500332 User’s Guide 5.8GHz Wireless A/V Signal Sender Thank you for purchasing your A/V Signal Sender from RadioShack. Please read this user’s guide before installing, setting up, and using your new sender. 15-332 -EN 033110.
Package contents • Transmitter • Receiver • IR Extender • AC Adapter (2) • RCA cable (2) • User’s Guide • Quick Start Features • 5.8 Ghz provides clean transmission from room to room (up to 200 ft away). • Use your existing remote to pause, play, fast forward or control the device you are enjoying. • Gold connectors are designed to enhance the performance of audio and video components by reducing signal loss and interference. 1 Install the Transmitter 1.
Transmitter Antenna Power Indicator IR Extender Front side pointing at A/V source IR sensor within 50 cm o ± 15 . OR OR OR Back view of A/V source. 15-332 -EN 033110.
Receiver Antenna Power Indicator 15-332 -EN 033110.
3. Connect the supplied AC adapter to the DC 12V jack, then plug it into a standard household outlet. 4. Adjust the flip-up antenna so that the dotted side faces the receiver. 2 Install the Receiver 1. Make sure the receiver is off, then connect the receiver to your TV with the RCA cable. 2. Connect the supplied AC adapter to the DC 12V jack, then plug it into a standard household outlet. 3. Adjust the antenna so that the dotted side faces the transmitter.
• If you hear a popping sound when you place the receiver on top of your TV, move the receiver until the popping sound disappears. • S-Video connectors have a special orientation, when you want to use S-Video connection, carefully handle the connector, and make sure the orientation is correct. Push it gently, otherwise, you will break the connector and connector socket of device.
3 Use Your A/V Signal Sender 1. Choose one of the 4 channels by sliding the channel switch to set the transmitter and receiver to the same channel. 2. Turn on the transmitter and receiver. The power indicators light red. 3. Turn on the connected A/V source and TV. Point your remote control (not included) at the receiver and make a selection. Side view of Receiver Side view of Transmitter ON/OFF Remote Switch Connect IR extender Channel Switch Must be set to same channel.
eiver Further Application Use with a VCR, DVD, DSS, Satellite Receiver, or Laser Disc Player connected to a TV You can record transmitted audio and video on your remote VCR and also enjoy the picture and sound on a remote TV at the same time. 1. Make sure the transmitter and receiver are off, then connect the transmitter to your VCR, DVD, DSS or LDP with the supplied RCA cable. For better picture quality, connect your transmitter to the A/V source with a S-Video cable (not included). 2.
Recommended TV connection for dual output VCR Transmitter ANT Receiver 15-332 -EN 033110.
Troubleshooting Problem Possible Solutions No picture or sound • Check the power on/off switches on the Transmitter, Receiver and TV. 15-332 -EN 033110.indd 10 • Make sure the power plug and signal cables are firmly connected. • Check if the channel of transmitter and receiver are set to the same channel. • Make sure that all cables are connected correctly. • Check if there is any discontinuity inside the cable. • If you use S-Video connection, your TV set must be set to “S-Video” mode.
Interference and noise es d TV. • Not synchronised ted. • Screen unlocked tter e • Noisy line across the screen ity your ” 15-332 -EN 033110.indd 11 • Adjust receiver antenna direction for optimal performance. • Adjust transmitter antenna direction for optimal performance. nNote: Antenna does not rotate 360°. Rotating past the point where resistance is felt will result in permanent damage to the device. • Check if the supplied voltage matches the adapter specification.
on Remote control extender does not work nce. e n ion. oth it ar nd k 15-332 -EN 033110.indd 12 • To ensure good infrared remote control operation, aim your remote control at the IR Sensor on the receiver and press the buttons firmly. ( With some remote controls it may be necessary to press and hold each button for about a second). The working angle of the o IR Sensor is +/- 15 and the working distance is no more than 16.4 feet (5m).
e mote trols nd the rking eet ear eries g Important Safety Instructions • Keep your A/V signal sender dry and clean. If it gets wet or dirty, wipe it dry or clean immediately. • Wipe your A/V signal sender with a damp cloth to keep it looking new. • Use and store your signal sender in room temperature environments only. • Modifying the A/V signal sender’s internal components can cause malfunction and might invalidate its warranty.
Receiver Output Level........................................................................... ............................. 1 ± 0.2 Vpp (Audio), 1 ± 0.2 Vpp (Video) S-Video Output Level............................................................. ...................................Y: 1 Vpp ± 0.2 Vpp, C: 228 mV ± 20% IR Extender Output Level.........................................................0 - 10 dBm Operating Frequency......................................... 433.92 MHz Modulation Type............
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. You may contact RadioShack at: RadioShack Customer Relations, 300 RadioShack Circle, Fort Worth, TX 76102 04/08 www.RadioShack.com Protect the environment by recyling used electronics.
