User Manual

i-Blue737A
+
Quick Installation Guide
Thank you for purchasing i-Blue737A
+
66-Channel Bluetooth GPS Receiver. It supports ultra high
sensitivity GPS navigation and supports Smart Power control for power saving.
Main features:
 Semi indoor fixed
 AGPS available
 66 channels Bluetooth GPS
 Smart Power Save Mechanism
 Fuzzy Auto On/Off
A. Standard Package
GPS Unit i-Blue737A
+
(1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + USB to mini USB cable
1. 2. 3.
B. Appearance
1. Power jack (mini USB type)
2. Power switch
3. Battery status LED (Red/Green)
4. Bluetooth status LED (Blue)
5. GPS status LED (Orange)
6. Internal antenna
C. Charging your battery
D. Start to use
D-1 Fully charge the battery when using at the first time
A fully charged battery can last up to 32 hours continuously operation.
D-2 Activate the Bluetooth function in your PDA/Smart phone or PC
Before activating the Bluetooth function in your PDA/PC, please switch on i-Blue737A
+
Receiver for paring and check if your device is
equipped with Bluetooth function. If not, you may need to acquire an optional CF/SD Bluetooth card or Bluetooth dongle.
NOTE: The pairing procedure is required to execute in the first time only. And the pass code is “
0000” if required.
D-3 Automatically create a shortcut in Bluetooth Manager window
After the pairing complete, the system will then find a quick connect device “BTGPS” in Bluetooth Manager. In further use, you just need to
click it to connect to this Bluetooth GPS Receiver.
D-4 Check the Serial Port in Bluetooth Setting
After complete pairing with the Receiver, please click “Serial Port” to confirm the assigned COM port. If you use PDA/PC to pair the GPS
Receiver, please check “Outbound COM port”.
D-5 Set correct Serial Port in your map software
Activate your navigation software and make sure to select the correct “Serial Port”.
NOTE: In the map software such as TomTom, you might need to change preference and set “Other Bluetooth GPS” according to
PDA/phone model. In some case please consult map software company to vary the setting if you have issue on positioning.
D-6 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then the Bluetooth connection will be disconnected automatically. Then put
i-Blue737A
+
power switch to “OFF” position.
E. Function of Smart Power Control (Power saving mode)
i-Blue737A
+
supports Smart Power control (Power saving mode). It can automatically enter sleeping mode after the Bluetooth connectivity
is turned off, so the Blue LED will turn to flash every 5 seconds. Thus you can always power it on with very low power consumption.
Under power saving mode, when detecting Bluetooth is being connected, i-Blue737A+ will wake up itself and the blue LED will turn to flash
every 2 second and GPS Orange LED will be also on.
For the first time using the i-Blue737A
+
, please charge battery until it is fully
charged. Take the power cable and connect it to the power jack (mini USB
type) and recharge through car cigarette adaptor. This will begin to charge
the battery. Charging time is 3 hours typically.
- When the Power LED is Red, battery power is low status. Please recharge.
- When the Power LED is Green, the battery is under charging mode.
- When the Power LED is off, the battery is fully charged.
5
4
1
3
2
6
P/N：8029712001A