360 DSP Next Generation Certification Meter Wi-Fi Option Operation Manual This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. See Page 2 for complete details. This Class B digital apparatus complies with Canadian ICES-003. See Page 2 for complete details.
FCC Part 15 Compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents 1. General Information .............................................................................................................. 5 Helpful Website ..................................................................................................................... 5 Where to Get Technical Support ............................................................................................. 5 How this Manual is Organized ..................................................................
THIS PAGE LEFT INTENTIONALLY BLANK 360 DSP - Operation Manual, Wi-Fi Option 4
Chapter 1 1. General Information Helpful Website The following website contains general information which may be of interest to you: http://www.trilithic.com Trilithics website contains product specifications and information, tips, release information, marketing information, Frequently Asked Questions (FAQs), bulletins and other technical information. You can also check this website for product updates.
How this Manual is Organized Thank you for choosing the 360 DSP. This manual is provided with the 360 DSP to help the user become better acquainted with the device and to become productive faster. This manual is divided into the following sections: Chapter 1: General Information - provides an overview of the instrument and its basic features. Before using the instrument, it is recommended that the user read this section for an overview of features, basic commands and other important details.
Precautions A strong electromagnetic field may affect the measurement accuracy of the 360 DSP. Use only the battery charger supplied with the 360 DSP. Persuant to FCC 15.21 of the FCC rules, changes not expressly approved by Trilithic might cause harmful interference and void the FCC authorization to operate this product. The antenna used for this instrument is installed at the Trilithic factory or by Trilithic approved repair facilities.
What is the 360? Overview Advanced Home Certification Capabilities Simplify Installation and Troubleshooting Intuitive Color Touch Screen with Simple Pass/Fail Indicators Reduce Installer Entry Errors and Improves Decision Making Next-Generation Auto Test Apps Streamline Certification Convenient Multiple Standard Tests in a Single Auto Test App helps to Standardize Tech Processes & Procedures Powerful Troubleshooting Tools Improve the Overall Health of the System The Standardization Solu
Comprehensive Testing The 360 DSP makes Home Certification a breeze for technicians at all levels including installation, service, and contractor. Techs will appreciate the advantages of a quick and efficient device at their disposal that features a flexible and easy-to-operate interface that is inspired by modern smart devices.
Auto Test Apps The 360 DSP features next generation auto test applications that practically walk the technician through a job. By performing standardized measurement tests at various required locations on the job site using user set test plans, channel plans and limit sets, the meter very clearly indicates (using color and symbols) what areas still need attention, before the technician leaves the job site.
Testing Features Upstream Return Spectrum Analysis (4 to 110 MHz) Level Mode C/N Measurement QAM mode (MER/BER/Constellation) Complete Channel Plan Scan with Tilt Measurement DOCSIS 3.0 modem 8x4 (100/304 MBPS) RJ-45 (10/100MBPS) Wi-Fi b/g 2.
Equipment Supplied with the 360 DSP The 360 DSP comes with the following: 360 DSP Next Generation Certification Meter Built-in battery Protective Carrying Case with Shoulder Strap AC to DC Power Adapter & Battery Charger AC US Power Cable Operation manual on CD 360 DSP - Operation Manual, Wi-Fi Option 12
A Guided Tour of the 360 DSP Front View RF Input Connector Touch Screen LCD Soft Keys Back Button Arrow Buttons Power Button Enter Button Function Button 360 DSP - Operation Manual, Wi-Fi Option 13
Rear View RF Input Connector Optional Wi-Fi Antenna (Internal - 2 dB Gain) Identification Label (FCC ID & Notice) 360 DSP - Operation Manual, Wi-Fi Option 14
Top View RF Input Connector LED Flashlight Optional Wi-Fi Antenna (Internal - 2 dB Gain) Bottom View USB Port (Type A) DC Charge Port System Reset Button Ethernet Port 360 DSP - Operation Manual, Wi-Fi Option 15
THIS PAGE LEFT INTENTIONALLY BLANK 360 DSP - Operation Manual, Wi-Fi Option 16
Chapter 2 2. Wi-Fi Setup This chapter: Describes the setup of the Wi-Fi Option Wi-Fi Setup Procedure Perform the following steps to setup the optional Wi-Fi: 1. Power on the 360 DSP by pressing the Power button. 2. The Welcome screen will appear as shown in the image to the right. 3. Use the touchscreen to select the user profile that you would like to use. 4. By default, the Autotest navigation menu will appear as shown in the image to the right. 5.
8. The Meter Configuration screen will appear, use the touchscreen to select the Wi-Fi button as shown in the image to the right. 9. The Wi-Fi menu will appear, the following items can be adjusted within this menu: Prompt User - Use the keypad to select from either of the following options: When set to NO, this will cause the Network Manager to automatically login using the current SSID/ Password and prevents the user from adjusting the Wi-Fi settings.
Chapter 3 3. Wi-Fi Operation This chapter: Describes the how to use of the Wi-Fi Option Enable Wi-Fi Perform the following steps to use the optional Wi-Fi: 1. Power on the 360 DSP by pressing the Power button. 2. The Welcome screen will appear as shown in the image to the right. 3. Use the touchscreen to select the user profile that you would like to use. 4. By default, the Autotest navigation menu will appear as shown in the image to the right. 5.
6. The Network Manager window will appear, use the touchscreen to select the Wi-Fi button as shown in the image to the right. 7. If Prompt User is set to NO, the Wi-Fi will automatically try to connect to the default SSID if it is within range. 8. If Prompt User is set to YES, the Wi-Fi Settings window will appear as shown in the image to the right. Current Password - This field allows you to set the current Password to use for the selected SSID.
Disable Wi-Fi 1. When the Wi-Fi is enabled, select the Wi-Fi button again from the Network Manager window to disable the Wi-Fi. 2. The Continue window will be displayed as shown in the image to the right. Use the touchscreen to select Yes to disable to Wi-Fi or select Cancel to exit without disabling the WiFi. 2. When the Wi-Fi is disabled, the Network Manager window will display Unavailable as shown in the image to the right.
Wi-Fi Survey Mode Perform the following steps to access the Wi-Fi Survey mode. 1. Use the touchscreen to select the Utility softkey at the bottom of the screen. 2. The Utility navigation menu will apper, use the touchscreen to select the Wi-Fi icon as shown in the image to the right. 3. The Wi-Fi Survey screen will be displayed as shown in the image to the right. Use the Arrow buttons to highlight each of the networks displayed.
Chapter 4 4. Specifications Forward Frequency Tuning Range 50 - 1003 MHz Reverse Frequency Tuning Range 4 - 110 MHz Amplitude Measurement Range Analog: 40 dBmV to +50 dBmV Digital: -40 dBmV to +50 dBmV Return < -40 dBmV (Ground Block Test) IF Bandwidth 6 MHZ standard, 8 MHz optional Deep Interleave Compatibility Yes Carrier-to-Noise As per FCC Part 76.605.
9710 Park Davis Drive Indianapolis, IN 46235 (317) 895-3600 www.trilithic.