User Manual

Trilliant Networks 100mw Radio Module
In
sta
ll
at
i
o
n In
st
r
uct
i
o
n
s
Januar
y
3
,
2007
Trilliant
Networks
The Trilliant Networks 100mw Radio Module is a 2.4GHz 802.15.4 data transceiver
module. The module contains a trance antenna or optional MMCX connector. Power is
supplied by a host module with a nominal operating voltage of 3.3 volts.
Specification of the radio includes:
IEEE Standard: 802.15.4
Power Output: 100 mw (+20 dBm)
Radio Sensitivity: -92 dBm minimum
RF Data Rate: 250kbps
Operating Frequency: 2.4-2.485 GHz
Bit Error Rate: 7*10-7 @92dBm
Network Topology: Mesh, Point to Point
Spread Spectrum: Direct Sequence
Modulation: O-QPSK
Radio Dimensions: 1.6” x 1.5”
Antenna Options: Directional trace antenna or MMCX external
Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting devices, this
transmitter should only be used or installed at locations where there is at least 20cm
separation distance between the antenna and all persons.

Summary of content (2 pages)