User’s Manual Dashcam DrivePro 230/250™ (Version 1.
Table of Contents 1. 2. 3. 4. Introduction................................................................................................2 System Requirements.............................................................................3 Package Contents.................................................................................... 3 Getting Started.......................................................................................... 5 4-1 Overview..................................................
1. Introduction Thank you for purchasing Transcend DrivePro 230/250 - an advanced dashcam that is specifically designed to capture real time video of events happening outside your vehicle while driving. Mounted on your car’s windshield, the DrivePro uses a 130° wide angle lens for the best field of view, and records videos in crystal clear Full HD 1080P to ensure all the important details of your trip are recorded. DrivePro 230/250 has built-in GPS receivers to record your driving history.
2. System Requirements System requirements for connecting the DrivePro to a computer and for using the DrivePro™ Toolbox: A desktop or a laptop with a working USB port Windows® 7 Windows® 8 Windows® 8.1 Windows® 10 Mac® OS X 10.8.2 or later System requirements for using DrivePro App on a mobile device: For compatibility information, please refer to the links below: 3.
A 16GB microSD Memory Card A Quick Start Guide A Warranty Card 5
4. Getting Started 4-1 Overview USB Connector Bracket Socket GPS Receiver Speaker Memory Card Socket Emergency Button Reset Button LED Indicator Function Buttons 2.4” LCD Display Microphone Lens 4-2 Inserting a microSD Memory Card You must insert a microSD memory card into the DrivePro before you can start recording. Please use a MLC-based microSD memory card with 8GB, 16GB, 32GB, 64GB or 128GB capacity (Class 10 or above). 1.
2. To remove, push to eject the memory card out of the slot. WARNING: Do not remove the memory card during shutdown to avoid damages to the memory card and loss of recorded videos The following table shows approximate recording time according to capacity and resolution (for reference only): Card (FAT32) Capacity Full HD 1080P 30fps HD 720P 30fps 8GB 1 hr 2 hr 25 min 16GB 2 hr 15 min 4 hr 50 min 32GB 4 hr 30 min 9 hr 40 min 64GB 9 hr 19 hr 20 min 4-3 Mounting the DrivePro 1.
3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the DrivePro to the windshield. 4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position. 5. After the DrivePro is in the best position, turn the adjustment knob clockwise to make sure that the DrivePro is securely locked in place. 4-4 Connecting to Power Note: Insert a microSD memory card before connecting the DrivePro to your car’s lighter socket. 1.
2. Connect the other end of the car adapter to your car’s lighter socket. 3. After the car engine is switched on, the DrivePro will automatically turn on and start recording. 4. After the car engine is switched off, the DrivePro will automatically save the current recording, and power off. Note: Lighter sockets of some types of vehicles will still supply power after the car engine is turned off.
4-5 Function Buttons Mode Video Recording Power/WiFi Browse Files Settings Take Photos Back* Up Down OK Browse/Settings / Video Playback Back* Play/Pause Protected/Unprotected Delete Back* Up Down Delete View Photos *Press and hold the Power On/Off button for 3 seconds to manually turn on/off the DrivePro in any mode. 4-6 LED Indicator Reference Chart LED Status Definition Solid Red Standby Flashing Red Recording 4-7 Setting the Date and Time To set the current date and time: 1.
3. Use / to adjust values, and press to move to the next block. 4. Repeat step 3 above until the date and time settings are complete. 4-8 Setting UTC Timezone To ensure the accuracy of GPS data: 1. During video recording, press the Settings button 2. Use 3. Use / to select UTC, and press / to adjust values, and press 11 . . .
5. Recording Videos 5-1 Recording Screen 1. Recording status indicator 2. Video resolution 3. WIFI on indicator 4. GPS fix indicator 5. Voice record status 6. Battery status 7. Time After the car engine is switched on, the DrivePro will automatically turn on and start recording. By default, one video file is saved for every 3 minutes of recording. To adjust the recording length, please refer to the Settings section in this manual.
30% of the storage space will be saved for emergency video files. Video files recorded in emergency mode are protected from being overwritten. Manual Emergency Recording: During video recording, press the emergency button on the left-hand side of the DrivePro to manually activate emergency recording mode. The emergency icon will appear on the screen when activated.
Note: Please fully charge the DrivePro before using. 6. Browsing Photos and Playing Videos 6-1 Playing Videos / Browsing Photos 1. During video recording, press the Browse button . 2. Use / to select either Normal, Emergency or Snapshot, and press 3. Use / to select the desired video file, and press 4. Press to pause playback. Press . again to resume playback. 14 .
5. Press to return to the video file list. 6-2 Deleting Videos 1. During playback of a video file, press 2. Use / . The message, “Delete?” will pop up. to select “Yes,” and press to delete the file. 6-3 Protecting Videos 1. During playback of a normal video file, press 2. Use / to select “Yes,” and press 15 . The message, “Lock?”, will pop up. to protect the file.
7. Settings In the Settings menu, you can adjust settings of video resolution, recording time and G-Sensor sensitivity. You can also set the date/time/time zone, change the interface language, format the memory card, and upgrade firmwares. 1. During video recording, press the Settings button 2. Use / 3. Use 4. Press / . to select the desired menu option, and press to select the desired setting, and press to return to the Settings menu. . .
Video Stamp: Display the current time of the event or GPS information of the video being recorded. Available options: Disable / Enable Microphone: Turn on/off the microphone during video recording. Available options: Disable / Enable Volume: Set the speaker volume level. Available options 0 ~7 (You can choose 0 to switch on Silent Mode) Light Frequency: Select the appropriate frequency to avoid flashing A/C light.
Delay Power Off: Schedule the DrivePro to shut down at a certain time. Available options: Disable / 10 secs / 30 secs Auto Display Off: Set duration for display to automatically turn off after recording begins. Available options: Never / After 1 min / After 3 mins GPS Status: Display the number of GPS satellites received and GPS signal intensity. Navigation System: Select a navigation system according to your preference.
firmware detection process. The DrivePro will automatically find the latest firmware file. WARNING: NEVER remove the power cord or the microSD memory card while the firmware is being upgraded. If the DrivePro cannot be turned on due to firmware upgrade failure, please contact Transcend customer service for technical support. Restore Defaults: Reset all settings to factory default settings.
8. Using the DrivePro App Developed specifically for iOS and Android devices, the free download DrivePro App allows you to wirelessly view real-time video footages during recording, control DrivePro functions and play videos directly from your mobile devices. 8-1 Downloading and Installing the App 1. Search “DrivePro” on your App Store or Google Play. 2. Download and install the DrivePro App. Once the installation is complete, the App will be displayed on the home screen of your device.
7. The image above will be displayed when you are connecting to the DrivePro. Note: To change the default SSID and the password, go to Settings in the DrivePro App. 9. DrivePro Toolbox Software The DrivePro Toolbox, developed for Windows, features a user-friendly interface that allows you to select and play videos recorded on your DrivePro, and see your driving paths of the recorded videos displayed on maps without the need to install separate codecs. 1. Download the installation files from: http://www.
10. Transferring Files to a Computer To transfer files between the DrivePro’s memory card and your computer: Option 1: Take the microSD memory card out of the DrivePro, and insert to a compatible card reader to transfer files to your computer. Option 2: 1. Insert the microSD memory card into the DrivePro. 2. Plug the small end of a USB cable into the Mini-B USB port located on the right-hand side of the DrivePro. 3. Plug the large end of the cable into an available USB port on your desktop or laptop.
Windows System Tray. *Note: (I:) is an example drive letter – the letter in your “My Computer” window may differ. Your DrivePro is now ready to transfer data just like an external hard drive. To transfer videos, simply drag-and-drop files from the folder that represents the DrivePro. Proper removal of your DrivePro from Windows: 1. Click once on the Removable Hardware icon in the system tray. 2. A Safely Remove Hardware window will pop up. Click to continue. 3.
1. WARNING: To prevent data loss, always follow the proper removal procedures when disconnecting the DrivePro from your computer. 2. When the DrivePro is connected to a computer, it can only be used for transferring files. You will not be able to use any of the DrivePro’s features at this time. Please disconnect your DrivePro from the computer to resume normal function. 3. NEVER use the “format” or “initialize disk” function while the DrivePro is connected to your computer, even if prompted to do so.
11. Troubleshooting If a problem occurs to your DrivePro, please first check the instructions listed below before sending your DrivePro for repair. If you cannot find any ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit Transcend website for FAQ and Technical Support services. For any Hardware issues, please refer to the DrivePro User’s Manual.
12. Safety Cautions These usage and safety guidelines are IMPORTANT! Please follow them carefully to ensure your own personal safety, and help protect your DrivePro from potential damages. General Use For in-car use only. For your safety, do not operate the DrivePro, or use the DrivePro App while driving. Avoid placing the DrivePro in an extreme temperature environment. Avoid splashing water or any other liquids on the DrivePro and accessories.
13. Specifications Panel: 2.4" color LCD Speaker / Microphone: 1.0 Watt / 0.5 mA (built-in) Connect Interface: USB2.0 Storage Capacity: MLC-based MicroSD, 8GB / 16GB / 32GB / 64GB /128GB (Class 10 or above) Control buttons: 4 function buttons 1 emergency recording button 1 reset button Dimensions: 70.2 mm (L) × 63.1mm (W)× 34.5mm (H) Weight: 85g Power Supply Input DC12V~24V (car charger): Output DC5V / 1A Operating Temperature: -20°C (-4°F) ~ 65°C (149°F) Video Formats: H.
1. We strongly recommend the use of MLC-based memory cards to reach the optimal recording performance as car video recorders require extensive read/write. Using TLC-based memory cards on your car video recorder might result in unstable performance. Note: 2. Besides the bundled microSD card, we recommendTranscend’s High Endurance microSD card as an additional purchase to reach the most stable recordingperformance.
14. Recycling and Environmental Protection Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means that the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
15. Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
16. Two-year Limited Warranty This product is covered by a Two-year Limited Warranty. Should your product fail under normal use within two years from the original purchase date, Transcend will provide warranty service pursuant to the terms of the Transcend Warranty Policy. Proof of the original purchase date is required for warranty service. Transcend will inspect the product and in its sole discretion repair or replace it with a refurbished product or functional equivalent.
17. GNU General Public License (GPL) Disclosure Firmware incorporated into this product and/or software used for this product may include third party copyrighted software licensed under the GPL (hereinafter referred to as “GPL Software”).
5. Copying. Customer may not copy the Licensed Software except that one copy of any separate software component of the Licensed Software may be made to the extent that such copying is necessary for Customer's own backup purposes. 6. Open Source. The Licensed Software may contain open source components licensed to Transcend pursuant to the license terms specified as below, (a) GNU General Public License (GPL), the terms of which is currently available at http://www.gnu.org/licenses/gpl.
condition or any subsequent breach thereof. (e) Transcend may assign its rights under this Agreement without condition. (f) This Agreement will be binding upon and will inure to the benefit of the parties, their successors and permitted assigns.
