Rugged Tablet PC M9700 Rugged Tablet PC ® (Intel Atom Duo Core N2600 Based Tablet PC) USERS MANUAL Version: 1.2 9.
Rugged Tablet PC IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully before using the product and save for later reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Clean the product with a damp soft cloth. Do not use liquid or aerosol cleaners as it may cause permanent damage to the screen. Do not use this product near water. Do not place this product on an unstable cart, stand, or table.
Rugged Tablet PC Copyright Notice Copyright © 2012 Winmate Communication Inc., ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Winmate Communication Inc.
Rugged Tablet PC Customer Service We provide service guide for any problem as follow steps ： First, visit the website at http://www.winmate.com.tw to find the update information about the product. Second, contact with your distributor, sales representative, or our customer service center for technical support if you need additional assistance.
Rugged Tablet PC Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Rugged Tablet PC FEDERAL COMMUNICATIONS COMMISSION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Rugged Tablet PC RF exposure information (SAR) This Rugged Table PC meets the government's requirements for exposure to radio waves. This Rugged Table PC is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless Rugged Table PC employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Rugged Tablet PC Packaging List This product is shipped with the items list below. Please make sure that all are in your package. Item 1 2 3 4 5 Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S. Std type, 1.
Rugged Tablet PC Contents IMPORTANT SAFETY INSTRUCTIONS............................................................2 PACKAGING LIST ..................................................................................................6 CHAPTER 1 GETTING STARTED...................................................................... 10 1.1 CONNECTING THE AC POWER................................................................................ 10 1.2 TURNING ON AND OFF THE TABLET PC.................................
Rugged Tablet PC 10
Rugged Tablet PC CHAPTER 1 Getting Started 11
Rugged Tablet PC CHAPTER 1 GETTING STARTED This chapter guides you to get the Rugged Tablet PC ready for operating. 1.1 Connecting the AC Power Our tablet PC can operate either on the external AC power adapter or internal battery power. It is suggested that you use AC power when you start up the tablet PC first time. **Caution Use only the AC adapter included with your tablet PC. Using other AC adapters may damage the tablet PC. 1.
Rugged Tablet PC 1.2 Turning On and Off the Tablet PC 1.2.1 Turning on the Tablet PC 1. Place your tablet PC on a flat and stable surface or holding the tablet PC on your hand. 2. Make sure that the tablet PC is either connected to AC power or the battery pack with power. 3. Press the power button on the right side by 2-3 seconds to start it. 1.2.2 Turning off the Tablet PC To turn off the tablet PC power, use the “Shut Down” command of your operating system.
Rugged Tablet PC 1.3 The Optimized Use for Sunlight Readable Touch screen. With the imposed reflective function, the modified LCD can reflect the ambient light passing the LCD cell and utilize the reflected light beams as its illumination. The stronger the ambient light is, the brighter the LCD will appear. As a result, the modified LCD is viewable under lighting conditions. The optimized angle of view is fourty-five degree. And the optimized distance of view is 30cm.
Rugged Tablet PC 1.4 Taking a Look at I/O Functions (for 9.7 inch Tablet PC) This section we will show the Tablet PC external connection parts and their functions. Front side Control Functions Hot Key: Vol-, Vol+, F1. Menu Item 1 2 3 4 5 Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S.
Rugged Tablet PC LED Indicator Status Description LED Indicator Item 1 2 3 4 5 Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S. Std type, 1.8m) LAN (female) Adapter cable Green light： when storage under operation. No light when storage stop operation.
Rugged Tablet PC Right side Input Power Button LAN / HDMI Item 1 Item 1 2 Item 1 2 3 Description Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide Description No Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7) Description Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide.
Rugged Tablet PC Item 1 2 Description Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7) Through the first Chapter 1.1 to 1.4, you can understand the basic information when you own the machine, in next Chapter you will understand more detail about how to operate the tablet PC. Between this, you can check our product function and specification.
Rugged Tablet PC 1.5 Product Features and Specification 1.5.2 Product Features Our Rugged Tablet PCs are designed with state of the art industrial use, versatile functionality and solid products. With great mobility support and battery management. The 9.7” rugged tablet provides an alternative solution for those between general consumer and extremely rugged application. ? 9.
Rugged Tablet PC 1.5.2 Product Specification The product specification as the following table description: System Specification Item 1 2 3 4 5 Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S. Std type, 1.
Rugged Tablet PC System Specification (continues) Item 1 2 3 4 5 Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S. Std type, 1.
Rugged Tablet PC CHAPTER 2 Operating Tablet PC and HotTab Hotkey Utility 22
Rugged Tablet PC CHAPTER 2 OPERATING TABLET PC AND HOTTAB HOTKEY UTILITY This Chapter will guide you how to operate the Tablet PC, including start / stop the PC, and how to use menu function including basic hardware function adjustment and the HotTab hotkey utility software that is very easy & helpful for operating the computer. 2.
Rugged Tablet PC 2.2 Quick to Know Menu and HotTab Hotkey Function This section will introduce you about our easy-of-use function buttons. Our Tablet PC function buttons support very easy way and useful function to adjust Brightness, Volume and watch Battery current status. For programmable Hotkey function can also be defined by user to control by their common use application. 2.2.
Rugged Tablet PC Menu Function Adjustment c k / U n l o c k **NOTICE If you shutdown the Tablet PC during operating system(B y Touch) under a l l b u t t o Item Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 2 3 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S. Std type, 1.
Rugged Tablet PC f o u n n c o t r i m o a n l P L u o s c h k 5 a l P l u s o h p e 5 r a s t e i c o o n n d b s u t t t o o n * * s e c ( o n n o d s t t i o n c U l n u l d o i c n k g b T a o c u k c h t ) 26
Rugged Tablet PC 2.2.2 How to use Hotkey Function Hotkey Function Use the HotTab software utility to make it easy to program and define hot key by customer’s usual application. Long press (3~4 seconds) the “F1” button on the top of your M970D and you can see the software application at center of desktop. Choose one software as your hotkey function. After software application which you immediately when you short button.
Rugged Tablet PC Utilities Function A. The first is virtual mouse B. Screen rotation C. Onscreen Keyboard D.
Rugged Tablet PC 1 F1 Short function key You can set F1 button as a hotkey to open the programs listed on menu or use “Browse” and choose the execution program file. 2 Power Manage function 3 System Information When you press “menu button” 4 Low battery warning: When the battery under 10%, system will show the battery low to remind you to change the new battery or insert adapter to charge.
Rugged Tablet PC 2.2.3 Connecting to a Wireless Network To connect to a wireless network: 1. Push “Menu” button 4 times and making sure the “On”. Wireless function is 2. Please using the defult Windows Wireless Network Connection utility.
Rugged Tablet PC 2.2.4 Using the Bluetooth Wireless Feature We apply Bluetooth 2.1+ EDR module for default function of the Tablet PC series. Depending on your application, the Bluetooth module can give you capability for short-range wireless communicaitons between devices without requiring a cable connection. The transmission can go through walls, pockets and briefcases as long as two devices are within range around 10 meters. Following the easy step to connect to the Bluetooth communication. 1.
Rugged Tablet PC 1. Choose the bluetooth device you want to connect, and left click to choose “Connect”. Then the device will be connected to the module. 2. When under connecting, left check the connection status, or choose “Unplug” to remove the connection.
Rugged Tablet PC 2.2.4 Using the 3G Feature (Optional) We apply a PCI Express® full size 3G module for optional function of the Tablet PC series. Depending on your application, the 3G module can datacard and host PC software combination deliver multiband CDMA2000® 1xEV-DO, UMTS, and GSM wireless wide area network (WWAN) connectivity in a single hardware configuration. 1. Push “Menu” button 4 times and “On”. making sure the 3G Module is 2.
Rugged Tablet PC 3. Confirm whether to detect the telecommunications system operators, then press the “Connect” connect to 3G networks.
Rugged Tablet PC 4. After initialization is completed, it will automatically connect to 3G networks. Note: No additional driver installation is required for 3G module.
Rugged Tablet PC 2.2.6 Using the Camera Feature We apply a internal 2M Pixels Web Camera module for default function of the Tablet PC series. 1. Push “Menu” button 4 times and is “On”. making sure the Camera function 2. Press “F1” button about 5 seconds to Then choose the camera function. into the HotTab utilities menu. 3. Click the icon to take a picture. * Picture & video save path: C:\Webcam 36
Rugged Tablet PC CHAPTER 3 Tablet PC Power Management 37
Rugged Tablet PC CHAPTER 3 TABLET PC POWER MANAGEMENT 3.1 About AC Adapter Our Tablet PC support one set of AC adapter and power cord by country area. Please contact with your dealer for appropriate power cord if necessary. **Caution 1. When you disconnect the disconnect from the outlet first and then from A reverse procedure may AC adapter or tablet PC. AC adapter, electrical the tablet PC. damage the 2. Always hold the plug head unplug the connector, the cord. when you never pull out 3.
Rugged Tablet PC 3.2 Charging and Checking Charging Status 3.2.1 Charging the Battery Pack The battery pack is the internal power source for the tablet PC. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the tablet PC. When your applications often access peripherals, you will experience a shorter operating time. NOTE: 1. Charging will not start if the battery’s temperature is below 0 �C (32 �F).
Rugged Tablet PC Any battery level indication is an estimated result. The actual operating time can be different from the estimated time, depending on how you are using the tablet PC. In Windows operating system, you can check the approximate battery level using the battery meter function. To read the battery level in Windows, click the icon on the taskbar. (Click the icon if the tablet PC is using AC power.) 3.2.
Rugged Tablet PC Item 1 2 3 4 5 Description Note Default Packing Accessories 1 piece of Rugged Tablet PC Quick Start Guide. 1 piece of CD for Recovery CD for Operation System (Windows embedded standard 7). 1 piece of CD for M970D Manual. 1 piece of 12V Adapter w/ Standard Power Cord. (Euro / U.S. Std type, 1.
Rugged Tablet PC CHAPTER 4 Expanding Your Tablet PC 42
Rugged Tablet PC CHAPTER 4 EXPANDING YOUR TABLET PC 4.1 How and When to Use BIOS Setup For enter to the Tablet PC BIOS setup, you need to connect with an external USB keyboard, press “Del” key when the prompt appears on the screen during start up. The prompt screen shows only few seconds so need press Del key quickly. **NOTICE Updated BIOS version may be published after the manual is released. Check with the latest version of BIOS on website. You may need to run BIOS setup utility when the below status.
Rugged Tablet PC 4.2 BIOS Functions 4.2.1 Main Menu The Main menu contains the information of the Tablet system including BIOS version, processor RC version, system language, time, and date. 4.2.2 Advanced Menu The Advanced menu contains the selections of PXE OpROM and Watch Dog Timer, and the settings of PCI Subsystem, ACPI, and S5 RTC Wake. Besides, it also contains the configuration information of CPU, Thermal, IDE/SATA, USB, and PPM Configuration.
Rugged Tablet PC 1. CPU Configuration 2.
Rugged Tablet PC 1. IDE / SATA Configuration 2.
Rugged Tablet PC 5. PPM Configuration 4.2.3 Chipset Menu The Chipset menu contains the information of Host Bridge and South Bridge.
Rugged Tablet PC 4.2.4 Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS uses to look for a boot device from which to load the operating system. A brief description of button usage is listed next: 4.2.5 Security Menu In the Security menu, users can set Administrator Password, User Passwaord, and HDD Security Configuration.
Rugged Tablet PC 4.2.6 Save & Exit Menu The Exit menu displays ways of exiting BIOS Setup utility. After finishing with your settings, you must save and exit so that the changes can take effect. Save Canges and Exit saves the changes you have made and exits BIOS Setup utility. Discarding Changes and Exit exits BIOS Setup utility without saving the changes you have made. Save Canges and Rest saves the changes you have made and resets BIOS system.
