2.
Copyright © 2012 All rights reserved. TRADEMARKS All product names, trademarks or logos mentioned herein are the properties of their respective owners. Microsoft, Windows, and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
Contents CHAPTER 1: Getting Started.............................................................. 1-1 Unpacking.........................................................................................1-2 Optional Items............................................................................1-2 Device Overview...............................................................................1-3 Front View..................................................................................
Opening the Input Panel............................................................2-5 Managing the Input Panel..........................................................2-5 Using the Panel Keys........................................................................2-6 Adjusting Volume.......................................................................2-6 Adjusting Screen Brightness......................................................2-6 Using Wireless LAN.................................................
CHAPTER 4: Managing Power........................................................... 4-1 Battery Pack......................................................................................4-2 Charging the Battery Pack.........................................................4-2 Checking the Battery Level........................................................4-3 Replacing the Battery Pack.......................................................4-4 Power Management................................................
About the Adapter.....................................................................B-5 FCC Regulations...............................................................................B-6 RF Exposure Information (SAR) .......................................................B-7 IC Regulations...................................................................................B-7 Important Note...........................................................................
Preface This manual contains information that will help you operate this rugged Tablet Computer. It is divided into six chapters and two appendices. • Chapter 1: Getting Started, takes you through the process of setting up your Tablet Computer and identifying its external components. • Chapter 2: Operating Your Tablet Computer, tells you how to use the Tablet Computer’s components and features. • Chapter 3: Connecting Your Tablet Computer, provides information on installing and using peripheral devices.
Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: Identifies additional information that requires special attention. CAUTION: Identifies important information that, if not followed, may result in loss of data or damage to the Tablet Computer.. Hardware and keyboard keys are shown in a bold typeset. For example: Press the F1 key to complete.
CHAPTER 1 Getting Started Congratulations on purchasing this rugged Tablet Computer. The rugged design allows you to use it in harsh outdoor environments. You can use it under blazing heat, subzero cold, driving rain or dusty surroundings – places you could not take a consumer-grade Tablet Computer. This chapter tells you step by step how to get the Tablet Computer up and running.
Unpacking After unpacking the shipping carton, you should find these standard items. Inspect all items. If any item is damaged or missing, notify your dealer immediately. √ Tablet Computer √ Battery Pack 2.
Device Overview Front View 6 7 1 2 2.0MP 8 3 9 4 10 5 11 No. Item Description 1 Barcode Scanner Button Press to activate the barcode scanner located on the top left corner of the Tablet Computer. 2 Web Camera Use for video chatting and other interactive applications. 3 Up Key ▲ On menu selection, moves the cursor up or increases a value. 4 Down Key ▼ On menu selection, moves the cursor down or decreases a value.
No. 5 Item • Solid green: Tablet computer is turned on • Blinking green: Tablet computer is in sleep mode. • Off: Tablet computer is turned off. Power 6 Ambient Light Sensor Adjusts the screen brightness according to the current ambient light. 7 Microphone Use for chatting and other interactive applications. 8 Touch Screen Displays and receives information for the Tablet Computer.
Rear View (Standard Model) 1 2 3 4 5.0MP AF 5 5 6 6 7 8 No. Item 9 Description 1 Speaker Sends out sound and voice from your Tablet Computer. 2 Camera Flash Provides flash lighting for use with the camera. 3 CMOS Camera Allows you to use the camera features. 4 Expansion Port Connects to expansion modules, such as an RFID Reader, Smart Card Reader, etc. Note: Expansion modules are optional items and are sold separately. 5 Battery Lock • Slide up to unlock the battery latch.
No. 8 Item Description Battery Button Press the button to light the battery status LEDs. The LEDs automatically go off after 5 seconds. Battery Status LEDs Shows the battery capacity.
Rear View (Expanded Model) 1 2 3 4 5 6 7 7 8 9 No. Item 10 Description 1 Expansion Module Provides additional features for the Tablet Computer. 2 Camera Flash Provides flash lighting for use with the camera. 3 CMOS Camera Allows you to use the camera features. 4 Expansion Module Screw Secures the expansion module to the Tablet Computer. 5 4G SIM Card Slot Stores a 4G SIM card which provides 4G data network capability to the Tablet Computer.
No. 10 Item Battery Status LEDs Description Shows the battery capacity.
Top and Bottom View 1 2 3 Top View Bottom View 4 5 No. Item 6 7 Description 1 Audio Connector Connects to a set of headphones, external speakers, or an audio recording device. 2 Antenna Receives and transmits wireless signals. WARNING: It is highly recommended not to use your Tablet Computer upside down. 3 Barcode Reader Reads barcodes. 4 SIM Card Slot Stores the SIM card which provides 3G data connection to your Tablet Computer.
Left and Right Views Left View Right View 1 5 2 6 3 7 4 No. Description 1 Kensington Lock Provides lock mechanism security. 2 Power Button • Short press to enable sleep mode. • Long press to turn the Tablet Computer off. USB Port Connects to a USB device, such as a USB flash drive, mouse, printer, keyboard, etc. Mini USB Port Connects to a USB device, such as a computer, printer, scanner, etc. HDMI Connector (Type D) Connects to an HDMI device such as an external monitor.
Installing the Stylus Your Tablet Computer comes with a stylus for use with the touch screen. The stylus holder at the bottom of the Tablet Computer provides a convenient place to store the stylus. Perform the following to prepare and install the stylus to your Tablet Computer: 1. Loop one end of the tether to the stylus eyelet. 2. Loop the other end of the tether to the Tablet Computer eyelet. 2 1 3. Insert the stylus into the stylus holder until it locks into place.
Installing the Memory Card The Tablet Computer has a memory card slot that supports file transfer and provides additional storage space for the Tablet Computer. Perform the following to install a microSD card to your Tablet Computer: 1. On the right side of the Tablet Computer, open the memory card slot cover. 2. Insert the microSD card with the gold contacts facing down. 3. Push the microSD card until it clicks into place. 4. Close the SIM card slot cover. Removing the Memory Card 1-12 1.
Installing the SIM Card The Tablet Computer supports data connection using 3G SIM cards. Perform the following to install the SIM card to your Tablet Computer: 1. Make sure the Tablet Computer is turned off. 2. On the bottom side of the Tablet Computer, open the SIM card slot cover. 3. Insert the SIM card with the cut-off corner side first and the gold contacts facing the front of the device. 4. Push the SIM card until it clicks into place.
Installing the Battery Pack Perform the following to install the battery pack to the Tablet Computer. 1. Place the Tablet Computer face down on a flat even surface. 2. From the bottom side of the battery pack, align and place the battery pack on its bay. 3. Slide the battery latches inward to the “close” position (A). 4. For a more secured installation, slide the battery locks to the lock ( ) position (B).
Connecting to Network The Tablet Computer can connect to a local area network or the Internet via wired or wireless connection (see “Using Wireless LAN” on page 2-7). To connect the Tablet Computer via wired connection, perform the steps below: 1. On the right side of the Tablet Computer, open the network port cover. 2. Connect one end of an Ethernet cable to the Ethernet port of the Tablet Computer. 3. Connect the other end to a wall socket or a network hub.
Connecting to AC Power The Tablet Computer operates either on the external AC power or internal battery power. It is recommended to use AC power when you start up the Tablet Computer for the first time. CAUTION: Use only the AC adapter included with your Tablet Computer. Using other AC adapters may damage the Tablet Computer. Perform the following to connect the Tablet Computer to AC power: 1. On the left side of the Tablet Computer, open the power connector cover. 2.
CAUTION: • When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the Tablet Computer. A reverse procedure may damage the AC adapter or the Tablet Computer. • When unplugging the connector, always hold the plug head. Never pull on the cord. Turning the Tablet Computer On and Off Turning On 1. Make sure that the Tablet Computer is either connected to TouAC power or the battery pack is charged. 2. Press the power button ( ).
Turning Off To turn off the Tablet Computer, use the “Shut Down” command of your operating system. CAUTION: Wait for at least five seconds after turning off the Tablet Computer before turning it back on. When you finish a working session, you can stop the Tablet Computer by shutting it down or leaving the Tablet Computer in Sleep or Hibernation mode: To stop in this mode... Off Do this... Use the Windows Start Menu and follow the shut down procedure.
CHAPTER 2 Operating Your Tablet Computer This chapter provides information about the use of the Tablet Computer and describes the operating basics of these components and features: • Touch Screen • Input Panel • Panel Keys • Wireless LAN Features • Bluetooth Features • 3G Network Features • GPS Features • Camera • Barcode Reader • Fingerprint Reader Operating Your Tablet Computer 2-1
Using the Touch Screen The touch screen is a touch-sensitive device that allows you to control and make selections on the Tablet Computer by controlling the location of the pointer on the screen. CAUTION: Do not use sharp or pointed objects on the touch screen. These objects may scratch the screen. Use only the spring-tip end of the stylus or the tip of your finger. 2.0MP Here are some common terms that you should know when using the touch screen.
Calibrating the Screen When there is a noticeable discrepancy in the placement of the stylus on the screen and the indicated position of the onscreen pointer, recalibrate the screen. Perform the following to calibrate the screen: 1. Tap Start > Control Panel > Tablet PC Settings. 2. On the Display tab, tap Calibrate. 3. Tap the cross-hair with the stylus as it moves around the screen. 4. When calibration is complete, tap Yes to close the calibration utility screen.
Using the Input Panel The Tablet Computer Input Panel is a virtual keyboard that allows you to enter text and perform various keyboard functions. There are two types of Input Panels for you to use: 2-4 • Touch Keyboard Allows you to enter text by tapping the keys with the stylus, like pressing the keys on a standard keyboard. • Writing Pad Allows you to write on the writing pad, like writing on a piece of paper. Your handwriting will be converted into typed text.
Opening the Input Panel To open the Input Panel From the left side of the screen, drag the edge of the Input Panel towards the center. To switch between keyboards To switch between the Touch Keyboard and the Writing Pad, tap at the upper left corner of the Input Panel. or Managing the Input Panel To change the Input Panel size To increase the size of the Input Panel, select the lower right corner of the Input Panel and drag.
Using the Panel Keys The Panel Keys provide shortcuts for you to utilize the functions of your Tablet Computer, such as adjusting the brightness setting or volume, and others. Adjusting Volume Peform the following to adjust the volume of your Tablet Computer: • To increase volume, press ▲ or ► repeatedly. • To decrease volume, press ▼ or ◄ repeatedly.
Using Wireless LAN Your Tablet Computer has a built-in wireless antenna which automatically detects wireless networks that are within range. It takes approximately 30 seconds for your Tablet Computer to make a successful wireless connection and approximately 10 seconds to disconnect. WARNING: It is highly recommended not to use your Tablet Computer upside down. Turning the Wireless Antenna On and Off By default, the wireless antenna is turned on.
Connecting to a Wireless Network Perform the following to connect to a wireless network: 1. Make sure that the wireless antenna is “on” (The Wifi LED indicator in solid green and the Wireless network icon on the taskbar shows ). 2. Tap the Wireless Network icon ( 3. In the list of available networks, tap a network. 4. Tap Connect. 5. If the network requires authentication, enter the security key or passphrase. ) on the taskbar.
Using Bluetooth Your Tablet Computer has integrated Bluetooth capability for short-range wireless communication between Bluetooth-enabled devices. By default, the Bluetooth feature is enabled as indicated by the Bluetooth icon ( ) on the taskbar; but your Tablet Computer is not visible to other devices. To make your Tablet Computer visible, check the Discovery box in Bluetooth settings (see “Configuring Bluetooth Settings” on page 2-12).
2-10 3. Tap Add a Device. The Tablet Computer will scan for Bluetooth devices within range. 4. Tap the device you want to pair with, then tap Next. 5. Depending on the device you are pairing, you may be prompted to enter or verify the pairing code. The pairing code entered or shown on your Tablet Computer and the Bluetooth device must be the same. Click Next to continue.
6. Windows will check for the device driver and install, if necessary. Tap Close to close the screen. Depending on the paired Bluetooth device, you may use your Tablet Computer speakers to listen to music played from the Bluetooth device, transfer files, and more. NOTE: For more information on using Bluetooth features, see Windows online help.
4. Tap and hold the Bluetooth device to display the pop up menu. 5. Tap Advance Operation, then tap the applicable connection operation. When a Bluetooth device wants to pair with your Tablet Computer, a pop up message appears on the taskbar, tap the message to pair with the device. Configuring Bluetooth Settings The Bluetooth Settings allows you to configure how you want to connect to Bluetooth devices, sync data, and other options.
Using 3G Network Your Tablet Computer has 3G network capabilities that provide wireless connection to the Internet using a SIM card with data subscription. Connecting to 3G Network Your Tablet Computer comes with Sierra Wireless AirCard® Watcher, an application that allows you to connect to the Internet using your SIM card and keeps you informed of your wireless connection status. Perform the following to connect to your 3G network: 1.
Using AirCard® Watcher The AirCard® Watcher main screen 7 8 1 2 3 9 4 10 5 11 6 No. 1 Item 3G On/Off Signal Strength Network Type 2 2-14 Toolbar Description • Green: 3G network is on. • Red: 3G network is off. • Green: Indicate the network signal strength. More lit bars indicate stronger signal. • Red: No signal. Indicates the network connection type. Tap an icon to access the function. Wireless Profile Tap to view and modify wireless network profile.
No. Item 2 AirCard GPS Tap to open AirCard GPS Monitor. Settings Tap to access the AirCard® Watcher settings. See “Configuring AirCard® Watcher Settings” on page 2-16. Help Description Tap to view the help file. 3 Network Name Displays the name of the SIM card network provider. 4 Data Transfer Rate Displays the upstream and downstream transfer information. 5 6 7 Home Tap to open the Sierra Wireless website. Speed Graph Tap to display a graphical table of the data transfer speed.
Configuring AirCard® Watcher Settings On the AirCard® Watcher main screen, tap the Settings ( screen below. ) icon to display the Tap a menu item on the left panel to display the corresponding settings on the right. The following menus are available: Menu 2-16 Description General Configures startup/shutdown settings, warning messages, display properties, and others. Messaging Configures message settings such as service center number, default storage, and message notification.
To configure 3G network profiles Once a SIM card is used in your Tablet Computer, its network profile is created. You can view network information, such as profile name, access point name (APN), TCP/IP settings, and more. You can also set AirCard® Watcher to automatically connect to the 3G network at startup. 1. On the AirCard® Watcher main screen, tap the Wireless Profile ( NOTE: Alternatively, you can also access the Profiles menu, by tapping Profiles on the left panel. 2. ) icon.
2-18 4. To view the SIM card information, tap the network name on the left panel. 5. Tap OK to close the screen.
Using GPS Your Tablet Computer has a GPS (Global Positioning System) receiver module built in and includes the u-blox GPS Location Sensors software. u-blox GPS Location Sensors is an application that allows you to manage the following: • Location • Assistance • Satellites To open u-blox GPS Location Sensors, tap Start > All Programs > u-blox > u-tray > u-tray 1.1.0.4 Location The Location tab provides an overview your location and system status.
Assistance The Assistance tab allows you to set the schedule and download assistance data. 2-20 • To download update manually, tap Download Assistance Data. • To set automatic download, check the Automatic box and select the frequency of automatic download in Offline validity.
