TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Table of Contents Contents Product Overview.................................................................................... 1 Package Contents .............................................................................................................1 Features............................................................................................................................1 Product Hardware Features ......................................................................
Limited Warranty TRENDnet User’s Guide Product Overview Features TRENDnet’s Indoor / Outdoor 4 MP Varifocal PoE IR Network Camera, model TV‐IP344PI, provides powerful 4 MP HD night vision at 30 fps in complete darkness for up to 30m (100ft.). This IP66 weather rated camera features auto‐focus / optical zoom which provides installation flexibility and time savings. Use the included pro‐grade software to manage up to 32 TRENDnet cameras or download the free iOS® or Android™ mobile app.
Limited Warranty TRENDnet User’s Guide Audio Support Product Hardware Features Audio in and out ports for third party microphone and speaker (sold separately) Power Port Camera Overview Save installation costs with Power over Ethernet (IEEE 802.
Limited Warranty TRENDnet User’s Guide Camera Connectors Installation Hardware Installation Viewing Angle Choose the location where has good angle to shoot the image you expect to see. The motion detection area should also be considered when installing the camera. Bracket Installation Turn and lock the bracket into the mounting hole of IP camera. Use screws to fix the bracket to ceiling or wall, and turn the knob tightly to fix the angle of camera.
Limited Warranty TRENDnet User’s Guide Waterproofing Camera Installation The camera is designed featuring waterproof. However, you need to protect the cable connectors from water soaking. For example, you can tape the junction points of the connectors while you connect the cables or purchase a weatherproof cable/power cord protector. 1. Insert the Installation CD‐ROM into your computer’s CD‐ROM drive to initiate the Auto‐Run program. Click the Install Camera. 2.
Limited Warranty TRENDnet User’s Guide 3. Plug in and connect the power adapter to the camera. If you are using the PoE to supply power to the camera, please skip to the next step. Click Next when you are done. 5. The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC ID. Click Next. 4. Wait while camera is searching. 6.
Limited Warranty TRENDnet User’s Guide 7. 8. If you select "Fixed IP", fill out the IP address, subnet mask, default gateway, DNS server. Please ensure that the IP address of the camera and the computer must within the same network. Click Next. Type in the Password. The default password is “admin”. You must change the default password of the camera. Enter the default password: admin and enter the new password. The password must be between 8 and 32 characters.
Limited Warranty TRENDnet User’s Guide Configuration After you login into the live screen of the camera, the main page will appear as below: Viewing Camera Basic Function Open the Web browser on your computer (example showed in this User’s Guide is based on the Internet Explorer). In the Address bar, type the IP address you got from "Camera Installation" chapter or found by IP Installer, and then press [Enter].
TRENDnet User’s Guide Limited Warranty Speaker/Microphone: Click the "Mic" to speak out through the camera. Click the “Speaker” to receive the on‐side sound and voice from the camera. Online Visitor: It shows how many people connect to this IP camera. Relay On: Click the Relay out "ON" to trigger the relay output for testing. click "Off" to stop triggering. To switch between these two types of relay out, please refer to Event Configuration >> GPIO Setting session for detail.
Limited Warranty TRENDnet User’s Guide SYSTEM Configuring the Camera Setting To configure the camera, click on the live screen. The Web Configuration contains the settings that are required for the camera in the left menu bar, including System, Network, Audio/Video Setting, Event Configuration and Logout. To return to the live screen, please click the © Copyright 2017 TRENDnet. All Rights Reserved. button.
Limited Warranty TRENDnet User’s Guide System >> System Information >> Server Information System >> System Information >> Time Setting MAC Address: It indicates the IP Camera’s MAC address. Server Time: It shows current IP camera server time. Server Name: The Camera name. Date Format: Select the date display format. LED Indicator: Turn the LED light on or off by click the ON/OFF button. Time Zone: Select your time zone. It affect server time when you use "NTP" time.
Limited Warranty TRENDnet User’s Guide Direct Video Stream Authentication: System >> Tools To stream the video directly without going through the configuration page, you can access it via Internet. Stream 1 Video: http://camera_ip_address:port/stream1view.htm Stream 1 Video: http://camera_ip_address:port/stream2 view.htm Enable Password Protection: - Yes: User needs to enter user name and password to stream the camera. - No: User can stream the camera without entering the username and password.
Limited Warranty TRENDnet User’s Guide NETWORK Network >> Network Setting >> IPv6 Setting IPv6 is a newer numbering system that provides a much larger address pool than IPv4, which accounts for most of today’s Internet traffic. You can manually enter IPv6 address , enable DHCPv6 to get IPv6 address automatically. Manually setup the IPv6 address: You can set up IPv6 manually by enter IP Address, Gateway, and DNS.
Limited Warranty TRENDnet User’s Guide Network >> Network Setting >> Web Authentication The camera supports two levels of authentication, Basic and Digest. The Basic option having the username and password transmitted as plain text. The digest option encrypted username and password during data transmission. The default authentication is set to Digest. - The router is with some problems. Please reboot it: The camera cannot detect the router. Please check your router.
Limited Warranty TRENDnet User’s Guide Network >> Network Setting >> Multicast Setting (Based on the RTSP Server) Security: Select "Disable", then the username and password are not required when accessing the camera via ONVIF. Select "Enable", then username and password are necessary. RTSP Keepalive: When the function is enabled, the camera checks once in a while if the user who links to the camera via ONVIF still keeps connecting.
Limited Warranty TRENDnet User’s Guide Network >> Advanced >> HTTPS When the users access cameras via Https protocol, the transmitted information will be encrypted so that the security level is arisen. You can select the connection type. Http: user can access the camera via Http path. Https: user can access the camera via Https path but cannot via Http path. Http & Https: Both the Http and Https path can be used to access the camera.
Limited Warranty TRENDnet User’s Guide 5. To use Https to access camera, open your browser, and key in "https://(IP address)/" in the address bar. Now your data will be transmitted via encrypted communications, and the browser will check your certificate status. If it shows you a warning message. The warning message meant that the certificate is self‐signed or signed by distrusted institution. Click Continue to this website to view the view the camera. 4.
Limited Warranty TRENDnet User’s Guide Click the box to enable SNMPv1 or SNMPv2c protocol, and specify the community name for write (read and write) and read (read‐only). The user who use read community name to access the IP camera cannot modify any data of the camera. The community name can be any English characters and numbers, and must be shorter than 31 bits. SNMPv3: name can be any English characters and numbers, and must be shorter than 31 letters. The password must be 8~64 letters in length.
Limited Warranty TRENDnet User’s Guide Network >> Advanced >> IP Address Filter Network >> Advanced >> QoS/DSCP DSCP specifies a simple mechanism for classifying and managing network traffic and provide QoS on IP networks. DSCP is a 6‐bit in the IP header for packet classification purpose. The number 0~63 for Live Stream, Event / Alarm, and Management represent the ratio that the bandwidth is divided.
Limited Warranty TRENDnet User’s Guide Network >> Advanced >> IEEE 802.1x Network >> PPPoE & DDNS IEEE 802.1x is an IEEE standard for port‐based Network Access Control. It provides an authentication mechanism to device wishing to attach to a LAN or WLAN. To use this function, you need a device to build IEEE 802.1x LAN at first. The EAPOL protocol support service identification and optional point to point encryption over the local LAN segment.
Limited Warranty TRENDnet User’s Guide PPPoE DDNS Status: Select “Enabled” to use PPPoE. Type in the username and password for the ADSL connection. Send mail after dialed: When successfully connecting to the internet, it sends a mail to a specific mail account. As for the mail account setting, please refer to Server setting page. - Updating: Information update - Idle: Stop service - DDNS registration successful, can now log by http://.no‐cp.com: Register successfully.
Limited Warranty TRENDnet User’s Guide Network >> Event Server The settings of Email, FTP and SAMBA are used when the event occurs, schedule snapshot executes, or the alarm input is triggered. Select the item to display the detailed configuration options. You can configure either one or all of them. © Copyright 2017 TRENDnet. All Rights Reserved.
Limited Warranty TRENDnet User’s Guide - Secure Connection: If the mail server requires an encrypted connection, you should select the SSL option. TTLS is an extension to plain text communication protocols. It offers a way to upgrade a plain text connection to an encrypted (TLS or SSL) connection. Click Apply to save the setting, then use Test button to test the server connection. A message box will tell you “OK!” if it works, and a test e‐mail will be sent to receiver’s mail address.
Limited Warranty TRENDnet User’s Guide AUDIO/VIDEO SETTING Audio/Video Setting >> Image Setting © Copyright 2017 TRENDnet. All Rights Reserved. Privacy Mask: For the security and privacy purpose, there are three areas can be setup for privacy mask. Click Area button first and drag an area on the above image, and remember to save your setting. The masked area will not show on both the live view and recording.
Limited Warranty TRENDnet User’s Guide Brightness, Contrast, Hue, Saturation, Sharpness can be adjusted here. AGC: Automatic gain control. The sensitivity of camera can be adjusted with the environmental light. Enable this function and the brighter image can be got under dim light, but the level of noise may also increase. Shutter Time: Choose as the location of your camera or fixed shutter time. The shorter the shutter time is, the less light the camera receives and the image becomes darker.
Limited Warranty TRENDnet User’s Guide Audio/Video Setting >> Video Setting Basic Mode of Streaming 1 or Streaming 2: Video Settings Select Input Resolution and corresponding Video System (digital signal). © Copyright 2017 TRENDnet. All Rights Reserved. - Resolution: 2688x1520, 1920x1080, 1280x720 , 640x480, 640x360, or 320x240 - Quality: The higher the quality is, the bigger the file size is. It might affect Internet transmitting speed if the file gets too large.
Limited Warranty TRENDnet User’s Guide - RTSP Path: Set the RTSP output connecting route. You can use the RTSP address displaying beside the column to access this IP camera. - Video Format: H.264 or M‐JPEG - RTSP Path: RTSP output connecting route. You can use the RTSP address displaying beside the column to access this IP camera. Advanced Mode of Streaming 1 or Streaming 2: 3GPP Streaming mode: 3GPP Streaming is designed for specific mobile viewing.
Limited Warranty TRENDnet User’s Guide Audio/Video Setting >> Audio EVENT CONFIGURATION IP Camera supports 2‐way audio. Audio can be received by the microphone connected with IP camera and transmitted to remote PC. User can also send audio from remote computer’s microphone to IP Camera’s external speaker. Two‐Way Audio Select “Enable”, then you can see "Mic" and "Speaker" options on the live page. The Audio compression format can be chosen from 3 options. You can also adjust the volume of 2‐way audio.
Limited Warranty TRENDnet User’s Guide Event Configuration >> Motion Detection Based on the schedule: The motion detection will be triggered based on the schedule you define. Event Configuration >> Motion Detection >> Tampering Detection Tampering: Enable / Disable Tampering. When enabled and tampering is detected, the camera will send video or snapshot to Email, FTP, Output device or Samba.
Limited Warranty TRENDnet User’s Guide Event Configuration >> Motion Detection >> Record Time Setting Event Configuration >> Sound Detection >> Sound Detection When an event occurs, the IP camera can record a video clip or take snapshot, and then send to mail/ FTP/ Samba. Select the video recording length before and after event occurs.
Limited Warranty TRENDnet User’s Guide Click on the week calendar to draw color. The actions will be performed during the colored time. Event Configuration >> GPIO Setting When Record is enabled: Enabled / Disabled Destination: Select between sending the record to Samba or saving it into the SD card Record Time: Select the video length (seconds) When Snapshot is enabled: 1. I/O Connection Please connect the GND & DO pin to the external relay (buzzer) device.
Limited Warranty TRENDnet User’s Guide If you select "N.C" in "Input sensor setting", when external devise or circuit makes DI and GND pin disconnected, the camera input alarm is triggered, and then camera will execute the action user has set, for example, send snapshot to E‐mail address. Event Configuration >> GPIO Setting >> Output Setting Mode Setting - When event occurs, the camera triggers the external devise and lasts for certain of time according to the event "interval" setting.
Limited Warranty TRENDnet User’s Guide Event Configuration >> SD Card Event Configuration >> Logs Click "Logs" to see System Logs, Motion Detection Logs, GPIO Logs and All Logs. If you remove the power from IP camera, Motion Detection Logs will be cleared away. Playback: Event Record The record data that triggered by motion detection, sound detection, tampering detection, or GPIO is listed here. Click the date listed on this page, and it shows the list of the video.
Limited Warranty TRENDnet User’s Guide Playback: Schedule Record LOGOUT The scheduled record data or scheduled snapshot are listed here. Click the date listed on this page, and it shows the list of the snapshot and the video. Click the video to download and start your player to play the .avi file. Click the snapshot to watch the album. To delete the file, check it, then click "Del".
Limited Warranty TRENDnet User’s Guide Accessing the camera with Chrome 3. The camera app will be added to Chrome browser, click on Surveillance Client to launch the camera page. 4. Enter the IP address of the camera on the address bar and click Go. 5. Enter the user name and password to access the camera’s live view and configuration page. If you are viewing or configuring the camera by using the Chrome browser, please follow below steps. 1. 2.
Limited Warranty TRENDnet User’s Guide Troubleshooting 1. 2. a. I inserted the Utility CD‐ROM into my computer's CD‐ROM Drive but the installation menu does not appear automatically. What should I do? b. Windows 10/8/8.1 If the installation menu does not appear automatically, press the windows icon and press “r” simultaneously. In the “run” box, type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD‐ROM Drive, and then press the ENTER key on your keyboard .
TRENDnet User’s Guide Limited Warranty Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
