Spectrum 2.4Ghz, TX Board User Manual Version 1.
.4GHz Transmitter User Interface Specification Version: 1.0 Date: 12/12/2011 10:41:00 AM Revision History Date Version Description Author 8/1/2011 1.0 Original. Chris S.
2.4GHz Transmitter User Interface Specification Version: 1.0 Date: 12/12/2011 10:41:00 AM Table of Contents 1. INTRODUCTION ...............................................................................................................................................5 2. USERS GUIDE INFORMATION ......................................................................................................................6 2.1 2.2 2.3 2.4 3. ANTENNA REGULATION ...................................................
2.4GHz Transmitter User Interface Specification Confidential Version: 1.
2.4GHz Transmitter User Interface Specification Version: 1.0 Date: 12/12/2011 10:41:00 AM 1. Introduction The user manual contains information pertaining to output power, operating frequency, operating channels, data rates, tuning range, intended use, general installation instructions, and antenna connector and gain information. .
2.4GHz Transmitter User Interface Specification Version: 1.0 Date: 12/12/2011 10:41:00 AM 2. Users Guide Information It is required that Traxxas LLP place the text below in the product user guide along with all other pertinent regulatory information. We are only using the module on our own motherboard, and there is sufficient filtering on the module for the supplied voltage supply.
2.4GHz Transmitter User Interface Specification Version: 1.0 Date: 12/12/2011 10:41:00 AM These emission tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Traxxas, but should be kept on file by the OEM. 2.3 Working with Additional Transmitters The Spectrum 2.4GHz, TX Board should not be operated with any other transmitter in the end product.
2.4GHz Transmitter User Interface Specification Version: 1.0 Date: 12/12/2011 10:41:00 AM 3. FCC RF Exposure Statement “This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specified operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.