SDS

ManualsBrandsTrafficMaster ManualsArtificial Grass ToolsTurf Seam Glue 28.7 oz. Artificial Grass Seam Adhesive

Safety Data Sheet

Revision Date: 5/28/2020

SECTION 1: Identification and Company Details

Product Name: Turf Seam Glue 28.7oz Artificial Grass Seam Adhesive

Product Code: 1100TM-28

Manufacturer/ Supplier: Q.E.P. Co., Inc.

Address: 1001 Broken Sound Pkwy, NW

Suite A

Boca Raton, FL 33487

Emergency Phone: (800) 424-9300 (24-hour Response / CHEMTREC)

Product Information: (706) 277-5294

Recommended Use:

SECTION 2: Hazard(s) Identification

Classification of the

substance or mixture:

GSH08 Health hazard

Respiratory Sensitizer 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.

GHS07

Signal Word: Danger

Skin irritant 2 H315 Causes skin irritation

Eye irritant 2A H319 Causes serious eye irritation.

Skin Sens. 1 H317 May cause an allergic skin reaction.

STOT SE 3 H335 May cause respiratory irritation.

SECTION 3: Composition / Information on Ingredients

Summary of content (7 pages)

PAGE 1
Safety Data Sheet Revision Date: 5/28/2020 SECTION 1: Identification and Company Details Product Name: Turf Seam Glue 28.7oz Artificial Grass Seam Adhesive Product Code: 1100TM-28 Manufacturer/ Supplier: Address: Q.E.P. Co., Inc.
PAGE 2
4,4’-methylenediphenyl diisocyanate diphenylmethanediisocyanate, isomers and homologues Naphtha (petroleum), Hydrotreated heavy Weight % 2.5-10% 2.5-10% 2.5-10% CAS # 101-68-8 9016-87-9 64741-65-7 SECTION 4: First-Aid Measures Inhalation: Remove to fresh air. If not breathing, administer artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Call a physician or transport to a medical facility. Skin Contact: Clean excess from skin.
PAGE 3
Engineering Controls: Personal Protective Equipment: Skin Protection - Permeation resistant gloves (butyl rubber, nitrile rubber, PVC or polyvinyl alcohol). Eye/Face Protection - Glasses with side shields, chemical splash goggles and/or face shield Components with limit values that require monitoring at the workplace: 101-68-8 4,4'-methylenediphenyl diisocyanate PEL:Ceiling limit value: 0.2 mg/m³, 0.02 ppm REL: Long-term value: 0.05 mg/m³, 0.005 ppm TLV Long-term value: 0.051 mg/m³, 0.
PAGE 4
64741-65-7 Naptha (petroleum) hydrotreated heavy Oral LD50: >5000mg/kg (rat) Dermal LD50: >3000 mg/kg (rabbit) Skin Contact: Sensitization possible through skin contact Additional toxicological information: May cause allergic respiratory reaction. Animal testing have indicated that respiratory sensitization can result from skin contact with MDI. Use skin protection. Preexisting eye, skin and respiratory disorders may be aggravated by exposure to this product.
PAGE 5
EMS: N/A Air: SECTION 15: Proper Shipping Name: Non-Regulated Air – ICAO/IATA Class: N/A UN Number: N/A Label: N/A Sub Class: N/A Packing Group: N/A Pack Instr. Passenger: N/A Pack Instr. Cargo: N/A Regulatory Information Status on Substance Lists: The concentrations shown in this document are maximum levels (weight %) to be used for regulations.
PAGE 6
No No No No No Section 313 requires submission of annual reports of release of toxic chemicals that appear in 40 CFR 372 (for SARA 313). This information must be included in all SDSs that are distributed for this material. Components present in this product at level which could require reporting under the statute are: As Listed 101-68-8 4,4’-methylenediphenyl diisocyanate 9016-87-9 diphenylmethanediisocyanate, isomers and homologues Canada DSL: All components are on the DSL list or exempt.
PAGE 7
Skin Irrit. 2: Skin corrosion/irritation, Hazard Category 2 Eye Irrit. 2A: Serious eye damage/eye irritation, Hazard Category 2A Resp. Sens. 1: Sensitisation - Respirat., Hazard Category 1 Skin Sens.