BTR-5300 Bluetooth music receiver For Car Use with 2.1A powering capability With SBC supported Feature ◎ SBC codec support ◎ A2DP Bluetooth profile supported ◎ 33 feet (10M) effective range ◎ Audio RL audio output ◎ 8 devices ID storable ◎ USB port for powering capability 2.1A ◎ Blue LED for operation, Red LED for indication of USB port ◎ Changeable fuse What’s in the box Main Unit 3.
Setup your BTR-5300 Analogue connection 1. 2. Connect one 3.5mm end of the included cable to headphone jacket on the BTR-5300. Connect the other end to an audio input on your car stereo system (3.5mm 3.5mm or 3.5mm 2 RCA (not included)). 3. Consult your stereo user’s manual for more information on how to accomplish this. 4. Push the BTR-5300 into the cigarette lighter port. 5. The LED light will flash once to show the unit is powered and ready for being paired for your devices.
Pairing of BTR-5300 iPad/ iPhone/ iPod touch 1. Go to Bluetooth manager of your iPad/iPhone/iPod touch by the following steps a .From your iPad/iPhone/iPod touch home page, tap “setting” b. Inside Settings tap on “General” 2. Turn On the Bluetooth function 3. Your iPod/iPhone/iPad will auto searching available device. You will see “Music Receiver” then Tap on it. 3 c. Inside General tap on “Bluetooth” 4. Enter “0000” when the player asks for PIN code (some devices have no need to input PIN).
5. Your iPod/iPhone/iPad connected to BTR-5300 now. And you can play music from your iPod/iPhone/iPad.
Android Smartphone/Tablet( (ver 4.0 as Example) ) 1. Go to Bluetooth manager of your smart phone by the following step a. From your smart phone home page, tap on “setting” 2. Searched Bluetooth Devices will show up, please tap on “Music Receiver” b. Inside the setting, turn on The Bluetooth 3. Enter “0000” when the player asks for PIN code(some devices have no need to input PIN). 5 c. Bluetooth is turned on 4. Once paired, the blue LED light on the BTR-5300 will flash once.
Note: Some devices, such as iPhone, will connect immediately after pairing so the LED will ON. Other devices, such as notebook, may ask you if you wish to connect and LED will go off after pairing until a connection is established. Although the BTR-5300 can only play music from one device at a time, it is capable of being paired to up to 8 devices. It means that you have to enter the PIN code once for each device. You can play the music now.
Troubleshooting You can solve your problems from this section No music out from my car stereo. ◎ Make sure the BTR-5300 is powered. Please check that you have push the BTR-5300 firmly into the cigarette lighter port of your car. If you push it firmly into car cigarette lighter port and still no power, please change the fuse (please check the CHANGE FUSE section for further information. ◎ Make sure your car stereo is switched to AUX in.
Change the fuse BTR-5300 is designed with double protection mechanism, in case if no power for the unit, you can change the fuse by yourself, please follow the steps to change. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.