Flood Sensor at a height
where only the electrodes are in contact with water during a flood.
6. Mount the Sensor to the wall using the double-sided adhesive tape. The bottom part
at the electrodes may be fastened using 2 screws (not included).
7. After the installation, check that the LED indicator is clearly visible.
♦
Flood Sensor LED behaviour
• RED flashes every 10 seconds – water leak detection
• GREEN flashes every 30 seconds – OK
• BLUE flashes every 30 seconds – communication problems
• RED flashes every 30 seconds – low battery
♦
Flood Sensor Buzzer Behaviour
In case of a leak, the buzzer will sound every 10 seconds
♦
System installation
Triple+ CLM™ devices are installed and activated using the Triple+ CLM™ installer’s or End-User APP
available on AppStore and Google Play.
This Water Flood Sensor is designed for indoor use only and should be installed by an authorized plumber.
Please visit www.tripleplus.io/support for warranty, technical support, terms and conditions or
troubleshooting.
PW000108