Juno T41/5 User Manual
Welcome Thank you for purchasing a Juno T41/5 Rugged Handheld Computer (Terminal)! This user manual will help you configure and use your device. Important information for using the user manual This user manual has been prepared to guide you through the configuration and operation of your device, which includes: 1. Initial configuration of the device 2. Operating basics 3. Navigating the operating system and software 4.
. > — describes a procedure or a navigation path. 5. Example: Tap > Settings > System > System Information > Wireless is equivalent to: (Start) icon or press the (Start) button 1. Tap the 2. Tap the Settings icon 3. Tap the System icon 4. Tap the System Information icon 5. On the System Information screen, slide left or right until the Wireless tab is displayed. You can also tap the < or > in the horizontal scroll bar to activate different tabs in the System Information screen.
• DO NOT OPERATE THE DEVICE WITHOUT THE CARD SLOT COVER PROPERLY INSTALLED. • IN MANY COUNTRIES YOU ARE REQUIRED BY LAW TO TURN OFF YOUR PHONE WHEN YOU FLY. THE MOST SECURE METHOD TO ACCOMPLISH THIS IS TO ENABLE AIRPLANE MODE. To do this, press and hold the POWER button for two seconds to display the Power Menu, then tap Enable Airplane mode. WARNING: TURNING OFF YOUR DEVICE DOES NOT TURN OFF THE PHONE; YOU MUST USE AIRPLANE MODE.
Disclaimers The manufacturer operates a policy of ongoing product development. The manufacturer reserves the right to make changes and improvements to any of the hardware and software products described in this document without prior notice. The screenshots and other presentations shown in this user manual may differ from the actual screens and presentations generated by the actual product. The manufacturer does not warrant that this document is error-free.
interfacing, parts, or supplies not supplied by manufacturer, (c) unauthorized modification, or misuse, (d) operation in conditions outside of the published environmental specifications for the product, or (e) physical damage due to external causes, including accident, abuse, misuse or problems with electrical power. Water damage caused by improper installation of the accessories and service parts is not covered by warranty. Removal of or tampering with the back case voids the limited warranty.
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Trimble's warranty, as set out in the user manual accompanying this statement, or as described in the warranty card accompanying the Product you purchased, is in addition to any mandatory rights and remedies that you may have under the Australian Consumer Law.
Contents Welcome ......................................................................................................... i Important information for using the user manual ..................................... i Document conventions............................................................................. i Terms ...................................................................................................... ii Important safety information...........................................................
Changing the power management settings .......................................... 25 Managing low battery ............................................................................ 25 Checking the phone memory ................................................................ 26 3.4 Working with files ............................................................................ 27 Copying files to your computer.............................................................. 27 Using File Explorer .............
6.3 Compass Calibration....................................................................... 45 6.4 Working with Bluetooth ................................................................... 46 6.5 Working with Wi-Fi .......................................................................... 47 Using the Summit Utilities ..................................................................... 51 Accessing the Summit Client Utility....................................................... 51 Main Window..........
Chapter 1 Getting Started 1.
GPS + Barcodescanner Model 1. Color Band The color band surrounding the screen is yellow or grey, and indicates IP65 or IP68, respectively. 2. Touchscreen The capacitive touchscreen enables handwriting, drawing and making selections with your finger. An optional T41/5 Capacitive Stylus, sold separately, is available.
The touchscreen is on a rugged Gorilla® Glass panel, and to prevent cosmetic scratches, a screen protector is recommended. Follow the instruction below to apply the Screen Protector. 3. Expanded feature location Combo of Imager and/or enhanced GPS. 4. Phone Receiver (Ear) When using the optional phone, place the receiver to your ear to hear the other participant(s) to the phone call. 5. Light Sensor The Light Sensor detects ambient light in your environment.
Color Pattern Condition Green Solid Fully charged Green Blinking Fully charged and OS notification n/a Battery not low, no OS notification Notes 7. POWER button When the device is on, press and release to suspend or resume the device. Press and hold for 2 seconds to open the Power Menu. Press and hold for 6 to 8 seconds to force the device to Reset. 8.
14. RIGHT button ( ) Press to activate the associated tile (if any) on the Tile bar. 15. Microphone Speak here when talking during a phone call. 16. LEFT button ( ) Press to activate the associated tile (if any) on the Tile bar. 17. button Press to access the Start screen. Press again to access the Home screen. 18. T41/5 Custom Port Connect the T41/5 Custom USB Client cable to this port to charge the device or connect to the device from a desktop or laptop computer.
1.2 Inserting a storage card and a SIM card To install a microSD storage card and a SIM card in your device, you need to remove the cover on the left side using the SD/SIM Card Access Tool included with the device accessories. NOTE: The device supports up to 32 GB SDHC microSD storage cards. SDXC cards are not supported. WARNING: Insert or remove a SIM card ONLY when the Phone module is completely off. WARNING: Only insert a SIM card on devices with Phone/WWAN capability. 1.
3. To remove a card, push the card to release from the slot. NOTE: Make sure you have saved any data in open programs before removing the storage card. WARNING: Only remove a SIM card when the device is in Shutdown mode, Absolute Power Off mode, Airplane mode or when the Phone module is off. 4. Replace the cover and then secure it with the screws.
1.3 Charging the battery IMPORTANT: Before using the Juno T41/5 for the first time, charge the device for at least 4 hours. The notification LED will turn green when fully charged. CAUTION: Avoid Extreme Heat • The battery is designed to stop operating at or above 149 °F (65 °C). If this status icon appears, the battery has overheated to 140 °F (60 °C) or more.
1. Connect the USB end of the T41/5 Custom USB Client cable to the AC charger. 2. Connect the custom end of the T41/5 Custom USB Client cable to the connector on the bottom face of your device.
3. Plug the AC charger into a wall outlet. If needed, attach a plug converter onto the AC charger. Tips for extending the battery life: See Chapter 3.3 for tips on extending battery life. 1.4 Turning your device on and choosing your language WARNING! BEFORE TURNING THE DEVICE ON, THE DEVICE MUST BE PLUGGED IN TO AN EXTERNAL POWER SOURCE. COMPLETE ALL STEPS IN 1.3 CHARGING THE BATTERY. 1. Once you begin to charge your device, the device turns on automatically.
2. The Welcome Wizard will lead you through the setup process. 3. Select your preferred language by using the + or - (shown as UP or DOWN on the Wizard) buttons on the left side of the device, then press the ACTION (shown as ENTER on the Wizard) button to choose the language (the touchscreen is not enabled in the Wizard). 4. Use the + button to highlight the box next to Yes, I want to use as the language on the device. a. Press the ACTION (ENTER) button to check the box. b.
your device.
Chapter 2 Operating Basics 2.1 Home screen The Home Screen is an easy way to launch common activities, such as using the phone, checking text messages or checking e-mail. You can view high-level information at a glance, with notifications for Live services, e-mail, voicemail, SMS/MMS and more. To navigate the Home screen, touch and slide your fingertip up or down on the screen; or drag the highlight bar to the desired item on the screen.
• calendar: Select this item to manage appointments. • favorites: Select this item to use Internet Explorer Mobile. You can change to the classic Windows Mobile Today screen by tapping > Settings > Home. 1. On the Appearance tab, change the theme to Classic Blue. 2. On the Items tab, uncheck Windows Default and select the items that you would like to appear on the Home screen.
Juno T41/5 User Manual 2.2 Start screen Press the button to access the Start screen where you can easily access the software installed on your device. Slide your fingertip up/down on the Start screen to browse more items and then access an item by tapping on the item. 2.3 Title bar In Windows Embedded Handheld, the title bar is located at the top of the screen and it is touchable. Tap anywhere on the title bar to reveal a list of vertical icon slots, representing different categories of icons.
Juno T41/5 User Manual Battery power is very low Wireless network connected Battery communication error Active connection, but not currently synchronizing Battery charging Inactive connection to computer or wireless network Battery level Synchronizing Battery out of temperature range WARNING Synchronizing error Instant messages received Pending alarm Speaker is on Phone is turned on and signal strength Speaker is off (or in mute position) Phone is turned off.
Juno T41/5 User Manual 2.4 Tile bar The Tile bar is located at the bottom of the screen and the information displayed there is more uniform than on earlier versions of Windows® Mobile operating systems. The Tile bar uses touchable tiles, and these tiles can be activated by pressing the corresponding buttons on front keypad of your device. Touchable tiles can be text strings or icons, depending on the screen, and they are at fixed positions on the Tile bar.
Juno T41/5 User Manual 2.6 Securing your device You can customize the level of security you want to have on your device by locking the keypad or the entire device. Lock the keypad The keypad lock turns off the keypad functionality. This is a helpful feature if, for example, your device is turned off and in your pocket, and you want to prevent accidental button presses from activating the device.
Juno T41/5 User Manual You will then see the following screen: To unlock the keypad, slide the lock symbol. Lock your device Locking your device prevents access to personal data. When you enable this feature, your device will automatically lock after a specified time of inactivity. A screen will be displayed requiring your device lock password before access is granted. To access the Lock menu, tap > Settings > Lock WARNING: BE CERTAIN TO REMEMBER THE PASSWORD.
Juno T41/5 User Manual 2.7 Configuring the Onscreen Keyboard The Soft Input Panel (also called S.I.P.) is a special on-screen keyboard for devices which do not have standard keyboards. The Juno T41/5 includes a custom S.I.P. application called Resco Keyboard Pro. To configure it, tap > Resco Keyboard Pro.
Juno T41/5 User Manual 2.9 Absolute Power Off mode The Juno T41/5 features a battery cut-off mode that enables the device to enter the absolute lowest power mode possible, even lower than the SHUTDOWN power state. In this mode, the draw on the battery is less than 20 uA. The primary purpose for this mode is to prolong the shelf life of the battery while the product is between the production factory and the customer.
Juno T41/5 User Manual Chapter 3 Managing and Caring for Your Device 3.1 Changing basic settings Personalizing the Home screen The Home screen is the starting place for most of the tasks you perform on your device and gives you access to all the features and software programs of your device. 1. Tap > Settings > Home > Appearance. 2. Select the available option from the list. 3. When done, tap OK. 4. To set a picture as the Home screen background: a. Select the Use this picture as the background option. b.
Juno T41/5 User Manual locale. 1. On the Home screen, tap > Settings > System > Regional Settings. 2. On the Regional Settings screen, select the Region tab and then select your preferred language from the list. 3. If desired, you can specify the locale, date and time style, as well as number and currency formatting options applicable to your region. 4. When done, tap OK. 3.
Juno T41/5 User Manual In Windows Mobile Device Center on your PC, tap File Management > Browse the contents of your device. In ActiveSync on your PC, tap Explore and double-tap My Windows Mobile-Based Device. 4. Navigate to your device’s Application Data > Sounds folder and then paste the audio file. 3.3 Managing battery power and data storage Battery Life The Lithium-ion polymer battery life is dependent upon the application and operating environment.
Juno T41/5 User Manual have some impact on battery life, but this is typically less significant than managing the hardware features. Changing the power management settings You can use Power Management to check the battery, and configure settings that prolong battery life. 1. Tap > Settings > Power. 2. On the Power screen, you can: Select the Battery tab to check the amount of battery life remaining. Select the Advanced tab to change the screen power settings. 3.
Juno T41/5 User Manual Checking the phone memory > Settings > System > Memory. 1. Tap 2. From the Main tab and Storage Card tab, check the available memory and the available storage on your device.
Juno T41/5 User Manual 3.4 Working with files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. Copying files to your computer 1. Connect your device to your PC. 2. Do one of the following, as appropriate to your PC: In Windows Mobile Device Center on your PC, tap File Management > Browse the contents of your device. In ActiveSync on your PC, tap Explore.
Juno T41/5 User Manual feature a Recycle Bin. Once a file is deleted, it cannot be recovered. 3.5 Adding and removing programs Before you purchase additional programs for your device, make sure that they are compatible with the Windows Embedded Handheld operating system. Also, before you launch the program installer, check first whether the installer can directly run on Windows Embedded Handheld or needs to be run on a Windows PC. Follow the setup instructions that came with your software.
Juno T41/5 User Manual 3.6 Using Task Manager Task Manager allows you to view or stop the programs currently running on your device. 1. Tap > Task Manager. 2. On the Task Manager screen, select a program on the list and then tap End Task. 3. To stop all running programs, tap Menu > End All Tasks. 4. Tap Menu to open a menu where you can change the view, sorting order, refresh the screen, and more. 3.7 Checking the Device System information Tap > Settings > System > System Information.
Juno T41/5 User Manual Mechanical shock The device is designed to resist damage for drops up to 4 ft (1.22 meters). However, you should protect the display from impact, pressure, or abrasive substances that can scratch it or crack it. The device should not be dropped unnecessarily. Environmental considerations The device’s rugged design. Here are some considerations that will help you get the most out of your device when working in very wet, hot or cold conditions.
Juno T41/5 User Manual 3.9 Safe Use of your Device Repair: Do not attempt to dismantle the device for repair. There are no user-serviceable parts inside. For service, use the contact details listed on the cover of this manual or contact your local dealer. Battery safety: Lithium-ion polymer batteries are classified by the U. S. Federal Government as non-hazardous waste and are safe for disposal in the normal municipal waste stream except where prohibited by local or regional regulations.
Juno T41/5 User Manual Ensure the input voltage on the power supply matches the voltage in your location. Ensure the power supply has prongs compatible with your outlets. The power supply is designed for indoor use only. Avoid using the power supply in wet areas. Unplug the power supply from power when not connected to the device. Do not create a short circuit in the power output connector.
Juno T41/5 User Manual Chapter 4 Connecting to a PC and Synchronizing Information You can take information from your computer wherever you go by synchronizing them to your device.
Juno T41/5 User Manual Windows Vista® come with Windows Mobile Device Center already installed. If Windows Mobile Device Center is not available on your Windows Vista®, you can download it from the Microsoft website. Go to http://www.microsoft.com and search for Windows Mobile Device Center. When you connect your device to your computer and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your device. To create a partnership: 1.
Juno T41/5 User Manual On Windows Mobile Device Center, you can do the following: Click Mobile Device Settings to change synchronization settings. When you click Pictures > Music and Video > new pictures/video clips are available for import, a wizard guides you to tag and transfer photos from your device to the Photo Gallery on your computer. Click Pictures > Music and Video > Add media to your device from Windows Media Player to synchronize music and video files using Windows Media® Player.
Juno T41/5 User Manual appear on your device after synchronization. 4.3 Synchronizing with your computer Connect your device to your PC to synchronize the information between your device and PC. While your device is connected, ActiveSync (or Windows Mobile Device Center on your PC) synchronizes every time you make a change on either the PC or your device. Starting and stopping synchronization You can manually synchronize either from your device or computer. From your device: 1.
Juno T41/5 User Manual NOTE: It is not possible to set ActiveSync Options if your device has not yet synchronized with your PC. 1. In ActiveSync on your device, tap Menu > Options. 2. Select the check box for any items you want to synchronize. If you cannot select a check box, you might have to clear the check box for the same information type elsewhere in the list. 3. To change synchronization settings for an information type, for instance, E-mail, select it and tap Settings. 4.
Juno T41/5 User Manual Chapter 5 Using the Phone NOTE: Not all Juno T41/5 models feature a GSM phone and WWAN feature. This section applies to the T41/5 X models only. Do not place a SIM card in T41/5 C or T41/5 M models. Before using the phone feature, purchase a GSM cellular voice or data plan from a GSM cellular service provider. You can use Phone to make phone calls, set up speed dials, keep track of calls, and send SMS messages just like the standard features of a mobile phone.
Juno T41/5 User Manual 3. Tap the Back icon( ) if you need to delete a number. 4. Tap Talk ( ) to begin the call. TIP: When you tap a key on the on-screen keypad, a list of names and numbers is displayed as your device searches Contacts, Call History, and Speed Dial to find a matching name or number. The next key you tap continues to narrow the search. When you see the name of the person you want to call, tap it and tap Talk ( ). Making a call from Contacts 1. > Contacts. 2.
Juno T41/5 User Manual 2. Select the number to call, and then tap . Making an international call Tap and hold the 0 (Zero) key on the keypad until “+” symbol appears. Enter the full phone number you want to dial, and tap Talk ( ). The full phone number includes the country code, area code (without the leading zero, if any), and phone number. Making an emergency call Enter the emergency number for your locale and then tap the Talk ( ). 5.
Juno T41/5 User Manual dial a number by tapping a single key. Using speed dial 1. Tap > Contacts. 2. Select a contact to view the contact details. 3. Select the desired phone number and tap Menu ( ) > Add to Speed Dial. 4. Specify the Name, Number, and Location assignment of the Speed Dial entry. 5. When done, tap OK. NOTE: The first speed dial location is generally reserved for your voicemail. Speed Dial uses the next available location by default.
Juno T41/5 User Manual 5.5 Working with CellStart Follow the instructions below to use CellStart to configure the cellular data connection. 1. Tap > CellStart. (You may need to tap OK to agree to the terms to open the program.) Under Available Settings, tap the [+] by your country to expand carriers. 2. Tap the [+] by the carrier you have signed up with and highlight Typical and tap New. (If using multiple configuration settings, you can tap on the primary setting and tap Default.) 3.
Juno T41/5 User Manual and the phone turned on to view the settings. Sounds: Tap to make changes. Phone Number: The SIM card phone number is displayed. Ring type, Ring tone and Keypad sounds: Choose the sounds you want for text messaging notifications. Security: A PIN can be set or changed to block unauthorized access to your phone connection. Services: Settings can be changed for Call Barring, Caller ID, Call Forwarding, Call Waiting, Fixed Dialing and Voicemail and Text Messages.
Juno T41/5 User Manual You can send a SMS (short message service) in much the same way as a typical mobile telephone. Each SMS text message can contain a maximum of 160 characters or less, depending on your service provider. To send a message from the Home screen, tap text > Compose. To send a message from the Start screen, tap Text > Menu > New. 5.9 Sending and receiving e-mail E-mail setup: Tap > E-mail > Setup E-mail. Follow instructions to set up the email service.
Juno T41/5 User Manual Chapter 6 Using Additional Hardware Features 6.1 Flashlight The dual LEDs for the camera flash can also be used as a flashlight. Tap > Flashlight to toggle the Flashlight on and off. 6.2 Assigning Buttons (hardware buttons) Tap > Settings > Personal > Buttons. Under Program Buttons, your favorite programs can be assigned to several of the device buttons. The list of assignable buttons is shown on the left hand side with the program that is assigned by default on the right.
Juno T41/5 User Manual 6.4 Working with Bluetooth If your device comes with built-in Bluetooth capability, you can wirelessly transmit data to and from your device by connecting to available Bluetooth enabled devices. To find out if you have Bluetooth installed in your device, > Settings > System > System Information > Wireless.
Juno T41/5 User Manual your device searches for Bluetooth devices. 3. Tap the name of the other Bluetooth device and tap Next. For enhanced security, use passcodes. Enter the same passcode on the other device. 4. Under Advanced, you can change the name of the other device and add additional services, if available. Tap Save. Creating a Bluetooth connection with a PC: 1. Ensure that your PC has connectivity software installed and has Bluetooth hardware. 2. Set up a partnership between your device and the PC.
Juno T41/5 User Manual Touch the Title bar, tap the Connectivity icon and tap Wireless Manager to open the Wireless Manager screen, and tap Wi-Fi. Tap > Settings > Connections > Wireless Manager and tap Wi-Fi. Once the Wi-Fi is turned on, it detects the wireless networks in the vicinity and gives you the option to connect to one. Turn Wi-Fi off when not in use to save battery power and possibly speed up other processes. 1. Wi-Fi by default is off.
Juno T41/5 User Manual To update Wi-Fi connection settings: 1. On the Wireless Manager screen, tap Menu > Wi-Fi Settings. 2. Tap the name of the network to update the settings for. 3. The Configure Wireless Network wizard appears. Update settings and tap Next as needed to progress through the wizard. 4. Tap Finish to close the wizard and save the settings.
Juno T41/5 User Manual the Allow data connections on device when connected to PC checkbox. Using ActiveSync via Wi-Fi Exchange ActiveSync, a component of Exchange Server, facilitates data synchronization between your device and an Exchange server. This synchronization can occur over a network connection, allowing you to update calendars, contacts, tasks and the Inbox on your device without directly connecting to a PC. The server must be running Exchange Server 2003 SP2 or later.
Juno T41/5 User Manual Using the Summit Utilities The Juno T41/5 software includes a Wi-Fi connection management and monitoring utility called the Summit Client Utility (SCU). SCU allows you to view all radio and security settings, and status; and enables you to troubleshoot connectivity issues. The SCU software is useful for establishing network connections on networks that require more complex settings than the Configure Wireless Network wizard provided in the Windows Embedded Handheld operating system.
Juno T41/5 User Manual To view a tab, tap the tab bar at the top of the screen, or slide your finger left or right to view the next tab. Main Window The Main window provides an overview of the current wireless network connection configuration (Active Profile), a snapshot of connection information, and additional information regarding SCU (About SCU). You can also import and export settings configurations, which is useful if you have multiple devices to configure to access your local networks.
Juno T41/5 User Manual Profile Window Profile settings are radio and security settings that are stored for each configuration profile. Tap New to create a new Profile and enter in the necessary connection settings for a Wi-Fi network access point. Scroll down to find the Commit button to save changes to the Profile. Status Window The Status window provides status information on the radio connection between the client device and the associated access point.
Juno T41/5 User Manual Global Window Global settings include radio and security settings that apply to all profiles and settings managed by SCU. 6.6 Working with the Camera If your device comes with the built-in camera, you can capture photos and videos. To find out if you have a camera installed in your device, tap > Pictures & Videos. If you see the Camera icon, your device has the camera feature. To capture pictures and videos, open the camera application: 1. Tap > Pictures & Videos. 2.
Juno T41/5 User Manual The camera application starts and soon displays a camera preview on the entire display screen. The camera will be in either in Portrait or Landscape mode as per the camera settings or according to the device orientation. The Title bar and Tile bar will not be visible. User Interface Once the Camera icon is tapped, the preview screen shows. Tap on the up ) to display the pop-up menu system and to access various arrow ( camera features and settings.
Juno T41/5 User Manual Capturing Images If preview not focused, a quick double-tap on the preview screen focuses the image (if focus is enabled in settings menu). Focus success is indicated by a green box displayed at center of the screen. The image can be captured after this by tapping on the Camera icon ( ) when the user interface is viewable on the image preview. You can also use the ACTION button to trigger the image capture. Captured images are saved with the file extension of .JPG.
Juno T41/5 User Manual Closing application To close the camera application, tap on the close (X) mark at the top right corner of the preview or press the OK button. Image Camera Application Features ) to display the pop-up menu system to access Tap on the up arrow ( various features and settings. The features and settings are described below. White Balance ( ) A tap on the White Balance icon, displays the following options.
Juno T41/5 User Manual is not affected by Digital Zoom. Brightness ( ) A tap on the Brightness icon enables adjustment of the Brightness offset. +3 [Maximum Brightness] +2 +1 0 [Normal Brightness] -1 -2 -3 [Minimum Brightness] Selection of any option applies that setting to camera preview and to images captured. Increase the Brightness if the subject is underexposed, or decrease the Brightness if the subject is overexposed.
Juno T41/5 User Manual Images will be stored with the selected quality and the file size of the image increases as quality increases. ) Camera Settings ( A tap on the Settings icon displays the sub menu which has Still Resolution, Storage Selection, Focus, Image Review, Image Tagging and Application Settings. These sub menu options are explained in further detail below.
Juno T41/5 User Manual SD Card: Save the images to the microSD card. This item is not selectable if no microSD card is installed. Focus ( ) Tap on the Focus icon to display the following options. Enable: This enables the Auto Focus feature, which is activated with double-tap on the image preview. Disable: This disables the Auto Focus feature. Image Review ( ) A tap on the Image Review icon will display the following options. 2 Seconds: The captured image is displayed for 2 seconds.
Juno T41/5 User Manual Off: Do not store date-time information. GPS Format: Deg/Min/Sec: Format in Degrees, Minutes, Seconds. Decimal Degree: Format in Degrees with decimal precision. Stamp Settings: EXIF: Store the location information as EXIF data. EXIF & Stamp: Store the location information as EXIF data and embedded on the visible image. Off: Do not store date-time information. APP Settings ( ) Tap on the APP Settings icon to display a sub menu with the options described below.
Juno T41/5 User Manual Image Delete and Switch to Camera in Image review mode When the Image Review mode is User Prompted, the camera application will display the capture image and show two icons. • DELETE ( ) Tap the delete icon to delete the image from the storage. • CAMERA ( ) Tap the camera icon to save the image and return to image preview mode. Video Camera Application Features Tap on the up arrow ( ) to display the pop-up menu system to access various features and settings.
Juno T41/5 User Manual SD Card: Save the videos to the microSD card. This item is not selectable if no microSD card is installed. • Video Review ( ) Tap the Video Review icon to display the following options: On: If selected, the video review mode is enabled. After video capturing is completed, video review window enables the user to review the capture video by playing it back. Also, DELETE and VIDEO icons are enabled in the review window.
Juno T41/5 User Manual 6.7 Working with GPS Tap > Settings > System > System Information > Wireless to see if your device has GPS installed. COM2 is the dedicated hardware port for the built-in GPS (COM1 is dedicated to the external 9-pin). The GPS is compatible with applications that accept the NMEA position information using a default baud rate of 38400. GPS settings: If you are using only one GPS-aware application, these settings do not need to be changed.
Juno T41/5 User Manual application. Failure to do so may leave the port open and hinder the next GPS operation. 6.8 SatViewer SatViewer provides information such as your current longitude, latitude, elevation, how many GPS satellites are visible and the quality of the computed coordinates. To open SatViewer, tap > SatViewer. To begin monitoring GPS satellites, tap the GPS tab and the Connect to GPS button.
Juno T41/5 User Manual 6.10 Barcode Scanning (For Scanner Version only) 6.10.1 How to Scan Barcode icon to launch the button you assigned Tap the ScanAgent for scanning barcode under “Bottons” dialogue box Option 2: Press the button you assigned for scanning barcode under “Bottons” dialogue box. How to make Button Assignment 1. On Desktop, tap Settings. 2. Tap Personal.
Juno T41/5 User Manual 3. Tap Buttons. 4. Tap the button you want to assign for barcode scanning, and then tap the drop-down list under “2. Assign a program”. 5. Tap “ScanAgent” and tap OK.
Juno T41/5 User Manual 6.10.2 Scanner Setup 1. On Desktop, tap Settings. 2. Tap Scanner. 3. The Scanner Setup dialogue box shows. Tap Scan Now to test the functionality of the built-in scanner.
Juno T41/5 User Manual For further configurations, please tap Edit Config. 4. Once Edit Config tapped, the screen below shows: a. By tapping Scan Codes, you can enter Supported Code screen.
Juno T41/5 User Manual b. By tapping Scan Parameter, you can enter scan parameter configuration screen. Tap a parameter and enter a value into Value box and click OK. c. By tapping Prefix/Sufix, you can enter prefix/sufix configuration screen.
Juno T41/5 User Manual d. By tapping Device Setting, you can enter reader parameter configuration screen. Tap a reader parameter and enter a value into Value box and click OK. e. By tapping Restore Defaults, you can restore the scanner to default configurations. Tap Yes to conform the message or No to cancel. Tap a reader parameter and enter a value into Value box and click OK.
Juno T41/5 User Manual 72
Juno T41/5 User Manual Appendix A: Regulatory Compliance U.S.A. - FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Juno T41/5 User Manual Exposure to Radio Frequency (RF) Signals Your device contains a radio transmitter and receiver. The radiated output power is far below the international radio frequency exposure limits. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by international standards bodies: • American National Standards Institute (ANSI) IEEE. C95.1-1992.
Juno T41/5 User Manual recommendations of Wireless Technology Research. Persons with pacemakers should use the ear opposite the pacemaker to minimize the potential for interference. Persons with pacemakers should exercise great caution if using a hands-free device such as a headset, as these persons may be at greater risk of the device not maintaining the recommended minimum six inches of separation from the pacemaker.
Juno T41/5 User Manual RoHS Statement This device conforms to RoHS (Reduction Of Hazardous Sub-stances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. CAUTION: RISK OF EXPLOSION IF BATTERY IS DISPOSED OF INCORRECTLY. DISPOSE OF THE DEVICE AND THE BATTERY ACCORDING TO INSTRUCTIONS FOR ELECTRONIC WASTE.
Juno T41/5 User Manual Conforms to the following Product Specifications: EN300 440-1 v1.6.1:2010 and EN300 440-2 v 1.4.1:2010 EN50360:2001/ EN62209-1:2006/EN62311:2008/ EN62209-2:2010 EN301489-1 v1.9.2:2011; -3 v1.4.1: 2002; -7 v1.3.1: 2005; -17 v2.1.1: 2009; -24 v1.5.1: 2010 EN55022/EN55024:2010 EN300328 v1.7.1: 2006 EN301908-1 v5.2.1: 2011 EN301511 v9.0.
Juno T41/5 User Manual Environmental Hazards The product complies with international RoHS regulations.
Juno T41/5 User Manual The meter may be affected by static electricity interference. please turn off the transmission function and wait a few minutes to start this function. Taiwan 低功率電波輻射性電機管理辦法 第十二條： 經型式認證合格之低功率射頻電機，非經許可，公司、商 號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功 能。 第十四條： 低功率射頻電機之使用不得影響飛航安全及干擾合法通 信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續 使用。低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻 射性電機設備之干擾。 SAR 標準值 2.0W/Kg，送測產品實測值為 0.
