User’s Manual Body Camera DrivePro Body 20 TS32GDPB20A (Version 1.
Table of Contents 1. Introduction.....................................................................................................................................3 2. System Requirements.................................................................................................................. 4 3. Getting Started...............................................................................................................................5 3-1 Function Buttons......................................
1. Introduction Thank you for purchasing Transcend’s DrivePro Body 20 - an easy to operate wearable video camera that is tailor-made for police officers, security guards and other professionals to capture real time videos and photos of events. The Wi-Fi network allows live streaming to your smartphone.
2. System Requirements System requirements for connecting the DrivePro Body 20 to a computer and for using the DrivePro Body 20 Toolbox: A desktop or a laptop with a working USB port Windows® 7 Windows® 8 Windows® 8.
3. Getting Started 3-1 Function Buttons Warning Indicator Lens Built-in Microphone Recording / Wi-Fi Indicator Power Button Snapshot / Wi-Fi Button 3.
3-2 Charging the DrivePro Body 20 Before use, please ensure that the battery is fully charged. Charge the DrivePro Body 20 via the bundled USB 2.0 to 3.5mm DC power cable. A flashing orange LED light of the warning indicator is visible while charging; the orange LED light will be solid when fully charged. To charge the DrivePro Body 20, you can either: 1. Connect the 3.5mm DC power cable to a wall outlet with the included adapter. 2. Connect the 3.5mm jack of the camera and the USB to a computer.
LED Status Definition Flashing Recording Flashing Recording with Wi-Fi on 4. Recording Videos To start recording, long press the button; you will hear 1 beep, and the red LED light of the recording indicator will flash during recording. To activate Wi-Fi, long press the button while recording, and the LED light will flash from red to blue. To stop recording, long press the button again; you will hear 1 beep. The red LED light will then turn off.
5. Taking Photos To take photos while recording, simply press the button.
6.
7. IPX4 Water Resistant The camera body of the DrivePro Body 20 is IPX4 water resistant (not waterproof), offering protection against splashing water from any direction. However, it is not protected against pressurized water such as from a shower or tap. WARNING: DrivePro Body 20 is not water resistant when connected to the power cable. Failure caused from incorrect use is not covered by the limited warranty. Do not use the DrivePro Body 20 in water as it is not waterproof.
Velcro Note: Clip & Velcro holders Quick Start Guide Warranty Card
9. Specifications Connect Interface USB 2.0 Storage Capacity Built-in MLC-based microSD Dimensions 88.4 mm (L) × 52.2 mm (W)× 19.4 mm (H) 3.48” (L) x 2.06” (W) x 0.76” (H) Weight 88g 3.1 oz Battery Li-Polymer 1530mAh Power Supply Input: AC100V-240V, 50-60Hz, 0.4A Max Output: DC5V 2A Recording Life Up to 3.5 hours* Operating Temperature -20°C (-4°F) ~ 65°C (149°F) -20°C (-4°F) ~ 45°C(113°F)* Video Format H.
Please check the followings: 1. Is your DrivePro Body 20 properly connected to the USB port? If not, unplug and connect it again. Make sure that both ends of the USB cables are properly connected as shown in the User’s Manual. 2. Is your DrivePro Body 20 connected to the Mac keyboard? If yes, try to plug it in an available USB port on your Mac Desktop directly. 3. Is the computer’s USB ports enabled? If not, refer to the user’s manual of your computer (or motherboard) to enable them.
11. Recycling and Environmental Protection Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means that the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
12. Two-year Limited Warranty This product is covered by a Two-year Limited Warranty. Should your product fail under normal use within two years from the original purchase date, Transcend will provide warranty service pursuant to the terms of the Transcend Warranty Policy. Proof of the original purchase date is required for warranty service. Transcend will inspect the product and in its sole discretion repair or replace it with a refurbished product or functional equivalent.
13. GNU General Public License (GPL) Disclosure Firmware incorporated into this product and/or software used for this product may include third party copyrighted software licensed under the GPL (hereinafter referred to as “GPL Software”).
for any purpose other than in connection with the Product or in a manner inconsistent with the design or documentations of the Licensed Software; (b) license, distribute, lease, rent, lend, transfer, assign or otherwise dispose of the Licensed Software or use the Licensed Software in any commercial hosted or service bureau environment; (c) reverse engineer, decompile, disassemble or attempt to discover the source code for or any trade secrets related to the Licensed Software, except and only to the extent t
8. Limitation of Liability. IN ANY CASE, TRANSCEND 'S LIABILITY ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT WILL BE LIMITED TO THE TOTAL AMOUNT ACTUALLY AND ORIGINALLY PAID AT RETAIL BY CUSTOMER FOR THE PRODUCT. The foregoing Disclaimer and Limitation of Liability will apply to the maximum extent permitted by applicable law. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the exclusions and limitations set forth above may not apply. 9.
15. Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.