User Manual

ManualsBrandsTrans Electric ManualsElectronics1080P HD wireless sender

HDMI Wireless

Incorporates HDMI

technology

Model: WTR-1000

1080P Wireless HDMI Transmission

Receiver side support Miracast function

INTRODUCTION

Thank you for purchasing WTR-1000 HDMI Wireless sender. Your satisfaction is very important to

us. WTR-1000 is designed to make the use of your HDTV equipment more comfortable.

WTR-1000 is the ideal product for HD wireless application. Sometime you will find cable connection

is not suitable, long HDMI cable is not available, or cable connection is not an option. You can use

WTR-1000 for you HD wireless application. For example, Home Theater, cross room HD wireless,

meeting room, or game room application.

WTR-1000 now supports Miracast™ Wireless Display. You can launch the wireless display

application on a Miracast™-compatible Smartphone, tablet. allows you to send image or video on your

Smartphone to a HDTV. Anything shows on the Smartphone will also show on the HDTV.

FEATURES AND CONTENTS

Features:

 Support HDMI 1080p wireless transmission.

 Transmitter side with HDMI loopthrough output.

 Less than 500ms low latency.

 Receiver side support Miracast function.

 HDCP compliant.

 Room to room HD wireless transmission.

 Up to 30M L.O.S long distance transmission.

 Low power consumption.

Contents of Package

 WTR-1000 Transmitter main unit *1

 WTR-1000 Receiver main unit *1

 DC 5V/1A power adaptor *1 , MicroUSB Power cable *1

 User’s Manual *1

Summary of content (8 pages)

PAGE 1
HDMI Wireless Incorporates HDMI® technology Model: WTR-1000 1080P Wireless HDMI Transmission Receiver side support Miracast function INTRODUCTION Thank you for purchasing WTR-1000 HDMI Wireless sender. Your satisfaction is very important to us. WTR-1000 is designed to make the use of your HDTV equipment more comfortable. WTR-1000 is the ideal product for HD wireless application. Sometime you will find cable connection is not suitable, long HDMI cable is not available, or cable connection is not an option.
PAGE 2
CONNECTION ILLUSTRATION CONNECTION & OPERATION Transmitter Box TOP Front Back Receiver Box TOP Front Back 2
PAGE 3
Connection : Miracast Mode for Smartphone Step 1: Connect HDMI cable from HDMI output to HDTV. Step 2: Connect USB Power cable (attached) the micro USB end to the power port of WTR-1000 Receiver Box and the USB A to the USB port of TV, Set Top Box or power adapter with USB A port. The LED of WTR-1000 Receiver Box will light on and state into Miracast Mode but at this moment WTR-1000 Receiver Box is not connected to your Smartphone yet.
PAGE 4
Operation : Miracast Mode for Smartphone PAIRING YOUR WTR-1000 Receiver Box EX: Samsung™ Galaxy S3 (support AllShare™ Cast) 1. Tap on the “Settings” of your Smartphone and make sure that the android version of your phone is upgraded to the Android version 4.1.2 or above . (If your android version of Samsung Smartphone is 4.1.2 or above, AllShare™ Cast is built in and workable with WTR-1000) Tap on the Setting and go to “More settings”, then select “AllShare Cast”.
PAGE 5
3. When the pairing is finished successfully. You will see the Screen of Smartphone on your HDTV. Note: 1. Owing to the generic version of android, Miracast is supported in version 4.2.0 and above. So if your Smartphone can not connect to WFD-1000, Please check the version is correct (4.2.0 and above). If the version is not the right version (4.2.0 or above), you are encouraged to ask or wait the device vendors to release the new O.S to support Miracast. 2.
PAGE 6
Connection : Wireless AV Sender Mode for HDMI Source Step 1: Use HDMI cable to connect the HDMI IN of WTR-1000 Transmitter to a Source device (Satellite receiver, CATV STB, BD player, PS3, XBox…) , if you want to watch the source program on the same time , you can use another HDMI cable connected the HDMI OUT to display (HDTV).
PAGE 7
TROUBLE SHOOTING 1. When there is no picture presented, please: Make sure the direct connection from source device to sink device can work properly. Check if all connectors are connected well; check if all cables can support the transmission speed. High Speed HDMI cables are recommended. Unplug the power cable to restart WTR-1000. 2. When there is no sound: Please try to adjust the volume of TV. Check cable connection to see if it fits properly.
PAGE 8
B s s a l C a r o f s t i m i l e h t h t i w y l p m o c o t d n u o f d n a d e t s e t n e e b s a h t n e m p i u q e s i h T : E T O N e d i v o r p o t d e n g i s e d e r a s t i m i l e s e h T . s e l u R C C F e h t f o 5 1 t r a p o t t n a u s r u p , e c i v e d l a t i g i d .