User Guide

Blink
6
Step 1: Plug in the Power Cable. Now, plug the
circular jack into the UV Sanitizer to Power ON.
Find either the USB Type-A port or USB-Type
C port behind the device.
Using YOUR OWN charging cable, plug it
into the corresponding port.
Plug your charging cable into your smartphone
and t it through the cutout.
The sanitization process takes 6 minutes.
But, you can keep your smartphone INSIDE
the device to CONTINUE charging.
Step 2: Put a smartphone inside and close the
lid. The sanitization process takes 6 minutes
and a Blue Indicator Light will BLINK during the
process.
Step 3: After 6 minutes, the Blue Indicator Light
will shut OFF. The sanitization process is DONE.
Now, simply remove the smartphone.
43
**The sanitization process will take Up to 6 minutes**
USING AS A SANITIZER
USING AS A SMARTPHONE CHARGER
Smartphone UV Sanitizer & Charge Box
TECHNICAL SPECS
Output 1 (Type-C PD3.0)
Output 2 (QC3.0)
USB+Type-C Total Output
UV Light Wavelength
Two UV Light Bulb, 360° UV Light disinfection
DC 5V/2.4A, 9V/2A, 12V/1.5A
DC 5V/3A, 9V/2A, 12V/1.5A
DC 5V/3.6A 18W(Max)
254nm

Summary of content (2 pages)