Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: EN60950-1: 2009 Safety of Information Technology Equipment EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300GHz) EN 300 328 V1.7.
Česky [Czech] TRENDnet tímto prohlašuje, že tento TEW-624UB je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW-624UB overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
TABLE OF CONTENT Introduction................................................................................................1 Overview of this User’s Guide .................................................................................1 Unpacking and Setup .................................................................................2 Unpacking .................................................................................................................2 Setup......................................
INTRODUCTION Congratulations on your purchase of this 300Mbps Wireless N Mini USB Adapter. This manual contains detailed instructions regarding the operation of this product. Please keep this manual for future reference. With the 300Mbps Wireless N Mini USB Adapter, a desktop or laptop computer can communicate with another computer wirelessly. An easy-to-use utility is bundled with the Wireless USB Adapter for configuration, monitoring, and diagnostic purposes.
UNPACKING AND SETUP This section provides unpacking and setup information for the 300Mbps Wireless N Mini USB Adapter. Unpacking The box should contain the following items: One TEW-624UB 300Mbps Wireless N Mini USB Adapter One Driver & Utility CD-ROM One Multi-Language Quick Installation Guide If any item is found missing or damaged, please contact your local reseller for replacement.
SOFTWARE INSTALLATION This section describes how to install the driver and utility for the 300Mbps Wireless N Mini USB Adapter. Windows Based Utility Installation 1) Insert the Utility and Driver CD-ROM into your computer’s CD-ROM Drive and then click Install Utility. 2) Follow the InstallShield Wizard Instructions 3) Click Finish to restart the computer.
4) Plug the 300Mbps Wireless N Mini USB Adapter into an available USB slot on your computer Wireless Utility Setting The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double-click the utility icon that appears in the taskbar. The Wireless Adapter Configuration Utility is divided into six sections: General, Profile, Available Networks, Status, Statistics and WPS. General This screen shows the general information of the wireless adapter.
Status: Shows connection status. Speed: Shows the transmission and the reception data rate. Type: Shows the connection type, Infrastructure or Ad-Hoc mode. Encryption: Shows the current encryption type used. SSID: Shows the current SSID, which must be the same as your wireless access point or router in order to establish the connection correctly. Wireless Mode: Shows the current wireless mode used.
Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing the particular Access Point or Wireless Router. Or you can search the desire wireless router or AP under Available Networks section and click on Add Profile button to add the Profile. Remove: Deletes the selected profile Edit: Edit an exist profile. The screen will back to profile.
Network Key: choose the encryption way, either in HEX or ASCII formats, and enter the password in the blank space. Key Length: select 64 or 128 bits as the length of the keys Key Format: HEX or ASCII Key Length Hex ASCII Type characters 0-9, A-F, a-f alphanumeric format 64-bit 10 characters 5 characters 128-bit 26 characters 13 characters WPA-PSK / WPA2-PSK If using the WPA-PSK/WPA2-PSK authentication method, please select the Encryption type for TKIP or AES then enter the Passphrase key.
Available Networks This screen allows the user to scan for available wireless network. It also allows the user to establish wireless communications with a target device. Available Networks – displays the wireless networks (wireless clients, access points or routers) that are within range. Select any one of the wireless networks and connect to it by double-clicking. Click the “Refresh” button to rescan for available networks.
Status Display the information of the adapter including manufacturer, driver version, utility version, encryption, encryption type, region, adapter’s MAC address, current connection data rate, channel, connection status, the associated router or Access Point’s SSID, network type, associated device’s MAC address, and Up time. SSID: Service Set Identifier, which is a unique name shared among all wireless clients in a wireless network.
Statistics This section displays the statistics of the adapter connection. TX means transmission and RX means Reception.
WPS Wi-Fi Protected Setup (WPS) is an optional certification program from the Wi-Fi Alliance that is designed to ease the task of setting up and configuring security on a wireless network. There are two methods used in the WPS as below instruction.
1) Click on the “Push Button Config(PBC)” button. 2) 3) Push the WPS button on your wireless access point or router. 4) Cliek the Next button start the WPS configuration. 5) If the WPS configuration was successful, the follow window will show on. 6) 7) If the WPS configuration was failed, the follow window will show on.
Enter a PIN Using the WPS configuration with the PIN Input method, the configuration steps as below: 1) Click on the Pin Input Config (PIN) button, the PIN is shown on the button of the windows. 2) Enter the PIN code into the WPS “Clint PIN number” of you wireless access point or router ( in example, TRENDnet TEW-652BRP Wireless N Router) then click the Start PIN button, the wireless access point or router will start the WPS configuration process.
3) Choose to select the specific AP/Router or a WPS enabled device with client PIN entered.
4) Select a wireless access point or router then click the Select button start the WPS configuration.
5) If the WPS configuration was successful, the follow window will show on. 6) If the WPS configuration was failed, the follow window will show on. Try to repeat the steps again if this screen appears. About screen displays information about the 300Mbps Wireless N Mini USB Adapter, such as the Driver and Utility version. When a new version of the utility becomes available for upgrade, users will be able to identify by version numbers.
TECHNICAL SPECIFICATIONS Hardware Interface USB 2.0, 1.1 standard Standards IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n WPS Button Enables WPS connection Power Consumption Receive mode: 200mA (max) ; Transmit mode: 400mA (max) Supported OS Windows 7 (32/64-bit) / Vista (32/64-bit) / Windows XP(32/64-bit) Dimensions (LxWxH) 33.9 x 17 x 7mm (1.3 x 0.7 x 0.3in) Weight 3g (0.1oz) Temperature Operating: 0° ~ 40° C (32° ~ 104° F) Storage: -10° ~ 70° C (14° ~ 158° F) Humidity Max.
LIMITED WARRANTY TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TEW-624UB – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. Governing Law: This Limited Warranty shall be governed by the laws of the state of California. Some TRENDnet products include software code written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Go to http://www.trendnet.com/gpl or http://www.trendnet.