1. Before You Start g Package Contents « Flier converter « Quick Installation Guide = Power adapter Minimum Requirements « TIC-1600 chassis {optional} or sturdy, level surfaces that can support the weight of the Fiber Converter + 10/100 Bps Theme switch = Fiber cabals compatible with the flier converter's connector and medley specifications »Cat. 5, Cat. 5o, or Cat.
Installing r Con in 1. Unscrew the bay cover from the desired bay on the chassis. g 2, Unfasten the thumbscrew and remove the fiber converter from the metal casing. 3. Slide the fiber converter Into an available slot and fasten tha thumbscrew.
¥ T Forced Soda T Interrogate o R Tubful Duple Renter Note: = After changing the DIP Switch settings, power cycle the Flier Converter. + LL CF stands for Link Loss Camry Forward. When LL CF is enabled, the ports do not transmit a link signal until they receive a link signal from the opposite port. Link loss is “camped forward” to the managed switch or hub that is sending the ink. LL CF can be used for either the copper or fiber ports. = LLR stands for Link Loss Re tum.