Dear Sir or Madam, Thank you for purchasing product from APEMAN. Please read and follow this user manual carefully and keep it in a safe place for future reference. Just let us know if you encounter any problem during your use. Our support team will provide you our best solution without any delay. And all items purchased from APEMAN are covered by 12 months warranty. The warranty period varies and can be up to 12 months for different components.
Mounting Your Camera Attach your camera to helmets, gear and equipment. 通过场景+使用方法,展示配件的使用,让用户一目了然。 e.
Cautions • Keep it safe from falling and dropping. • Keep it distance from any strong magnetic interference objects like electrical machine to avoid strong radio waves that might be damaging the product and affect the sound or image quality. • Keep it safe from children while on charging. To fully charge the battery takes around 2 hours. We advise you to take the battery out of the camera after use in order to avoid loss of battery power.
1. Shutter Button 2. Power/ Mode button 3. Removeable Door of battery 4. Removeable Door of IO Port 5. Status Light 6. Front Screen 6 7. microSD™ Card Slot 8. Battery (加图) 9. Type -C USB Port 10. HDMI Port 11. Microphones 12. Speaker 13.
Camera features 1. Dual Screens SEEKER ONE’s vivid front screen lets you frame yourself effortlessly in any modes, while the back screen with IPS technology delivers a crystal-clear display and allows you to capture your best status at every moment. The touchscreen brings more convenience, enabling you use the camera with the touch of a button. 2. “Go APE Smooth “ Image Stabilization The brand new “Go APE Smooth” technology combining latest algorithms, delivers stable, shake-free footage. 3.
Start to Use Product installation 3. Insert the battery into the battery compartment in the direction of the electrode to ensure that the battery cover is closed after the complete insertion of the battery. MicroSD Card and Battery Setup 1. Press the battery cover switch in the arrow direction, and the battery cover will pop up automatically. 2. With your camera off, insert the microSD c ard into the c ard slot like as the label on the battery.
Know Your SEEKER ONE Know Your SEEKER ONE NOTICE: Keep your microSD card in good condition by reformatting it regularly. This will eras e all of your media, so be sure to sav e it first. 12 1. Swipe down on the rear screen to access the Dashboard. 2. Tap Preferenc es >SD Card> Format SD Card.
Know Your SEEKER ONE Know Your SEEKER ONE Select USB mode Connect to computer with Micro USB cable to select USB mode. You can see three modes BC(Battery Charge)、 UMS(USB Mass Storage)、UVC(1080P Webcam).You can directly touch the screen to select the mode you need.
Know Your SEEKER ONE Know Your SEEKER ONE Power On Press the Power/Mode button Front Screen SEEKER ONE’s front screen features a live view from the lens. This makes it easy to capture perfectly framed shots, when you want to take a selfie. to turn on your SEEKER ONE. Power Off Press and hold the Power/ Mode button for 2 seconds to turn it off. 1 2 3 4 1. Recording Time/Photos Remaining 2. Battery Status 3. Current Mode (Video, Photo, or Time Lapse) 4.
Know Your SEEKER ONE Know Your SEEKER ONE Display Options The front screen includes two display options that can easily change. 1. Swipe down on the rear screen to access the Das hboard. 2. Tap the to access the front screen settings. 3. Press the Power/ Power/ Mode button to bring it back to the rear screen. Using The Rear Touch Screen Setting Tap Select an item to turn it on or off. Description Displays the live preview as a full-screen shot.
Know Your SEEKER ONE Know Your SEEKER ONE Getting The Shot Capture Modes Your camera has three main capture modes. Simply press the Shutter button Press the Shutter button to start recording. again to stop recording (Video, Time Lapse). Using the rear touch screen, swipe left or right to the mode you want. With the camera on, you can press the Power/ Mode button to switch modes. Video Includes Standard, Sport, Cinematic, Vlog Portrait, Loop Recording resets. Photo Includes Photo, Burst, Night resets.
Know Your SEEKER ONE Know Your SEEKER ONE Changing Presets The Touch Screen Each capture mode has presets that makeit easy toswitch back and forth between the best mode and settings for your shot. The rear touch screen gives you access to your camera’s capture settings. 1. Tap the capture settings. 1 2 9H:59 100% 5 3 4 1. 2. 3. 4. 5. 20 Current Mode (Video, Photo, or Time Lapse) Recording Time/Photos Remaining Customizable On-Screen Shortc uts Capture Settings Battery Status 2.
Know Your SEEKER ONE Customizing The Presets You can change the settings in your presets with just a few taps. 1. Tap Know Your SEEKER ONE 3. Tap to save your changes and return to the presets screen. next to the preset you want to adjust. 2. Tap the setting that you want to change.
Know Your SEEKER ONE Know Your SEEKER ONE Restoring Presets To Their Original Settings You can go back to your presets’ original settings anytime. 1. Tap . 2.
Know Your SEEKER ONE Creating Your Own Presets Know Your SEEKER ONE 2. Tap , choos e a mode for your pres et. And the new mode will display on the first line. You can custom presets you want. 1. Tapthe capturesettings, and thenscroll tothe bottom of the presets list and tap.
Know Your SEEKER ONE Know Your SEEKER ONE Deleting Your Preset 1. Tap . 2. Tap 30 , delete your preset.
Using Snap Shot Using Snap Shot Snap Shot is the fastest and easiest way to power on your SEEKER ONE and get the shot. All it takes is the push of the Shutter button. Recording Video With Snap Shot 1. With your camera sleep off, press the Shutter button. 2. Press the Shutter button camera.
Video Setting Video Setting On-Screen Shortcuts Your SEEKER ONE comes loaded with five video presets. Each has its own specialty. Once you’ve chosen your preset, press the Shutter button recording. Press it again to stop. Standard (DEFAULT) A versatile preset that’s great for all-purpose recording. It shoots 1080p video at 60 frames per second (fps) for full-screen playback on your phone and TV.
Video Setting Video Setting Slow Motion 1. Tap before you start recording. 2. Press the Shutter button to start recording .
Video Setting Video Setting EIS Use EIS to maximize video stabilization. 1. Tap . before you start recording. 2. Press the Shutter button 50 to start recording.
Video Setting Video Settings Touch Zoom Touch Zoom helps you capture a closer view of the action. Metering 1. Tap . 1. Tap , you c an choose Av erage/Spot/Touch-Single/Touch-Multi for your shot with different expos ure. 2. Use the slider to choose how much you want to zoom. 3. Thezoom level is locked until youreadjust it, switchcapture modes, or turn off your camera.
Distortion Correct Correct lens distortion and adjust perspective. Here’s a breakdown of the video settings. Tap the make c hanges. and then the s etting to 1.
Video Settings Video Settings RES | FPS Resolutions (RES) are listed inthe top left. Frames per second (fps) are listed at the right of the screen. Frame rates for the resolution youselected are inwhite. Unavailable frame rates are in gray. Use higher frame rates to capture fast action or slow motion shots. The default resolution and fps will vary based on the preset you choose. HDR High Dynamic Range (HDR) is one of the image-processing techniques SuperPhoto uses to enhanceyour shots.
Taking Photos Your SEEKER ONE has four Photo presets. Simply choose the type of photo you want and press the Shutter button to get the shot. All photos are captured at 12MP. Photo Use this preset to capture a single photo. A single press of the Shutter button capture will a single photo. Taking Photos On-Screen Shortcuts The photo presets featurefour default shortcuts, but youcan swap them out with any shortcuts you’d like. Timer Use the Timer to set up a selfie, group shot, and more.
Taking Photos 2. You can set the time OFF/2 S /10 S you want. 3. Press the Shutter button . Your camera will start the countdown. It will also beep, and the front status light will blink.
Taking Photos Taking Photos Format 2.Scroll through the options, and then tap the one that you want SEEKER ONE lets you decide how y our photos are process ed and sav ed. Photo mode (s hooting one photo at a time) gives you the most options. Output Mode Description SuperPhoto Photo Automatically uses advanced image processing to give you the most brilliant photos possible in any lighting. May take longer to process each shot. Standard Photo, Burs t, Night Saves photos as standard .jpg files.
Taking Photos 3. Thezoom level is locked until youreadjust it, switchcapture modes, or turn off your camera. Metering Taking Photos SHOOTING SETTING Shooting Setting gives you manual and auto control of advanced settings. 1.Tap 1. Tap , you c an choose Av er age/Spot/Touch-Single/Touch-Multi for your shot with different expos ure. 2. Here’s where y ou c an mak e adjustments to your shooting settings. Metering SEEKER ONE scans the entire scene to choose the exposure level for your shot.
Taking Photos W hen a fac e is detected, ex pos ur e on the face is prioritized. Effect You can c hoos e different effect mode. It makes your photo with abundant expressive forms. Sharpness Sharpness controls the quality of details captured in your video footage or photos. Options for this setting are High (default), Normal. Scroll between the options to see a live preview of each setting, and then tap the one you want. Vivid Photo Set the Vivid Photo automatically color grades your footage.
Capturing Time Lapse Capturing Time Lapse On-Screen Shortcuts SHOOTING SETTING The timelapse presets include two default shortcuts, but youcanswap them out with any shortcuts you’d like. Touch Zoom Shooting Setting gives you manual and auto control of advanced settings. 1.Tap Touch Zoom helps you capture a closer view of the action. 1. Tap 2. Here’s where y ou c an mak e adjustments to your shooting settings. 2.Use the slider to choose how much you want to zoom.
Capturing Time Lapse Capturing Time Lapse Here’s whereyoucan make adjustments toyour Time Lapsesettings. Tap the and then tap the setting to make changes. HDR High Dynamic Range (HDR) is one of the image-processing techniques SuperPhoto uses to enhance your shots. It combines multiple shots into a single photo with better results than ever. Choose this setting if you want to use HDR every time you take a photo. 1. From the Photo settings, tap Output. 2. Select HDR.
Adjust the playback volume Playback Videos and Photos Add lock/unlock Tag Swipe up to see the last video, photo, or burst you took. Swipe left and right to flip through the other files on your SD card. The Media Gallery includes the following Playback options: Using Gallery View Pause playback Gallery view gives you quick access to all of the videos and photos stored on your SD card. Resume playback 1.From the playback screen, tap See all of the media on your SD card 2.
Deleting Multiple Files 1. 2. 3. Tap . Tap all of the files that you want to delete. Tap a file again if you want to de-select it. Tap to delete the selected files.
Setting Your Preferences Setting Your Preferences USING TH E DASH BO ARD Preferences Setting With your camera in landscape orientation, swipe down onthe rear screen to access the Dashboard. Preferences let you set up your SEEKER ONE any way you want. Connections Choose 5GHz or 2.4GHz as your connection speed. Set 5GHz only if your phone and region support it. TOUCH SCREEN Adjust Orientation, set the Screen Saver.
Setting Your Preferences Setting Your Preferences System Setting Restore the device name you set to the serial media name. Auto Power Off Choose 10 Min(default), 15 Min, 20 Min, or Never. Reset Camera Tips See all of the camera tips from the beginning. Beep Sound Choose Max, High (default), Mid, Low, or Mute. The volume you set here can be toggled on off using the Dashboard. Factory Reset Restore all of your camera’s settings and clear all connections.
Connecting To The Go APE APP 6 Download App Search and download “Go APE” from the Apple© App Store© or Google Play™ on your smart device. Wi-Fi Connection Connect your phone to the camera wirelessly. You can see the camera picture, control the camera, and download recordings from the camera to your phone. 1. 2. 1 2 7 3 8 Turn on the camera, then the Wi-Fi will turn on automatically. Open the “Go APE” App on your phone. Connect the camera to your phone.
FCC compliance statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC SAR statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.