User's Manual

13
Introduction
The TEW-815DAP 802.11ac (draft 2.0)3x3 Gigabit Wireless Access Point is an high-performance,
wireless Access Point that supports high-speed wireless networking at home, at work or in
public places.
Unlike most Access Points, the TEW-815DAP provides data transfers at up to 867Mbps when using
11AC connection. This Access Point is also back compatible with 802.11n or 802.11g or 11b
devices. This means that you do not need to change your entire network to maintain connectivity. You
may sacrifice some of 11ac’s speed when you mix 11ac /11n and 11b/g devices, but you will not
lose the ability to communicate when you incorporate the 11ac standard into your 11b/g/n network.
You may choose to slowly change your network by gradually replacing the 11b/g/n devices with 11ac
devices.
Features
• 1 x 10/100/1000Mbps LAN port
• 1 x Wi-Fi Protected Setup (WPS) button
• On/Off power switch (CE version only)
• Supports simultaneous 2.4GHz / 5GHz wireless networks
• Compliant with the latest draft 802.11ac wireless technology
• Backwards compatible with IEEE 802.11a/b/g/n wireless standards
• High-speed data rates up to 1300Mbps with 802.11ac and 450Mbps with 802.11n *
• IPv6 (Internet Protocol v6) basic function support
• Supports Wireless Distribution System (WDS) for wireless network bridging
• Advanced wireless security of up to WPA2-RADIUS
• Supports Wi-Fi Multimedia (WMM)
• Support VLAN Tagging
• One touch wireless connection using WPS button
• Configurable web interface using the latest version of Internet Explorer, FireFox,
Safari and Chrome
• 3- year limited warranty
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions. For maximum
performance of up to 1300Mbps, please use with a 3x3 802.11ac wireless adapter.
** Printer Control Center utility installation required for each computer in order to
access the print server