Using a PoE switch Le . «Connect the TV-IP344P| / TV-IP345P! to your network using an existing compliant PoE switch or Injector. «For outdoor installation, please configure weather seal (included) per the diagram below, you will have to terminate the JR-45 connector after the ‘weather seal has been applied.
2, Hardware Installation and Configuration 1. Do not Install or mount the IP camera until after you complete the installation steps below. Temporarily place the IP camera next to your computer. 2. Download the utility at rennet communicability 3. Extract the file, install and run the camera utility.
4, Run the utility and find the Inactive camera under the security column. To activate the devices, dick the sack bex In the left column and enter a new password on the right side. 5. Once the device is activated, Double click on the IP address to open the web browser management Interface. Note: Interment Explorer or Google Chrome web browser needed for installation Interface.
6. Now you can access the camera's configuration page for live view and additional settings. For moral details, pleas refer to the User's Guide from our website. 7. Scan the QR code below to download a free mobile app to view the camera from your [0S or Android device. wide ice Download Link User's Guide Camera Utility trendsetter communicability Trendsetting Evo www trend net.
Mounting the camera 1 1. Place the provided template label on the wall or selling. For TVIP3M4P For TV-PH4H 2. Drill holes at each marked position on the template. Make sure the drill bit matches the size of the holes on the template. 3. Remove the dome cover using the provided Tor security Allen key.
‘over them. Then uss the provided screws to secure the camera to the 4. Insert the screw anchors Info the holes, and align the mounting base mounting surface.
‘When finished, attach the mods cover back on the dome using the : 4B. (Dome) Manually adjust your camera fo the desired viewing position. z Tory security Allen key.