User’s Manual Motorcycle Dashcam ™ DrivePro 20 2021/07
DrivePro 20 Table of Contents 1. Package Contents ............................................................................................. 3 2. System Requirements ...................................................................................... 3 3. Getting Started .................................................................................................. 4 3-1 Overview ........................................................................................................................
DrivePro 20 1. Package Contents The DrivePro 20 dashcam package includes the following items: DrivePro 20 Camera holder Adhesive mounting base 32GB microSD card Quick Start Guide micro USB to USB Type-A power cable 2. System Requirements Desktop or Notebook computer together with a microSD card reader or an adapter. DrivePro Toolbox supports the following operating systems: Windows® 7 Windows® 8 Windows® 8.1 Windows® 10 macOS 10.
DrivePro 20 3. Getting Started 3-1 Overview 1 ○ 3 ○ 6 ○ 5 ○ 7 ○ 2 ○ 4 ○ 1 Power Button ○ 2 LED Indicator ○ 4 ○ 3 Microphone ○ 6 ○ Lens 5 microSD Card Slot ○ Reset Button 9 ○ 8 ○ micro USB Port 8 Protective Case ○ 7 ○ 9 ○ Lanyard Hole 3-2 Inserting a microSD Memory Card A microSD memory card is required before recording. Please use a microSD memory card with 32GB, 64GB, 128GB or 256GB capacity (Class 10 or above). 1. Insert a microSD memory card into the appropriate card slot. 2.
DrivePro 20 The following table shows approximate recording time according to capacity and resolution (for reference only): Capacity Frame Rate Full HD 1080P 60 fps 32GB 64GB 128GB 256GB 2.5 hr 5 hr 10.5 hr 22 hr Full HD 1080P 30 fps 3.5 hr 7 hr 14 hr 29 hr HD 720P 60fps 5.5 hr 11 hr 21.5 hr 45 hr HD 720P 30fps 8.5 hr 17 hr 34.5 hr 70 hr 3-3 Mounting the DrivePro NOTE Installation surface should first be cleaned and dried so 3M adhesive pad can be firmly attached.
DrivePro 20 3-6 Operation Status Operation Vibration Turn on/off dashcam Long press Power Button for 3 s Vibrate 0.5 s Turn on/off Wi-Fi Press Power Button once Vibrate 0.
DrivePro 20 4. Recording Videos 4-1 Normal Recording By default, one video file is saved for every 1 minute of recording. To adjust the recording length, please refer to the Settings section in this manual. When G-sensor detects the DrivePro is idle for 300 seconds, power saving mode will be activated. The DrivePro will be turned off automatically after another 300 seconds. 4-2 Emergency Recording 30% of the storage space will be saved for emergency video files.
DrivePro 20 5. Using the DrivePro App & DrivePro Toolbox 5-1 Connecting to DrivePro App After downloading and installing the DrivePro App from the Google Play or App Store, 1. Tap Settings > Wi-Fi from your mobile device. 2. Select the Wi-Fi network with DP 20 in the SSID. (password is 12345678) 3. Tap the DrivePro icon on the home screen of your mobile device to use the App. 4. Click the links below for detailed operation guidance. iOS: https://help.transcendcloud.
DrivePro 20 Date / Time Set the current date, time, format and time zone. Device Icon Feature G-Sensor Power Management Function/Option Adjust the sensitivity of the G-Sensor. Disable / Low (default) / Medium / High Power saving mode Auto boot when the DrivePro is connected to power SSID Wi-Fi Set Wi-Fi password System Time Synchronized Synchronize the DrivePro’s system time to that of your smart device’s. Format Card Format the microSD memory card.
DrivePro 20 Take the microSD memory card out of the DrivePro, and insert it into a compatible card reader to transfer files to a computer. Option 2: 1. Insert the microSD memory card into the DrivePro. 2. Plug the small end of a USB cable into the USB port located on the right-hand side of the DrivePro. 3. Plug the large end of the cable into an available USB port on your computer. The DrivePro will display the following screen when connected to a computer.
DrivePro 20 6. Troubleshooting If a problem occurs with your DrivePro, please first check the instructions listed below before sending your DrivePro for repair. If you cannot find an ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit the Transcend website for FAQ and Technical Support services (https://www.transcend-info.com/Support). For any hardware issues, please refer to the DrivePro User’s Manual.
DrivePro 20 7. Safety Cautions These usage and safety guidelines are IMPORTANT! Please follow them carefully to ensure your own personal safety, and help protect your DrivePro from potential damages. 1. General use For your safety, do not operate the DrivePro, or use the DrivePro App while driving. Avoid placing the DrivePro in an extreme temperature environment. Do not use the DrivePro in an environment with strong magnetic fields or excessive vibration.
DrivePro 20 8. Specifications DrivePro 20 90.2mm x 30mm x 30mm Dimensions 74g (2.6oz) Weight USB2.0 Connect Interface Memory Card Supported microSD, 32GB/64GB/128GB/256GB memory card (Class 10 or above) Wi-Fi 802.11n Lens F/2.8, 140° (diagonal) MP4 (H.
DrivePro 20 9. Legal Compliance 9-1 EU Compliance Statement Transcend Information hereby declares that all CE marked Transcend products incorporating radio equipment functionality are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.transcend-info.com/eu_compliance Frequency: 2400-2483.
DrivePro 20 may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
DrivePro 20 2. 3. 4. 5. 6. 7. LICENSED SOFTWARE. License Grant. Transcend grants to Customer a personal, non-exclusive, non-transferable, non-distributable, non-assignable, non-sublicensable license to install and use the Licensed Software on the Product in accordance with the terms and conditions of this Agreement. Intellectual Property Rights.
DrivePro 20 THE LICENSED SOFTWARE, OR THE PRODUCT WITH WHICH THE LICENSED SOFTWARE IS ASSOCIATED, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF TRANSCEND HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 8. Limitation of Liability. IN ANY CASE, TRANSCEND 'S LIABILITY ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT WILL BE LIMITED TO THE TOTAL AMOUNT ACTUALLY AND ORIGINALLY PAID AT RETAIL BY CUSTOMER FOR THE PRODUCT.