User's Manual

Installation

Requirements

• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

• TCP/IP protocol must be installed on all PCs.

• For Internet Access, an Internet Access account with an ISP, and a DSL connection.

• To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE

802.11g, IEEE 802.11b or IEEE 802.11n Draft specifications.

Procedure

1. Choose an Installation Site

Select a suitable place on the network to install the Wireless ADSL Router.

For best Wireless reception and performance, the Wireless

ADSL Router should be positioned in a central location with

minimum obstructions between the Wireless ADSL Router

and the PCs.

Also, if using multiple Access Points, adjacent Access

Points should use different Channels.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the Wireless

ADSL Router. Both 10BaseT and 100BaseT connections can be used simultaneously.

If required, connect any port to a normal port on another Hub, using a standard LAN cable.

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the ADSL port on the Wireless ADSL Router

(the RJ11 connector) to the ADSL terminator provided by your phone company.