FAQ

ManualsBrandsTRENDnet ManualsHeadphoneTBW-102UB

Q: How can I setup the Bluetooth adapter on my Computer to connect to my

Mobile Phone and then use the phone to dial-up to my Internet Service Provider?

Step 2. Install the Bluetooth adapter on the Computer according to the instructions in the

Bluetooth Adapter’s Quick Installation Guide. When the installation is completed, you

should see the “Bluetooth” utility icon in the “Taskbar” on the lower right hand corner of

the Windows Desktop. There should also be a “Bluetooth Utility” shortcut on Windows

Desktop screen.

Step 1. Please consult with your Mobile Phone’s manufacturer, make sure your Mobile Phone

supports the “Bluetooth File Transfer Services” and then turn on the phone’s “Bluetooth”

service

Below is an example on how to turn on the Mobile Phone’s Bluetooth service with a “Motorola

Razor V3” phone.

TBW-101UB/TBW-102UB F.A.Q.

Bluetooth Utility Shortcut

Summary of content (7 pages)

PAGE 1
TBW-101UB/TBW-102UB F.A.Q. Q: How can I setup the Bluetooth adapter on my Computer to connect to my Mobile Phone and then use the phone to dial-up to my Internet Service Provider? Step 1. Please consult with your Mobile Phone’s manufacturer, make sure your Mobile Phone supports the “Bluetooth File Transfer Services” and then turn on the phone’s “Bluetooth” service Below is an example on how to turn on the Mobile Phone’s Bluetooth service with a “Motorola Razor V3” phone. Step 2.
PAGE 2
TBW-101UB/TBW-102UB F.A.Q. Step 3. Double-click on the Bluetooth utility icon or the shortcut to open the utility. The example below is using “IVT Corp. BlueSoleil” utility version 1.4.9.2 with a TBW-101UB(v2) Bluetooth Adapter. Step 4. After opening the utility it will automatically search for any available Bluetooth devices nearby. Wait for approximately 20 seconds and the search result will display at the bottom of the utility window.
PAGE 3
TBW-101UB/TBW-102UB F.A.Q. Step 7. Enter a passkey of your choice and click “Ok”. You must use the same passkey on the remote device as well to successfully pair to that device. The Phone's Mac Address Step 8. On the remote device (i.e. Mobile Phone), you will see a prompt asking if you would like to “Bond” (pair) to the Computer (SONNY), select “Yes”.
PAGE 4
TBW-101UB/TBW-102UB F.A.Q. Step 9. Enter the same “passkey” from Step 7 and select “Ok”. Step 10. When the pairing is successful, in the utility window, you should see a small red “check mark” on the device. Note: To “unpair” the device, from the utility, right click on the device and select “Unpair” from the dropdown list.
PAGE 5
TBW-101UB/TBW-102UB F.A.Q. Step 11. After the computer’s Bluetooth adapter pairs to a Bluetooth device, the available “Services” of the Bluetooth device will be highlighted with a yellow outline. The example below shows the Mobile Phone has three Bluetooth services. Note: If the utility does not detect any Bluetooth services, from the utility, right click on the paired Bluetooth device, and select “Refresh Services”.
PAGE 6
TBW-101UB/TBW-102UB F.A.Q. Step 13. In the “Connect Bluetooth DUN Connection”, type in the dial-up Internet Service User Name and Password. Select whether to save the info for you or for anyone uses this computer and then enter the Internet Service Provider’s telephone number (include any prefix and area code). Click on “Dial” to make the connection. You should see the connection status on the computer’s screen and the Mobile Phone should show that it is making a call.
PAGE 7
TBW-101UB/TBW-102UB F.A.Q. Step 14. After the connection is made to the Internet Service Provider, the utility will display the “Bluetooth Dial-Up Networking Service” status as “Connected”. Also, in the “Taskbar”, you should see a new “Network Connection” icon and the Bluetooth icon should turn green. Placing the mouse over the “Network Connection” icon will display the connection status.