USER MANUAL FCC ID : 2ARXP-TFT1 IC : 24596-TFT1
INSTALLING YOUR TRAQFREQ 1. Download and launch the TraqFreq mobile app from the app store. 2. Move to a location at least 10 feet away from any other TraqFreq, Bluetooth or WiFi device to ensure best pairing experience. 3. Use your fingernail or credit card in the opening slot and twist to open the device enclosure. 4. Insert the battery into the device with the positive side (+) facing up and snap the enclosure together. 5.
OPERATION AND USE 1. Follow the instructions in the ‘Installing your TraqFreq’ section for proper installation. 2. Play your instrument as you would normally play. There is no need to directly interact with the TraqFeq device; your playing statistics and climate conditions are automatically recorded on the device as you play. When you don’t play, the device automatically shuts down when not in use, and it automatically starts up when you move your instrument and start to play. 3.
CHANGING THE BATTERY 1. Use your fingernail or credit card in the opening slot and twist to open the device enclosure. 2. If you installed your TraqFeq in an accessible location, the one half of the enclosure that’s attached to your instrument with the double-sided tape will remain on the instrument. The other half that comes off will contain the battery and its compartment so you do not need to remove the one half with the doublesided tape.
COMPLIANCE INFORMATION FCC ID: 2ARXP-TFT1 IC : 24596-TFT1 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
WARRANTY INFORMATION WARRANTY – U.S. TraqFreq, LLC warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one (1) year from the date of purchase, if it is properly used and maintained. If this product proves defective in either material or workmanship, TraqFreq, at its option, will (a) repair the product, or (b) replace the product, at no charge for parts or labor.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.