User Manual
• Lights blue when paired and connected to
your Bluetooth device.
• Blinks blue when not connected to your
Bluetooth device.
• Turns o when the receiver is turned o.
Wirelessly stream music from your iPhone, iPad, or other Bluetooth-enabled device to your
home stereo or other audio device.
Package contents
• Bluetooth Music Receiver • 6 ft. 3.5 mm stereo audio cable
• AC/DC adapter • 3.5 mm jack to RCA stereo audio plug adapter
• Quick Setup Guide
Features
• aptX® audio decoding: The highest Bluetooth stereo audio quality possible
• Supports Near Field Communication (NFC) for easy connection with compatible Bluetooth
devices
• Optical digital audio output: The highest quality audio connection to your home stereo
• Analog stereo audio output: Easily connect to amplied speakers or any device with an audio
input jack
• Wireless range up to 33 feet (10 m)
• Wall mount feature
• Remembers up to eight Bluetooth devices
Note: Music can be played from only one device at a time.
Setting up your Bluetooth Music Receiver
Connecting to an output device
You can choose either analog (good) or digital (best) cables to connect your Bluetooth
Music Receiver, depending on the connections available on your home stereo system.
Digital connection
Using an optical digital audio cable (not included), connect your home stereo system to the
OPTICAL jack on your Bluetooth Music Receiver.
OR
To pair your devices using NFC Fast connection:
Note: Check your Bluetooth device to see if it is compatible with NFC. If it is not, use the steps
above to pair your Bluetooth device.
1 Turn on your receiver by plugging in the AC/DC adapter and sliding the power switch to ON.
The LED indicator blinks on and o slowly. Your receiver is in pairing mode.
2 Turn on Bluetooth on your Bluetooth device.
3 Turn on the NFC function (see documentation that came with your NFC-enabled device).
4 Touch your Smartphone or tablet to the NFC logo ( ) on the top of your receiver, to pair
with your Bluetooth Music Receiver. The LED indicator on the receiver lights blue.
5 When your Smartphone or tablet tells you that the receiver is connected, you can begin
playback.
6 To disconnect, touch your Smartphone or tablet to your Bluetooth Music Receiver again (see
documentation that came with your NFC-enabled device).
Notes:
• Some devices, such as an iPhone, connect immediately after pairing so the LED on the
Bluetooth Music Receiver remains on. Other devices, such as notebook computers, may ask
you if you wish to connect. In this instance, the LED continues to blink until a connection is
established.
• Your Bluetooth Music Receiver saves pairing information for up to eight devices. However, it
can only be connected to and play content from one device at a time.
• When you turn on your Bluetooth Music Receiver, it automatically connects to the last
connected device if that device is in range. To connect to a dierent paired device, you have
to turn o Bluetooth or unpair from the currently paired device and manually connect to
the other paired one.
Analog connection
Using the included 3.5 mm stereo audio cable, connect your home stereo system or other
component to the AUDIO OUT jack on your Bluetooth Music Receiver.
Note: If your home stereo system does not have a 3.5 mm Audio In connector, use the
included 3.5 mm jack to RCA stereo audio plug adapter.
Connecting power:
1 Plug the AC/DC adapter into the DC 5V jack on your receiver.
2 Plug the AC/DC adapter into a wall power outlet and slide the power switch to ON. The LED
indicator begins to blink blue to indicate that the unit is on and ready to be paired to your
Bluetooth devices.
Pairing your devices
Before you can use your Bluetooth Music Receiver with a Bluetooth device, you need to pair
the two. Your receiver can connect to a Bluetooth-enabled device using the Bluetooth settings
on your device or by touching your Bluetooth device to the Bluetooth Music Reciever using
NFC.
To pair your devices using Bluetooth settings:
1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on
and within 33 feet (10 meters) of your receiver.
2 Turn on your receiver by plugging in the AC/DC adapter and sliding the power switch to ON.
The LED indicator blinks on and o slowly. Your receiver is in pairing mode.
3 Turn on Bluetooth on your Bluetooth device, then set it to pairing mode. For more
information, see the documentation that came with your Bluetooth device.
4 On the Bluetooth device, select Music Receiver in the list of found devices.
5 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue
on the receiver.
6 If you are pairing with a computer, make sure that your Bluetooth Music Receiver is
selected as the computer’s default playback device. See the computer’s documentation for
instructions.
LED indicator
QUICK SETUP GUIDE
RF-BTR315 Bluetooth Music Receiver
Final at size 254 mm x 177.8 mm (W x H)
Final fold size 127 mm x 177.8 mm (W x H)
Optical digital audio cable
(not included)
OR
NFC logo
6 ft 3.5 mm stereo audio cable
3.5 mm jack to RCA stereo audio plug adapter
Audio device (such as an audio
receiver)
Before using your new product, please read these instructions to prevent any damage.
v1
R3