User Manual User Manual Trek Portable Wireless iSSD V01 User Manual
User Manual 1. Inside the box Hardware Description: 3 1. 2. 3. 4. 5.
User Manual 4 3 2 1 Item Battery Level Indicator Function Description LED battery level indicator: Red light 0 – 30% Blue light 30 – 65% Green light 65 – 100% Battery charging – LED light flashing Fully charged SSD Indicator Wireless Indicator – LED green light stay on SSD Data Read/Write -> Led flashing SSD Other condition -> Led off Power on –> Led light on Wi-Fi signal on and data transfer Battery Level Indicator SSD Read/Write Indicator Wireless Indicator Internet Indicator Int
User Manual Transmitter Wireless Charging Receiver charging compatible device.
User Manual 2. Operational Manual 2.3 Wireless connection a. First, scan QR code in user manual or in App Store/Play Store search for “Trek iSSD”, download and installed. 2.1 Power on/off Press power button once to turn SSD On /Off. 2.2 Connect to PC as normal portable SSD (USB mode) To link device to PC, use USB C Cable and press power button once for PC to access SSD storage. Press again to disconnect SSD. b.
User Manual 2.4 Battery Charging To charge device, connect device to any power source using USB-C cable or place device above any Qi-Certified wireless charging pad. For optimal charging performance, place device directly above wireless charging logo. 2.5 Power Bank Connect iSSD to mobile phone (or other device) using USB-A port, then press power button once to turn on and start charging.
User Manual 3.3 Online Playback/View Click on respective photo, music, video, or documents to start view or playback. 3.4 Tool Box a. Photo Album/ Contact Backup Backup photo album and contact is same method. Select photo album and click on “Backup Now” button to start backup. b. Digital Companion (External storage device backup) Backup files from other devices (USB thumbdrive, SD Card or microSD) to iSSD or vice versa.
User Manual c. WiFi Setting Make sure mobile phone is connected to device Wi-Fi, in Toolbox menu select Wi-Fi setting; change your desire SSID name. Click on Encryption and select WPA-PSK/WPA2-PSK. Key in your desired password and click confirm. d. Internet Setting Depend on your internet connection environment, select networking type. (PPPoe, Static IP, DHCP and Wireless relay) Most common use is wireless relay. In networking type select wireless relay.
User Manual e. Connected Device Management Control and managed connected device have permission to access internet and disk. f. Change Password (Under Me Tab) Change administrator password by keying in the old password, new password and confirm new password and click confirm. This will change the login password for the App.
User Manual 3.5 Guest Access Guest is only allows to access to guest folder only. Password is not required to access to guest account. Launch APP, click LAN login. Username select guest Click Login. 3.6 Restore Factory Setting (no delete files) Power on device and push reset button for 10 seconds to restore to factory setting. IMPORTANT NOTES: Please wait for 5 minutes to restart iSSD or else the device may damage. 3.
User Manual 4 Windows APP Introduction 4.1 Launch APP Before launch app, please turn on device into wireless mode. Click iSSD Windows icon to launch the app. 4.3 Login Page Login to device using administrator access. Note: Windows APP not support guest access. Key in password. Default password: 123456789 Click Login to access into device. Click Exit to exit APP. 4.2 WiFi Connection Click refresh button. Click SSID top down list to select device’s SSID. Key in password.
User Manual 4.4 Dashboard 4.5 Explore 3 4 2 1 1 5 6 2 Drive mount in administrator and guest partition Total disk capacity and free up space Access to partition drive Change login password ⑤ Change WiFi SSID name and password ⑥ List of devices connected to Trek iSSD.
User Manual 4.6 Internet Setting Change administrator password. 4.7 WiFi Setting Change WiFi SSID and password. 4.8 Connected Devices List show devices that connected to Trek iSSD.
User Manual 5 Troubleshooting 5.1 Connection between iSSD and PC via USB failed a. Make sure iSSD is power off. b. After connected iSSD to PC via USB-C cable, press power button once to activate USB mode. c. If still not working, please check or change another USB port in PC. 5.2 Charging for mobile phone via USB cable failed After USB 2.0 port is connected, press power button once to activate charging mode. 5.
User Manual 6 Safety Information 7 Warranty Card 1. Trek Portable Wireless iSSD contains Li-ion batteries. Do not open casing to avoid battery damage or other dangers. 2. Please do not dismantle , press, puncture, and short circuit Trek Portable Wireless iSSD , or expose the product to liquids, fire, or environments where temperature is higher than 700C. 3. During charging, it is advisable not to perform playback at the same time. 4.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.