1270 Bluetooth audio receiver With A2DP, CSR® aptX® supported and With NFCTM Fast paring and connection. Feature ® ◎aptX codec support ◎NFC Quick link support ◎SBC codec support ◎A2DP Bluetooth profile supported ◎ 33 feet(10M) effective range ◎TOSLINK digital audio output ◎Audio RL audio output ◎8 devices ID storable What’s in the box Main unit AC/DC adaptor 1 3.5mm male 3.
Outlook and connectors Front Top View Back Side View 2
Setup your 11270 11270 with 3.5mm Stereo output and Optical output, but you can use only one output at a time, it means you need to make a switch setting on the back of 11270 like followed Analogue connection 1. Connect one 3.5mm end of the include audio to headphone jacket on the 11270 2. Connect the other end to an audio input on your home stereo system (3.5mm or 3.5mm + 3.5mmm 2 RCA). Consult your stereo user’s manual for more information on how to accomplish this.
Digital connection 1. Connect one TOSLINK cable end to optical jacket on the 11270(recommended) 2. Connect the other end to one TOSLINK input of your home stereo system. Consult your stereo user’s manual for more information on how to accomplish this. 3. Connect AC power adaptor cable to DC input jacket of 11270, AC end to any AC outlet. 4. The LED light will flash once to show the unit is powered and ready for being paired for your devices.
NFC Fast connection and Pairing of 11270 11270 is equipped with a standard NFC tag, there are NDEF information for Bluetooth org and NFC forum defined. Before you can use this feature, you need to check your Smartphone or tablet with NFC function and the operational system is Android 4.1 and above. Start the NFC function STEP1: Check the android operational system Tab the “setting” Choose “about Device” Make sure android version Is 4.
Step3: Fast Connection using NFC TAP the Smartphone to BTR *The message will pop up Please choose YES *Some device will pop up Some will not Pairing First Connection, if connected you can play music now Step4: Disconnected you device and 11270 If you wan to disconnect, you need to tap the Smartphone to 11270 again. Then the connection between 11270 and your device will off.
Pairing your 11270 for no NFC device iPad/iPhone/iPod touch 1. Go to Bluetooth manager of your iPad/iPhone/iPod touch by the following steps a .From your iPad/iPhone/iPod touch home page, tap “setting” 2.Turn On the Bluetooth function b. Inside Settings tap on “General” 3.Your iPod/iPhone/iPad will auto searching available device. You will see “Music Receiver” then Tap on it. 7 c. Inside General tap on “Bluetooth” 4.
5. Your iPod/iPhone/iPad connected to 11270 Now. And You can play music from your iPod/iPhone/iPad. Android Phone/Tablet( (ver 4.0 as Example) ) 1. Go to Bluetooth manager of your smart phone by the following step a. From your smart phone home page, tap on “setting” b. Inside the setting, turn on The Bluetooth 8 c.
2. Searched Bluetooth Devices will show up, please tap on “Music Receiver” 3. Enter “0000” when the player asks for PIN code(some devices have no need to input PIN). 4. Once paired, the blue LED light on the 11270 will flash once. The Blue LED will keep lighted when a connection is established And In your Smartphone there is showed “connected to media audio” Note: Some devices, such as iPhone, will connect immediately after pairing so the LED will ON.
Disconnecting the connection via manual button When you need to disconnect the connected Smartphone, you can push the button on the Top of 11270 then it will on the pairing Mode for new connection Reconnecting your device If you move out of range or turn off the Bluetooth feature on you iPad/iPhone/iPod touch or Smartphone,11270 will disconnected from your device.
Indication of LED There are 2 LEDs in the front Panel, each LED indicate what is the output selection now. Indication Meaning Description Flash once 1 sec per 5 secs Power on /Pairing Waiting for connection Permanent Lighted connected Device and main unit are connected Troubleshooting You can solve your problems from this section No music out from my stereo speaker ◎ Make sure the 11270 is powered.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.