User's Manual

Instructions
“Me First” Personal Answer Domes
™
Congratulations on your purchase of Me First P.A.D.s!
We’re confident that this buzzer system will be the key to unlocking your group’s energy, generating excitement and adding “game show
spirit” to your question and answer activities.
Included in your package:
♦
1 Facilitator Control Unit --including 3 AAA batteries
♦ 12 P.A.D.s (Personal Answer Domes) --including 3 AAA batteries in each dome
Simple Set-up!
1. Turn on the Facilitator Control Unit by pressing and holding the ON/OFF button on the top of the unit for 1-2 seconds until it lights up
RED.
2. Distribute one Player P.A.D. to each participant and direct participants to press and hold the ON/OFF button at the bottom of the P.A.D. for
1-2 seconds until it lights up RED.
3. Once all P.A.D.s. are turned on: Press the RESET button on the Facilitator’s Control Unit to place the system in “Ready” mode. The
participant P.A.D.s will display a YELLOW light and the Facilitator’s light will stay RED.
Easy to Play!
1. Ask your question.
2. Students “buzz in” with their answers by pressing lightly on the dome of their P.A.D.
3. As soon as someone buzzes in first, the Facilitator Unit will light up GREEN. The first responder’s P.A.D. will BLINK GREEN, signaling
that he or she has the “go-ahead” to answer the question. All other participant P.A.D.s will light up RED to signify that their P.A.D.s are
deactivated.
4. If answer is wrong: Press WRONG button on the Facilitator Unit with sound to signal the student get the wrong answer.Then press the
CONTINUE button on the Facilitator Unit. The Facilitator Unit will turn to light up RED. The first responder’s P.A.D. will light up RED,
signifying that this player is “locked out” for the remainder of the question session. All other P.A.D.s will light up YELLOW, signifying
that players may attempt to buzz in again with their answers.
If answer is correct: Press RIGHT button on the Facilitator Unit with sound to signal the student get the right answer; Then press the
RESET button, the Facilitator Unit will light up RED. All the Participant P.A.D.s will light up YELLOW and a new question session can
begin.
End of Play: Press and hold the ON/OFF button on the Facilitator Control Unit to turn off all the P.A.D.s. This convenient feature helps to
prolong battery life. P.A.D.s will turn off automatically after 45 minutes of non-use mode.
Optional Sound Buzzer on Facilitator Unit: It defaults to be
SOUND ON mode when power-on. Press SOUND ON/OFF button to toggle
between 4 different optional sounds . Press and hold this button for 3-5 seconds to toggle between Sound ON/OFF. Facilitator Unit
“beeps” when first responder buzzes in if sound feature is activated.
The effective control distance: 25M.
Storage: To prolong battery life, unit should be stored without depressing the four buttons on the feet of each pad.
To prolong battery life, P.A.D.s will turn off automatically in 5 seconds by blinking red light if the Facilitator Control Unit is OFF.
Have Fun!!! Please call us if you have questions. 800-299-3770 Patent Pending
FCC COMPLIANCE INFORMATION for Me First P.A.D.s:
FCC ID: PKX1301GAMFX and FCC ID: PKX1301GAMFZ
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHROIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.