TBW-101UB TBW-102UB Bluetooth USB Adapter Quick Installation Guide Guide d'installation rapide de l'adaptateur USB Bluetooth Bluetooth USB-Adapter Kurzanleitung zur Installation Guía de Instalación Rápida del Adaptador USB Bluetooth Version 5.31.05 TRENDnet TRENDware, USA What's Next in Networking Copyright ©2005. All Rights Reserved. TRENDware International, Inc.
Table of Contents English ...................................................................................................... 1 1. Prepare for Installation ....................................................................... 1 2. Install Bluetooth Utility ....................................................................... 2 3. Disabling Bluetooth Services for Windows XP SP2 ........................... 5 4. Driver Installation ........................................................................
English QIG 1. Prepare for Installation Thank you for purchasing the TBW-101UB Bluetooth USB Adapter / TBW102UB High-Power Bluetooth USB Adapter. This adapter will allow you to share files, resources, and an internet connection between multiple Bluetoothenabled devices. Following the installation instructions should be quick and easy. If you run into problems, please refer to the Troubleshooting section or User's Guide on the CD-ROM. If you need further technical support, please visit www.trendnet.
2. Install Bluetooth Utility NOTE: You must install the Bluetooth Utility program before you install the Bluetooth USB Adapter. 1. Turn on your computer. 2. Insert the Utility CD-ROM into your CD-ROM Drive. 3. The Auto-Run function will automatically start the software installation wizard. If the Auto-Run function does not start automatically, please browse the installation CD to find the "Setup.exe" file. Double-click Auto-Run.exe to continue. 4. Select the language for this installation and click OK.
. Click Next. 6. Click Yes. 7. Click Next.
8. Select Yes, I want to restart my computer now and click Finish. 9. After restarting your computer, insert the TBW-101UB/TBW-102UB into one of your USB ports.
3. Disabling Bluetooth Services for Windows XP SP2 For Windows XP SP1/2000/ME/98SE users, please continue to section 4. Driver Installation Windows XP SP2 1. Click Start, click Run, type in msconfig and click OK. 2. Click the Services tab and uncheck Bluetooth Support Service by Microsoft Corporation. Click Apply and click Close.
3. Click Restart. 4. After restarting your computer, the System Configuration Utility will appear. Check Don't show this message and click OK.
4. Driver Installation Windows XP 1. After inserting the TBW-101UB/TBW-102UB into your USB slot, Windows will automatically install your drivers. Please continue to section 5. Pairing Bluetooth Devices.
Windows 2000/ME/98SE 1. Click OK. 2. Click Finish. 3. Click Yes to restart. If you do not get this message, please restart your computer manually.
5. Pairing Bluetooth Devices 1. Double-click the Bluetooth icon located at the bottom right-hand corner. 2. Click the orange globe to search for Bluetooth devices. 3. Double-click the Bluetooth enabled device.
4. All available Bluetooth services are highlighted in yellow for your convenience. Double-click the Bluetooth service you want to enable. In this example, Bluetooth File Transfer Service is selected. 5. The selected computer will be prompted for a password. This password can be anything from letters to numbers. However, make sure that both Bluetooth devices share the same password. In this example, the password is 123456. Type 123456 for both devices.
6. Click Yes for both devices. 7. After pairing both Bluetooth enabled computers, a list of shared files will appear. Download any selected file.
Français QIG 1. Préparation de l'installation Vérification du contenu de l'emballage Veuillez vérifier la présence des éléments suivants dans la boîte : Utility CD-ROM TBW-101UB/TBW-102UB TBW-101UB TBW-102UB Bluetooth USB Adapter Quick Installation Guide Guide d'installation rapide de l'adaptateur USB Bluetooth Bluetooth USB-Adapter Kurzanleitung zur Installation Guía de Instalación Rápida del Adaptador USB Bluetooth Version 5.31.
2. Installation de l'utilitaire Bluetooth Remarque : Vous devez installer le programme Bluetooth Utility avant d'installer l'adaptateur USB Bluetooth. 1. Allumez votre ordinateur. 2. Insérez le CD-ROM utilitaire dans le lecteur. 3. La fonction de lancement automatique lancera automatiquement l'assistant d'installation du programme. Si le lancement automatique ne s'effectue pas, parcourez le CD d'installation pour trouver le fichier « Setup.exe ». Doublecliquez sur Auto-Run.exe pour continuer. 4.
5. Cliquez sur Next (Suivant). 6. Cliquez sur Yes (Oui). 7. Cliquez sur Next (Suivant).
8. Sélectionnez Yes, I want to restart my computer now (Oui, je désire redémarrer mon ordinateur maintenant) et cliquez sur Finish (Terminer). 9. Après avoir redémarré votre ordinateur, branchez le TBW-101UB/ TBW-102UB à l'un de vos ports USB. of your USB ports.
3. Désactivation des services Bluetooth pour Windows XP SP2 Les utilisateurs Windows XP SP1/2000/ME/98SE sont invités à poursuivre avec le point 4. Installation des pilotes. Windows XP SP2 1. Cliquez sur “Start” (Démarrer), sur “Run” (Exécuter), tapez-y msconfig et cliquez sur OK. 2. Cliquez sur l'onglet Services et décochez Bluetooth Support Service de Microsoft Corporation. Cliquez sur Apply (Appliquer) et ensuite sur Close (Fermer).
3. Cliquez sur Restart (Relancer). 4. Une fois votre ordinateur redémarré, la fenêtre System Configuration Utility (utilitaire de configuration système) s'affichera. Cochez Don't show this message (Ne plus montrer ce message) et cliquez sur OK.
4. Installation du pilote Windows XP 1. Après branché le TBW-101UB/TBW-102UB à l'un de vos ports USB, Windows installera automatiquement vos pilotes. Veuillez poursuivre par le point 5. Appariement des périphériques Bluetooth.
Windows 2000/ME/98SE 1. Cliquez sur OK. 2. Cliquez sur Finish (Terminer). 3. Cliquez sur Yes (Oui) pour redémarrer. Si vous ne recevez pas ce message, veuillez redémarrer votre ordinateur manuellement.
5. Appariement des périphériques Bluetooth 1. Double-cliquez sur l'icône Bluetooth située dans le coin inférieur droit. 2. Cliquez sur la boule orange pour rechercher les périphériques Bluetooth. 3. Double-cliquez sur les périphériques Bluetooth.
4. Tous les services Bluetooth disponibles sont surlignés en jaune pour plus de commodité. Double-cliquez sur les périphériques Bluetooth que vous désirez activer. Dans cet exemple, le service de transfert de fichiers Bluetooth est sélectionné. 5. L'ordinateur sélectionné recevra un message demandant un mot de passe. Ce mot de passe peut se composer à votre choix de lettres ou de chiffres. Assurez-vous cependant que les périphériques Bluetooth partagent le même mot de passe.
6. Cliquez sur Yes (Oui) pour les deux périphériques. 7. Après avoir appareillé les deux ordinateurs activés Bluetooth, une liste des fichiers partagés apparaîtra. Téléchargez n'importe quel fichier sélectionné.
Deutsch QIG 1. Vorbereitung der Installation Prüfung des Packungsinhalts Prüfen Sie bitte, ob alle erforderlichen Einzelteile in der Packung vorhanden sind: Programm-CD TBW-101UB/TBW-102UB TBW-101UB TBW-102UB Bluetooth USB Adapter Quick Installation Guide Guide d'installation rapide de l'adaptateur USB Bluetooth Bluetooth USB-Adapter Kurzanleitung zur Installation Guía de Instalación Rápida del Adaptador USB Bluetooth Version 5.31.
2. Installation des Bluetooth-Programms Hinweis: Vor der Installation des Bluetooth USB-Adapters müssen Sie zuerst das Bluetooth-Dienstprogramm installieren. 1. Schalten Sie Ihren Computer ein. 2. Legen Sie die Programm-CD in Ihr CD-ROM-Laufwerk ein. 3. Die Autorun-Funktion startet automatisch den Assistenten zum Installieren der Software. Falls die Autorun-Funktion nicht automatisch starten sollte, suchen Sie bitte auf der Installations-CD nach der „Setup.exe“-Datei. Doppelklicken Sie dann auf Auto-Run.
5. Klicken Sie auf Next (Weiter). 6. Klicken Sie auf Yes (Ja). 7. Klicken Sie auf Next (Weiter).
8. Markieren Sie Yes, I want to restart my computer now (Ja, ich möchte meinen Computer jetzt neu starten) und klicken Sie auf Finish (Fertigstellen). 9. Sobald Ihr Computer neu gestartet ist, stecken Sie den TBW-101UB/TBW-102UB in einen USB-Steckplatz. of your USB ports.
3. Deaktivierung der Bluetooth-Services für Windows XP SP2 Benutzer von Windows XP SP1/2000/ME/98SE gehen bitte zu Abschnitt 4. Installation der Treiber. Windows XP SP2 1. Klicken Sie auf Start, dann auf Run (Ausführen), tippen Sie msconfig ein und klicken Sie auf OK. 2. Klicken Sie auf die Registerkarte Services (Dienste) und entfernen Sie die Markierung bei Bluetooth Support Service. Klicken Sie auf Apply (Übernehmen) und anschließend auf Close (Schließen).
3. Klicken Sie auf Restart (Neustart). 4. Nach dem Neustart Ihres Computers erscheint das Systemkonfigurationsprogramm. Markieren Sie Don't show this message (Diese Meldung nicht mehr anzeigen) und klicken Sie auf OK.
4. Installation der Treiber Windows XP 1. Sobald Sie den TBW-101UB/TBW-102UB in einen USB-Steckplatz gesteckt haben, installiert Windows die Treiber automatisch. Gehen Sie bitte zum Abschnitt 5. Kopplung der Bluetooth-Geräte.
Windows 2000/ME/98SE 1. Klicken Sie auf OK. 2. Klicken Sie auf Finish (Fertigstellen). 3. Klicken Sie auf Yes (Ja), um Ihren Computer neu zu starten. Falls diese Anzeige nicht erscheint, starten Sie Ihren Computer bitte manuell neu.
5. Kopplung der Bluetooth-Geräte 1. Doppelklicken Sie auf das Bluetooth-Symbol in der unteren rechten Ecke des Bildschirms. 2. Klicken Sie auf den orangefarbigen Ball, um die Suche nach BluetoothGeräten zu beginnen. 3. Doppelklicken Sie auf das Bluetooth-Gerät.
4. Alle verfügbaren Bluetooth-Geräte werden Gelb hervorgehoben. Doppelklicken Sie auf den Bluetooth-Dienst, den Sie aktivieren wollen. In unserem Beispiel wurde der Bluetooth-Dateiübertragungsdienst ausgewählt. 5. Der ausgewählte Computer wird aufgefordert, ein Kennwort zu senden. Dieses Kennwort kann aus Buchstaben und Zahlen bestehen. Achten Sie aber darauf, dass beide Bluetooth-Geräte das gleiche Kennwort benutzen. In unserem Beispiel lautet das Kennwort 123456. Tippen Sie für beide Geräte 123456 ein.
6. Klicken Sie für beide Geräte auf Yes (Ja). 7. Nach der Kopplung der beiden Bluetooth-fähigen Computer erscheint eine Liste der gemeinsam genutzten Dateien. Laden Sie die ausgewählten Dateien herunter.
Español QIG 1. Puesta a punto para la instalación Verificación de los contenidos del paquete Verifique que su caja contiene todo lo que incluimos en ella: TBW-101UB/TBW-102UB CD-ROM de la herramienta TBW-101UB TBW-102UB Bluetooth USB Adapter Quick Installation Guide Guide d'installation rapide de l'adaptateur USB Bluetooth Bluetooth USB-Adapter Kurzanleitung zur Installation Guía de Instalación Rápida del Adaptador USB Bluetooth Version 5.31.
2. Instalación de la herramienta Bluetooth Nota: Debe instalar el programa de la herramienta Bluetooth antes de instalar el adaptador USB Bluetooth. 1. Encienda su PC. 2. Inserte el CD-ROM de la herramienta en su unidad de CD-ROM. 3. La función auto-ejecutable iniciará automáticamente el asistente de instalación del software. Si la función auto-ejecutable no se inicia automáticamente, por favor busque el CD de instalación para ir al archivo “Setup.exe”. Haga doble clic en Auto-Run.exe para continuar. 4.
5. Haga clic en Next (Siguiente). 6. Haga clic en Yes (Sí). 7. Haga clic en Next (Siguiente).
8. Seleccione, Yes, I want to restart my computer now (Sí, deseo reiniciar mi PC ahora), y luego haga clic en Finish (Finalizar). 9. Tras reiniciar su PC, introduzca el TBW-101UB/TBW-102UB dentro de sus puertos USB.
3. Desactivación de los Servicios Bluetooth para Windows XP SP2 Para los usuarios de Windows XP SP1/2000/ME/98SE, vaya a la sección 4. Instalación del Controlador. Windows XP SP2 1. Haga clic en Start (Inicio), luego pulse Run (Ejecutar), después escriba msconfig y haga clic en OK. 2. Haga clic en la pestaña de Services (Servicios) y desactive el Bluetooth Support Service (Servicio de soporte Bluetooth) por Microsoft Corporation. Haga clic en Apply (Aplicar) y luego en Close (Cerrar).
3. Haga clic en Restart (Reiniciar). 4. Tras reiniciar su PC, le aparecerá la Herramienta de Configuración del Sistema. Marque, Don't show this message (No mostrar ese mensaje de nuevo) y luego pulse OK.
4. Instalación del controlador Windows XP 1. Tras introducir el TBW-101UB/TBW-102UB en la ranura USB, Windows instalará automáticamente sus controladores. Por favor vaya a la sección 5. Dispositivos de asociación o pairing Bluetooth.
Windows 2000/ME/98SE 1. Haga clic en OK. 2. Haga clic en Finish (Finalizar). 3. Haga clic en Yes (Sí) para reiniciar. Si usted no recibe este mensaje, por favor reinicie su PC manualmente.
5. Dispositivos de asociación o pairing Bluetooth 1. Haga doble clic en el icono Bluetooth ubicado en la esquina derecha inferior. 2. Haga clic en la bola naranja para buscar los dispositivos Bluetooth. 3. Haga doble clic en el dispositivo habilitado para Bluetooth.
4. Todos los servicios Bluetooth están resaltados en amarillo para su conveniencia. Haga doble clic en el servicio Bluetooth que desea habilitar. En este ejemplo, se ha seleccionado el Servicio de Transferencia de Archivo Bluetooth. 5. El PC seleccionado le pedirá una contraseña. Esta contraseña puede ser desde letras hasta números. Sin embargo, asegúrese de que ambos dispositivos Bluetooth compartan la misma contraseña. En este ejemplo, la contraseña es 123456. Escriba 123456 para ambos dispositivos.
6. Haga clic en Yes (Sí) para ambos dispositivos. 7. Tras asociar o pairing ambos PC habilitados para Bluetooth, le aparecerá una lista de archivos compartidos. Descargue cualquier archivo seleccionado.
Troubleshooting Q1: If the Device Status indicates that the Bluetooth USB Adapter is not working properly, what should I do? A1: Uninstall Air2U Bluetooth Device in Device Manager, and reinstall the Bluetooth utility. Q2: How do I set up connections between Bluetooth devices? A2: Refer to the User's Guide on the included CD-ROM or to TRENDnet's website for additional information.
TRENDnet TRENDware, USA What's Next in Networking @ Product Warranty Registration Please take a moment to register your product online. Go to TRENDware’s website at http://www.TRENDNET.com TRENDnet Technical Support US/Canada Support Center Contact Telephone: 1(310) 626-6252 Fax: 1(310) 626-6267 Email: support@trendnet.