Product Manual

Step 1.) Slide Gas
Can Rack Side Mounts
into the Gas Can Rack
Step 2.) Secure Gas
Can Rack Slide Mounts
with bolts and nuts
provided.
Trailer Railing
1.) Choose a mounting location
on the rail of your trailer.
2.) Using the the holes already
drilled in the bottom of the
base of the Gas Can Rack mark
the location of the holes and
drill an 11mm hole.
1.) Choose a mounting location on the
wall of your trailer. It should be
directly over a mounting rib support.
2.) Install the two middle screws
Enclosed Trailer
(2) # 14 Hex Tex Self
Tapping Wood Screws
(4) Small Square Neck
Carriage Bolts
(4) Small Nylock Nuts
(2) Large Square Neck
Carriage Bolts
(2) Large Nylock Nuts
INCLUDED HARDWARE
Need Assistance?
Phone: [phone]
Email: [e-mail]
Note: Please make sure the rounded side
of the carriage bolts are mounted on the
inside of the Gas Can Rack. Nut side of the
bolt could damage gas can.