User's Manual
Table Of Contents
www.RoperMobile.com CMU056-A1 35
Return To Table of Contents
Operation Guide
USING THE VEHICLE CRADLE
A vehicle adapter/charger is required and is
available through Roper Mobile Technology (Part
Number CS312).
Vehicle Cradle Connector Identication
Back of Unit:
USB Host
USB Client
Power Supply
Fuse
Under the Unit:
Serial Port 1
Serial Port 2
Serial Port 3
Note: When installing and conguring peripherals,
ensure to select the proper Port (1, 2 or 3) and to
connect to the congured port once installation
complete.
Install power supply lead by inserting round
connector into the round connector at the
back of the cradle (refer back to connector
identication).
Turn ring clockwise to hold in place.
Connect other end of connector to cigarette
lighter.
Note:
The Vehicle Cradle requires a power source of
9 to 30 Vdc.
Ensure cigarette lighter connector is clean and
corrosion-free to provide the least electrical
resistance.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
•
•
CBCE340BV with Optional Mount
7
5
6
4
3
2
1