Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table Contents Introduction......................................................................................................... 4 Getting to know the Telephone Kit...................................................................... 4 Minimum System Requirements ....................................................................................... 4 Unpacking and Checking the Contents............................................................................. 4 Identifying Components................
Introduction Welcome to the VoIP Bluetooth Phone Kit manual. In this manual, you will learn how to use this Phone Kit to do all popular Skype standard functions, such as Contacts, History, SkypeOut, SkypeIn, Conference Call etc. This Phone kit enables you to make and receive Skype calls anywhere, without being in front of the PC. With a long life rechargeable Lithium battery, this Phone kit can sustain up to 6 hours talking time, so you don’t need to speak in rush every time.
Identifying Components TBW-104UB TVP-SP1B Front View TVP-SP1B
Back View Side View Getting Started Setting up the telephone kit 1. Place the included 700 mAh Li-on battery into the TVP-SP1B’s battery compartment 2. Connect USB cable to charge battery pack (please let the battery charge for a full 6 hours before using the phone for the first time) Software Installation 1. Turn on your PC 2. Please insert the Utility CD into CD-ROM drive, and then follow the instruction below to install Bluetooth software.
1. Click “Install Driver/Utility” to start 2. Click “Next” to continue 3. Please Click “Next”. 4. Please check “Yes, I do.” to launch utility when Windows startup. 5. Please Click “Next”. 6.
7. Please Click “Finish” to complete TVP-SP1B installation. 8. The installation will continue with Bluetooth adapter installation. Click “Yes” to install Bluetooth driver now. 9. Select language for installation 10. Installing 11. Please Click “Next” 12. Please check “I accept the terms in the license agreement” and then click “Next”.
13. Please Click “Install” to start installation. 14. Please choose “I accept” and then click “OK” 15. Installation will ask you plug Bluetooth Device into USB port, please plug TBW-104UB 16. Windows will continue installating into USB port then click “OK” to continue automatically 17. Click “Finish” to complete installation. 18. Please click “Yes” to restart your computer.
19. After the Computer is rebooted, Double click on the Bluetooth VoIP Phone icon and Click “Search” 21. Setup Utility is searching for Bluetooth Phones 20. Prepare for pairing. Please turn on CleraSky Bluetooth Phone 22. Select your Bluetooth Phone. (Please check the MAC address to select the right one. Please remove the battery to find MAC address label) 23. Please click “OK” to finish bluetooth device pairing. 24. Please Click “OK” to finish pairing process.
25. Please Click “Yes” to launch Bluetooth Phone Ustility 26. Please Choose “Allow this program to use Skype” and then click “OK. Appliactions Installed After you finish above installations, “Bluetooth” and “TRENDnet TVP-SP1B” items will be added to Windows Start Menu Programs group. Bluetooth The Bluetooth icon in windows system tray will indicate Bluetooth status by changing appearance. y Blue with Red: services are disabled. y Blue with White: services are enabled.
2. Bluetooth Settings: This program enables you to configure settings when you connect to a Bluetooth wireless technology device for the first time. For details, please refer to Bluetooth->User’s Guide. 3. Remote Cameras When you connect to a Bluetooth wireless technology-compatible digital camera, you ca operate it from the PC side and send captured images to the PC. 4. User’s Guide: This Bluetooth Utilities User Guide help you understand Bluetooth settings and trouble shootings. 5.
TRENDnet TVP-SP1B Phone Utility Phone Utility icon ( ) in system tray can display phone utility version and has one “Exit” function by right-clicking to quit this utility. Contents of the “TRENDnet TVP-SP1B” Utility 1. BT Phone Setting Utility: This utility help you pair Clearsky Bluetooth Phone with USB bluetooth adapter. 2. TVP-SP1B Utility: This is the main program which enables you doing skype functions from this Bluetooth phone. 3. Uninstall: Remove the TVP-SP1B phone utility from your computer.
Exploring the Telephone kit Menu Icons shown on the Handset Icon Meaning Icon Meaning A: Mode Homepage Contacts Ringing Configuration Configuration´Status Configuration´History Call with contacts B: Volume Volume 0 n=1~9 C: My Status Online Away Not Available Do Not Disturb SkypeMe Offline Invisible D: Battery Status Battery Full (The black area reduces as the battery runs low) Battery Empty Charging Battery Full (while charging) E: Contact’s Status Online Away Not Available Do Not
Function Keys: Sync Contacts Configuration Cancel, Back Off-hook, Make a call, Answer a call, Redial Up/Down Power ON/OFF, On-hook (hand-up) End a call, Back to Home Configurations Press to enter configuration mode Function in configurations Functions Descriptions History´Missed Display Missed call lists History ´Incoming Display Incoming call lists History ´Outgoing Display Outgoing call lists Status Change my status.
Guide to Basic Functions How to call skype contact? 1. Press 3 sec. ´Wait until phone shows “Clearsky on”´press to sync contact lists with PC skype 2. Use List button to scroll up/down the contact lists 3. Press to start a call. 4. Press to disconnect this call How to call an ordinary phone number (skype out)? 1. Enter “+”+phone number you want to call. (Press 2. Press to delete an incorrect digit) to start a call. How to answer a call? 1. Press to answer any incoming call.
4. Choose “P2P CALL” to hold 1st call and talk to 2nd contact. B. invite contacts and conference them together 1. Press to go to the contact list menu. 2. Press “*” to mark the contact you want to include in this conference call. (Conference participants (max 4+host) 3. Press to start this conference call How to redial outgoing calls? 1. Press to show outgoing call lists. 2. Select the contact (from the outgoing call list) you want to dial to make a call. 3.
Appendix Toshiba Bluetooth Utility Contents Bluetooth Functions Toshiba Bluetooth stack supports the following Bluetooth functions (profiles) Term Definition DUN Dial-Up Networking Enables you to establish a dial-up BluetoothTM wireless technology connection to the Internet or other networks with a wireless modem station, mobile telephone, or similar device.
A2DP Advanced Audio Distribution Profile Allows audio data to be exchanged between wireless headsets and other audio devices, as well as allowing high-quality music playback. Audio/Video Remote Control Profile AVRCP A/V remote control functions such as play and stop. The BluetoothTM Utility supports remote control operation. GAVDP HSP Generic Audio/Video Distribution Profile Basic profile used to support A2DP, AVRCP and other protocols. Head Set Profile Profile used for headsets.
2. Please Click “New Connection” to add new Bluetooth device. 3. Please choose “Express Mode” 4. Searching for Bluetooth devices 5. Select the device name from [Device List] and click on the [Next] button.
6. Please Click “Next” 7. Searching remote devices 8. When a service has been detected, a 9. The icons of the registered devices will window prompting you to enter the Bluetooth appear and the devices will be ready to use. passkey (PIN code) may appear. Please enter the passkey and click on the [OK] button. Please refer to your device instruction manual for information on which passkey to use.
Specifications RF Standard Class 1 Bluetooth v2.0 with EDR, backward compatible with Bluetooth v1.1 & v1.2 RF Frequency 2.4~2.4835 GHz, ISM band Spread Spectrum Frequency Hopping and Adaptive Frequency Hopping RF Output Power Up to 17 dBm Display 96 x 64 pixel, graphical type STN LCD with back light Interfaces One mini-USB connector for charging from computer USB port or external power adapter One earphone jack at 2.
Troubleshooting Problem: Press “Power on” button, but nothing happen, no display Solution: 1. Make sure the included rechargeable battery is fitted in the handset correctly. 2. Please press “Power on” button for about 3 sec. until you see an icons. Problem: Pop up a Bluetooth Security window Solution: 1. Bluetooth PIN should be self-assigned when pairing with Bluetooth phone. If this window pop up, please input default Bluetooth PIN: “0000”.
Problem: PC music plays in Bluetooth phone Solution: When you finish installation, system default audio device will be set to Bluetooth wave. If you want to change back to PC original default audio device, please go to SettingsÆControl PanelÆSounds and Audio DevicesÆAudio to choose default device. Problem: Why can I just invite one contact to join my current call? Solution: If you need to hold a conference call with more than 2 contacts, please choose contacts first and then make a conference call.
Limited Warranty TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDWARE ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF