REMOTE CONTROL EXTENDER DSC-IR100A USER MANUAL
Product Description The DSC-IR100A Wireless Infrared Remote Control Extender enables you to extend their range of your present Infrared IR Remote Control so that you can operate VCRs, stereos, Cable Converter, Satellite receivers, etc. Virtually any where within your home. Unlike ordinary remote controls which are only effective in close range. " line of sight" use, The DSC-IR100A uses radio frequencies and can operate through walls, doors, around corners, etc.
Installation Transmitter: You will be using your normal IR remote control and "aiming" it at DSCIR100A IR extender transmitter. 1. Plug the supplied AC adapter into any standard electrical wall outlet. 2. Connect the other end of the AC adapter cable in the"power in" socket located on the side of your transmitter unit. 3. Place the transmitter in the remote location so that it is in the line of sight of the position where you are located (couch, chair, bed, etc.
INSTALLATION DIAGRAM A. Stereo System: B.
C. VCR / TV /Wireless Video System: D.
Care and Maintenance Keep the DSC-IR100A Remote Extender dry. If it gets wet, wipe it dry immediately. Use and store the DSC-IR100A only in normal temperature environm ents.Extreme temperature can shorten the life of electronic devices Handle the DSC-IR100A gently and carefully. Dropping it can damage the circuit board anc can cause it to work improperly. Keep the DSC-IR100A away from dust and dirt, which can cause premature wear of parts.
User Informaton This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The cha nges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.