OWNER’S MANUAL TRINITY 20" LITTER BOX ENCLOSURE END TABLE W/ DRAWER MODEL # TSKLWH-3403 / TSKLDG-3403 Important / Important / Importante FOR 3D ASSEMBLY INSTRUCTIONS Intelligent Instructions POUR DES DIRECTIVES D’ASSEMBLAGE 3D Directives intelligentes Instrucciones Inteligentes PARA INSTRUCCIONES DE ENSAMBLAJE EN 3D DOWNLOAD THE FREE APP | TÉLÉCHARGER L’APPLICATION GRATUITE | DESCARGUE LA APLICACIÓN GRATUITA
PARTS LIST Your TRINITY 20" Litter Box Enclosure End Table w/ Drawer should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online via our “Contact Us” section at www.trinityii.com. For assembly you will need a Phillips screwdriver.
ASSEMBLY INSTRUCTIONS STEP 1 Lay WOOD TOP (A) on a clean surface with screw holes facing up. Orient BACK FRAME (F) with feet facing up. Insert (2) DOWELS (N) into holes on BACK FRAME (F), connecting BACK FRAME (F) and WOOD TOP (A) as shown. F N A STEP 2 Orient RIGHT SIDE FRAME (C) with drawer holder on bottom. Connect RIGHT SIDE FRAME (C) with BACK FRAME (F) by inserting protruded part of RIGHT SIDE FRAME (C) into groove on BACK FRAME (F).
ASSEMBLY INSTRUCTIONS STEP 3 Insert LONG SCREWS (J) through WASHERS (L) and RIGHT SIDE FRAME (C) and hand tighten onto WOOD TOP (A). Insert SHORT SCREWS (I) through WASHERS (L) and RIGHT SIDE FRAME (C) and hand tighten onto BACK FRAME (F). C I J F L L A Only hand tighten STEP 4 Repeat STEP 2 and STEP 3 for LEFT SIDE FRAME (B). Note: LEFT SIDE FRAME (B) does NOT have TRINITY logo on it. I L B J L Only hand tighten © 2023 TRINITY - 800.985.
ASSEMBLY INSTRUCTIONS STEP 5 Screw SMALL SCREW (K) through DRAWER STOPPER (M) into screw hole on FRONT FRAME (D) as shown, tighten with a screwdriver. K M D STEP 6 Orient FRONT FRAME (D) with feet facing up and grooves facing inward. Insert DOWELS (N) into holes on FRONT FRAME (D). Connect FRONT FRAME (D) with WOOD TOP (A) via DOWELS (H) as shown. Make sure protruded parts of LEFT SIDE FRAME (B) and RIGHT SIDE FRAME (C) are inserted into grooves on FRONT FRAME (D).
ASSEMBLY INSTRUCTIONS STEP 7 Insert SHORT SCREWS (I) through WASHERS (L) and LEFT SIDE FRAME (B) and fully fasten with a Phillips screwdriver onto FRONT FRAME (D). Repeat for RIGHT SIDE FRAME (C). I L D Fully tighten all SCREWS from STEP 3 & STEP 4 with a Phillips screwdriver. Tighten all screws STEP 8 Lay STEP 7 assembly on its side and place BOTTOM FRAME (G) with protruded part facing outward as shown.
ASSEMBLY INSTRUCTIONS STEP 9 Users can choose to assemble FRONT DOOR (E) on left-hand side or right-hand side. Place FRONT DOOR (E) close to FRONT FRAME (D). Insert SMALL SCREWS (K) through hinge screw holes on FRONT DOOR (E), fully fasten with a Phillips screwdriver onto FRONT FRAME (D) as shown. Close FRONT DOOR (E). K E D STEP 10 Stand STEP 9 assembly upright and slide DRAWER (H) fully into assembly as shown. To remove drawer, push Drawer Stopper down underneath drawer to disengage drawer.
SERVICE PARTS LIST – TSKLWH-3403 (White) TRINITY Customer Service provides the following replacement parts: # Part Number 1) LNA-06-019-2024 Wood Top 9) LWH-16-009-1620 Bottom Frame 2) LWH-14-050-2124 Right Side Frame 10) LWH-14-049-2124 Left Side Frame 3) LWH-15-021-1924 Front Frame 11) ZSV-01-004-0635 Short Screw 4) ZSV-01-047-0410 Small Screw 12) ZSV-01-007-0616 Washer 5) LWH-21-023-1617 Drawer 13) ZSV-01-004-0658 Long Screw 6) LWH-15-021-1620 Front Door 14) LWH-15-022
SERVICE PARTS LIST – TSKLDG-3403 (Dark Gray) TRINITY Customer Service provides the following replacement parts: # Part Number 1) LNA-06-019-2024 2) # Part Number Description Wood Top 9) LDG-16-009-1620 Bottom Frame LDG-14-050-2124 Right Side Frame 10) LDG-14-049-2124 Left Side Frame 3) LDG-15-021-1924 Front Frame 11) ZSV-01-004-0635 Short Screw 4) ZSV-01-047-0410 Small Screw 12) ZSV-01-007-0616 Washer 5) LDG-21-023-1617 Drawer 13) ZSV-01-004-0658 Long Screw 6) LDG-15-021-
WARNINGS 1. Read and understand all instructions. Failure to follow all instructions may result in injury and/or damage. 2. The warnings, cautions, and instructions discussed in this manual cannot cover all possible conditions or situations that may occur. The user must always be aware of their environment and ensure that they use the product in a safe and responsible manner. 3. Do NOT modify the product in any way.
10 © 2023 TRINITY - 800.985.
PRODUCT REGISTRATION Thank you for purchasing a TRINITY 20" Litter Box Enclosure End Table w/ Drawer. In order to register your product and receive streamlined customer service, please fill out the following Product Registration Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of your original receipt with your submission.
12 © 2023 TRINITY - 800.985.
1 YEAR LIMITED WARRANTY TRINITY 20" Litter Box Enclosure End Table w/ Drawer Model # TSKLWH-3403 / TSKLDG-3403 Trinity International Industries (“Trinity”) warrants to the original consumer purchaser (“Purchaser”) of the TRINITY 20" Litter Box Enclosure End Table w/ Drawer (“Product”) that each Product shall be free from defects in workmanship and materials for a period of 1 year from the date of original purchase.
CONTACT US QUESTIONS? NEED PARTS? WE ARE HERE TO HELP! Please feel free to contact us. There are no questions too small, or any problems too big. We’re committed to providing our customers with the highest level of service. TRINITY Customer Service TEL: 800.985.5506 FAX: 310.347.4134 EMAIL: customerservice@trinityii.com Monday through Friday 5:00 AM – 5:00 PM (PST) www.trinityii.
